main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tlv62585drlr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tlv62585drlr: viewers · Ray
package.json tlv62585drlr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tlv62585drlr: specified limits as data (metadata.characteristics, 38 rows from the datasheet) · Ray
README.md tlv62585drlr: specified limits as data (metadata.characteristics, 38 rows from the datasheet) · Ray
tlv62585drlr-etched.fit.json tlv62585drlr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlv62585drlr-etched.glb tlv62585drlr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlv62585drlr-etched.step tlv62585drlr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlv62585drlr.glb Publish 0.1.0 · Ray
tlv62585drlr.kicad_mod Publish 0.1.0 · Ray
tlv62585drlr.kicad_sym Publish 0.1.0 · Ray
tlv62585drlr.lbr Publish 0.1.0 · Ray
tlv62585drlr.step Publish 0.1.0 · Ray

TLV62585DRLR

Texas Instruments · DC-DC Converters · SOT-563

TLV62585DRLR from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin.
2 SW output Switching output connected to internal FET switches and inductor terminal with DC voltage range -0.3V to VIN+0.3V.
3 VIN power_in Power supply voltage input with operating range 2.5V to 5.5V.
4 EN input Device enable input with high-level threshold 1.2V and low-level threshold 0.4V; must not be left floating.
5 FB input Feedback input for internal control loop regulated at 600mV nominal (594-606mV range, PWM mode, 0°C-85°C).
6 NC unconnected No connection pin; leave open or connect to output or AGND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-563
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage at pins VIN, EN, PG VIN, EN, PG -0.3 6 V 5
Voltage at pin FB FB -0.3 3 V 5
Voltage at pin SW (DC) SW -0.3 V DC; printed max is VIN + 0.3 5
Voltage at pin SW (AC) SW -3 9 V AC, less than 10 ns; while switching 5
Operating junction temperature TJ -40 150 °C 5
Storage temperature Tstg -65 150 °C 5
Input voltage range VIN 2.5 5.5 V 5
Output voltage range VOUT 0.6 V printed max is VIN 5
Sink current at PG pin ISINK_PG 1 mA 5
Output current IOUT 0 3 A 5
Operating junction temperature TJ -40 125 °C 5
Shutdown current into VIN ISD 0.7 2 µA EN = Low 6
Under voltage lock out threshold VUVLO 2.3 2.45 V VIN falling 6
Quiescent current into VIN IQ 35 µA No load, device not switching 6
Under voltage lock out hysteresis VUVLO hys 150 mV 6
Thermal shutdown threshold TJSD 150 °C TJ rising 6
Thermal shutdown hysteresis TJSD hys 20 °C 6
High-level input voltage EN VIH 1.2 V VIN = 2.5 V to 5.5 V 6
Low-level input voltage EN VIL 0.4 V VIN = 2.5 V to 5.5 V 6
Soft start time tSS 900 µs Time from EN high to 95% of VOUT nominal 6
Power good threshold, rising VPG 95 % VOUT rising, referenced to VOUT nominal 6
Power good threshold, falling VPG 90 % VOUT falling, referenced to VOUT nominal 6
Low-level output voltage at PG VPG,OL 0.4 V Isink = 1 mA 6
Input leakage current into PG pin IPG,LKG 0.01 µA VPG = 5.0 V 6
Power good delay tPG,DLY 40 µs VFB falling 6
Feedback regulation voltage VFB 594 600 606 mV PWM mode, 2.5 V ≤ VIN ≤ 5.5 V, 0°C to 85°C 6
Feedback regulation voltage VFB 588 600 612 mV PWM mode, 2.5 V ≤ VIN ≤ 5.5 V, -40°C to 125°C 6
Feedback input leakage current IFB,LKG 0.01 µA VFB = 0.6 V 6
Output discharge FET on-resistance RDIS 10 Ω EN = Low, VOUT = 1.8 V 6
High-side FET on-resistance RDS(on) 56 mΩ 6
Low-side FET on-resistance RDS(on) 32 mΩ 6
High-side FET switch current limit ILIM 4 4.6 A 6
PWM switching frequency fSW 1.5 MHz VOUT = 1.8V, IOUT = 1 A 6
Junction-to-ambient thermal resistance (DRL SOT) RθJA 132.7 °C/W DRL [SOT] package 5
Junction-to-case (top) thermal resistance (DRL SOT) RθJC(top) 43.8 °C/W DRL [SOT] package 5
Junction-to-board thermal resistance (DRL SOT) RθJB 27.3 °C/W DRL [SOT] package 5
Junction-to-top characterization parameter (DRL SOT) ψJT 1.2 °C/W DRL [SOT] package 5
Junction-to-board characterization parameter (DRL SOT) ψJB 26.6 °C/W DRL [SOT] package 5

CAD (KiCad official)

  • Symbol: TLV62585DRLR
  • Footprint: Package_TO_SOT_SMD:SOT-563
  • 3D model: SOT-563 (KiCad packages3D, STEP)
  • 3D model files: tlv62585drlr-etched.step / tlv62585drlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv62585drlr.step / tlv62585drlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 b86da7682db78a2b, retrieved 2026-09-24, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF