Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TLV62569APDRLR

Texas Instruments · DC-DC Converters · SOT-563

TLV62569APDRLR from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback pin for the internal control loop, connect to external feedback divider.
2 GND power_in Ground pin.
3 VIN power_in Power supply voltage input for 2.5 V to 5.5 V.
4 SW output Switch pin connected to internal FET switches and inductor terminal for output filter.
5 EN input Device enable logic input; logic high enables device, logic low disables and enters shutdown; do not leave floating.
6 PG output Power good open-drain output pin for TLV62569APDRL; pull-up resistor should not exceed 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-563
Category Power Management (PMIC)
Pins 6

CAD (KiCad official)

  • Symbol: TLV62569APDRLR
  • Footprint: Package_TO_SOT_SMD:SOT-563
  • 3D model: SOT-563 (KiCad packages3D, STEP)
  • 3D model files: tlv62569apdrlr-etched.step / tlv62569apdrlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv62569apdrlr.step / tlv62569apdrlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 60bb6fcb24b14fa4, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF