component
TLV62568PDRLR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOT-563. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV62568PDRLR
Texas Instruments · DC-DC Converters · SOT-563
TLV62568PDRLR from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback pin for control loop with nominal regulation voltage of 0.6V (0.588V to 0.612V); connect to external feedback divider. |
| 2 | GND | power_in | Ground pin. |
| 3 | VIN | power_in | Power supply voltage input, operating range 2.5V to 5.5V. |
| 4 | SW | power_in | Switch pin connected to internal FET switches and inductor terminal; connect inductor of output filter to this pin. |
| 5 | EN | input | Device enable input; logic high (0.95V to 1.2V) enables, logic low (0.4V to 0.85V) disables and enters shutdown mode; do not leave floating. |
| 6 | PG | output | Power good open-drain output for TLV62568P; asserts high-impedance when output voltage ≥95% nominal and driven low when <90% nominal; requires pull-up resistor ≤5.5V; leave floating if unused. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-563 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TLV62568PDRLR - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
tlv62568pdrlr-etched.step/tlv62568pdrlr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv62568pdrlr.step/tlv62568pdrlr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
167f96484286c9e2, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).