component
TLV62130ARGTR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+170−8@@ -1,13 +1,180 @@ {+ "schema_version": 1,+ "type": "component", "slug": "tlv62130argtr",+ "title": "TLV62130ARGTR",+ "brief": "Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "tlv62130argtr" ],+ "component": {+ "mpn": "TLV62130ARGTR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/tlv62130a.pdf",+ "parts": {+ "symbol": "tlv62130argtr.kicad_sym",+ "footprint": "tlv62130argtr.kicad_mod",+ "model_3d": "tlv62130argtr.glb",+ "model_3d_step": "tlv62130argtr.step",+ "lbr": "tlv62130argtr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "SW",+ "type": "output",+ "description": "Switch node connected to the internal MOSFET switches. Connect the external power inductor between SW and the output capacitor. Pins 1, 2, and 3 are internally tied."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "output",+ "description": "Switch node connected to the internal MOSFET switches. Connect the external power inductor between SW and the output capacitor. Pins 1, 2, and 3 are internally tied."+ },+ {+ "number": "3",+ "name": "SW",+ "type": "output",+ "description": "Switch node connected to the internal MOSFET switches. Connect the external power inductor between SW and the output capacitor. Pins 1, 2, and 3 are internally tied."+ },+ {+ "number": "4",+ "name": "PG",+ "type": "output",+ "description": "Power Good output (open-drain). High impedance when VOUT is within regulation, low when VOUT is below nominal regulation. Requires an external pull-up resistor; sinks up to 10 mA."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Voltage feedback input. Connect a resistive voltage divider from VOUT to this pin to program the adjustable output voltage (0.9 V to 5.5 V)."+ },+ {+ "number": "6",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground. Must be connected directly to the exposed thermal pad and the common ground plane."+ },+ {+ "number": "7",+ "name": "FSW",+ "type": "input",+ "description": "Switching frequency select. Low approx 2.5 MHz, High approx 1.25 MHz for typical operation. Internal pull-down keeps logic low if the pin is floating; connect FSW to VOUT or PG for high setting."+ },+ {+ "number": "8",+ "name": "DEF",+ "type": "input",+ "description": "Output voltage scaling select. Low = nominal VOUT, High = nominal + 5%. Internal pull-down resistor keeps the logic level low when the pin is floating."+ },+ {+ "number": "9",+ "name": "SS/TR",+ "type": "input",+ "description": "Soft-Start / Tracking pin. An external capacitor sets the internal voltage-reference rise time; can also be used as a tracking and sequencing input."+ },+ {+ "number": "10",+ "name": "AVIN",+ "type": "power_in",+ "description": "Supply voltage for the control circuitry (3 V to 17 V). Connect to the same source as PVIN."+ },+ {+ "number": "11",+ "name": "PVIN",+ "type": "power_in",+ "description": "Supply voltage for the power stage (3 V to 17 V). Connect to the same source as AVIN. Pins 11 and 12 are internally tied."+ },+ {+ "number": "12",+ "name": "PVIN",+ "type": "power_in",+ "description": "Supply voltage for the power stage (3 V to 17 V). Connect to the same source as AVIN. Pins 11 and 12 are internally tied."+ },+ {+ "number": "13",+ "name": "EN",+ "type": "input",+ "description": "Enable input. High = device enabled, Low = device disabled/shutdown (< 2 uA). Absolute maximum -0.3 V to VIN+0.3 V."+ },+ {+ "number": "14",+ "name": "VOS",+ "type": "input",+ "description": "Output voltage sense pin and connection point for the control loop circuitry. Route this pin directly to the output node."+ },+ {+ "number": "15",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground. Must be connected directly to the exposed thermal pad and the common ground plane. Pins 15 and 16 are internally tied."+ },+ {+ "number": "16",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground. Must be connected directly to the exposed thermal pad and the common ground plane. Pins 15 and 16 are internally tied."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "power_in",+ "description": "Exposed thermal pad. Must be connected to AGND (pin 6), PGND (pins 15, 16) and the common ground plane, and soldered to the PCB to achieve appropriate power dissipation and mechanical reliability."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/tlv62130a.pdf",+ "pages": 41,+ "sha256": "62f8ffdeab73ad95",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "VQFN-16-EP(3x3)",+ "Category": "PMIC",+ "Pins": "17"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "tlv62130argtr"+ ],+ "discovery_pitch": "TLV62130ARGTR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +192,5 @@ "docs/tlv62130argtr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }