← Commit history

Initial commit: component/tlv62095rgtr

Ray ·ab3542b86f ·
2 files changed +251
README.mdadded+53
@@ -0,0 +1,53 @@+# TLV62095RGTR++**Texas Instruments** · DC-DC Converters · VQFN-16-EP(3x3)++TLV62095RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switch pin of the power stage for controlling the synchronous step-down converter switching action. |+| 2 | SW | output | Switch pin of the power stage for controlling the synchronous step-down converter switching action. |+| 3 | DEF | input | Internal logic control pin requiring pull-high configuration; must be directly connected to AVIN pin. |+| 4 | PG | tri_state | Power good open-drain output; pulls low when output voltage falls below 90% and high-impedance when above 95%; sink current to 1.0 mA max. |+| 5 | FB | input | Feedback pin for output voltage regulation; accepts divided feedback voltage with regulation voltage 0.8V typical and 0.04%/A load regulation. |+| 6 | AGND | power_in | Analog ground reference for internal analog circuits and external feedback divider network. |+| 7 | CP | passive | Charge pump flying capacitor node; connect external 10nF capacitor between CP and CN pins. |+| 8 | CN | passive | Charge pump flying capacitor node; connect external 10nF capacitor between CP and CN pins. |+| 9 | SS | input | Soft-start control pin charged with 7.5µA current; external capacitor sets startup time with floating pin providing minimum ~50µs startup. |+| 10 | AVIN | power_in | Analog supply input voltage pin powering internal analog circuitry and control logic. |+| 11 | PVIN | power_in | Power supply input voltage pin; rated 2.5V to 5.5V with typical quiescent current 20µA and 0.6µA shutdown current. |+| 12 | PVIN | power_in | Power supply input voltage pin; rated 2.5V to 5.5V with typical quiescent current 20µA and 0.6µA shutdown current. |+| 13 | EN | input | Enable input with active pull-down resistor 400kΩ; high level 0.65V min to enable, low level 0.4V max to disable device. |+| 14 | PGND | power_in | Power ground providing return path for power stage switching currents and inductor charging/discharging. |+| 15 | PGND | power_in | Power ground providing return path for power stage switching currents and inductor charging/discharging. |+| 16 | VOS | input | Output voltage sense pin requiring direct connection to converter output for closed-loop regulation; typical discharge resistor 200Ω to ground when disabled. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TLV62095RGTR`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tlv62095rgtr-etched.step` / `tlv62095rgtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv62095rgtr.step` / `tlv62095rgtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlv62095.pdf) (29 pp, sha256 `1bc69f14c9c7474b`, retrieved 2026-09-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlv62095rgtr-datasheet.pdf)
page.jsonadded+198
@@ -0,0 +1,198 @@+{+  "slug": "tlv62095rgtr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tlv62095rgtr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tlv62095rgtr.kicad_sym",+    "tlv62095rgtr.kicad_mod",+    "tlv62095rgtr.glb",+    "tlv62095rgtr.step",+    "tlv62095rgtr.lbr",+    "docs/hero.png",+    "docs/tlv62095rgtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLV62095RGTR",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tlv62095.pdf",+    "parts": {+      "symbol": "tlv62095rgtr.kicad_sym",+      "footprint": "tlv62095rgtr.kicad_mod",+      "model_3d": "tlv62095rgtr-etched.glb",+      "model_3d_plain": "tlv62095rgtr.glb",+      "model_3d_step": "tlv62095rgtr-etched.step",+      "model_3d_step_plain": "tlv62095rgtr.step",+      "lbr": "tlv62095rgtr.lbr"+    },+    "distributor_links": {+      "lcsc": "C477931"+    },+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "output",+        "description": "Switch pin of the power stage for controlling the synchronous step-down converter switching action."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "output",+        "description": "Switch pin of the power stage for controlling the synchronous step-down converter switching action."+      },+      {+        "number": "3",+        "name": "DEF",+        "type": "input",+        "description": "Internal logic control pin requiring pull-high configuration; must be directly connected to AVIN pin."+      },+      {+        "number": "4",+        "name": "PG",+        "type": "tri_state",+        "description": "Power good open-drain output; pulls low when output voltage falls below 90% and high-impedance when above 95%; sink current to 1.0 mA max."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Feedback pin for output voltage regulation; accepts divided feedback voltage with regulation voltage 0.8V typical and 0.04%/A load regulation."+      },+      {+        "number": "6",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground reference for internal analog circuits and external feedback divider network."+      },+      {+        "number": "7",+        "name": "CP",+        "type": "passive",+        "description": "Charge pump flying capacitor node; connect external 10nF capacitor between CP and CN pins."+      },+      {+        "number": "8",+        "name": "CN",+        "type": "passive",+        "description": "Charge pump flying capacitor node; connect external 10nF capacitor between CP and CN pins."+      },+      {+        "number": "9",+        "name": "SS",+        "type": "input",+        "description": "Soft-start control pin charged with 7.5µA current; external capacitor sets startup time with floating pin providing minimum ~50µs startup."+      },+      {+        "number": "10",+        "name": "AVIN",+        "type": "power_in",+        "description": "Analog supply input voltage pin powering internal analog circuitry and control logic."+      },+      {+        "number": "11",+        "name": "PVIN",+        "type": "power_in",+        "description": "Power supply input voltage pin; rated 2.5V to 5.5V with typical quiescent current 20µA and 0.6µA shutdown current."+      },+      {+        "number": "12",+        "name": "PVIN",+        "type": "power_in",+        "description": "Power supply input voltage pin; rated 2.5V to 5.5V with typical quiescent current 20µA and 0.6µA shutdown current."+      },+      {+        "number": "13",+        "name": "EN",+        "type": "input",+        "description": "Enable input with active pull-down resistor 400kΩ; high level 0.65V min to enable, low level 0.4V max to disable device."+      },+      {+        "number": "14",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground providing return path for power stage switching currents and inductor charging/discharging."+      },+      {+        "number": "15",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground providing return path for power stage switching currents and inductor charging/discharging."+      },+      {+        "number": "16",+        "name": "VOS",+        "type": "input",+        "description": "Output voltage sense pin requiring direct connection to converter output for closed-loop regulation; typical discharge resistor 200Ω to ground when disabled."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed thermal pad present on package but without assigned pin number; datasheet specifies pad must",+          "exposed pad 17 added from the footprint"+        ],+        "pages_sent": 29,+        "cost_usd": 0.2672,+        "at": "2026-09-23T06:04:31"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tlv62095.pdf",+        "pages": 29,+        "sha256": "1bc69f14c9c7474b",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file