TLV62084DSGR

{
  "slug": "tlv62084dsgr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tlv62084dsgr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlv62084dsgr.kicad_sym",
    "tlv62084dsgr.kicad_mod",
    "tlv62084dsgr.glb",
    "tlv62084dsgr.step",
    "tlv62084dsgr.lbr",
    "docs/hero.png",
    "docs/tlv62084dsgr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlv62084dsgr-hero.glb",
    "tlv62084dsgr-hero.overlay.json",
    "tlv62084dsgr-etched.glb"
  ],
  "component": {
    "mpn": "TLV62084DSGR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-8-EP(2x2)",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tlv62084.pdf",
    "parts": {
      "symbol": "tlv62084dsgr.kicad_sym",
      "footprint": "tlv62084dsgr.kicad_mod",
      "model_3d": "tlv62084dsgr-hero.glb",
      "model_3d_plain": "tlv62084dsgr-etched.glb",
      "model_3d_step": "tlv62084dsgr-etched.step",
      "model_3d_step_plain": "tlv62084dsgr.step",
      "lbr": "tlv62084dsgr.lbr"
    },
    "distributor_links": {
      "lcsc": "C181488",
      "digikey": "296-40605-2-ND",
      "mouser": "595-TLV62084DSGR"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T23:40:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-40605-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TLV62084DSGR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Device enable logic input; logic HIGH enables the device, logic LOW disables it into shutdown, and it must not be left floating."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Power and signal ground."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Power and signal ground."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback terminal for the internal control loop; connect to the external feedback divider to program the output voltage."
      },
      {
        "number": "5",
        "name": "VOS",
        "type": "input",
        "description": "Output voltage sense terminal for the internal control loop; must be connected to the output."
      },
      {
        "number": "6",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power good output that is pulled low when the output voltage is below regulation limits; it can be left floating if unused and sinks typically up to 0.5 mA."
      },
      {
        "number": "7",
        "name": "SW",
        "type": "power_out",
        "description": "Switch terminal connected to the internal MOSFET switches and the inductor; connect the output filter inductor here."
      },
      {
        "number": "8",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply voltage input."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The Exposed Thermal Pad is listed in the pin table (must be connected to GND) but the datasheet give"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0205,
        "at": "2026-11-05T23:39:54"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tlv62084.pdf",
        "pages": 30,
        "sha256": "379c8612154eb2b4",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlv62084dsgr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7672cac8d88d8679800ef3bf90954e7996ea74e8ddb1f157f2d82bca6b2015e4",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlv62084dsgr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ce8befab8a6f63c9d994f1a69b3ca374e8b37177f9a1b2175aa003d73f051e4e",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}