main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tlv62080dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tlv62080dsgr: viewers · Ray
package.json tlv62080dsgr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tlv62080dsgr: specified limits as data (metadata.characteristics, 35 rows from the datasheet) · Ray
README.md tlv62080dsgr: specified limits as data (metadata.characteristics, 35 rows from the datasheet) · Ray
tlv62080dsgr-etched.fit.json tlv62080dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlv62080dsgr-etched.glb tlv62080dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlv62080dsgr-etched.step tlv62080dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlv62080dsgr.glb Publish 0.1.0 · Ray
tlv62080dsgr.kicad_mod Publish 0.1.0 · Ray
tlv62080dsgr.kicad_sym Publish 0.1.0 · Ray
tlv62080dsgr.lbr Publish 0.1.0 · Ray
tlv62080dsgr.step Publish 0.1.0 · Ray

TLV62080DSGR

Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)

TLV62080DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Device enable logic input (absolute maximum rating −0.3 to VIN + 0.3 V); logic HIGH enables device, logic LOW disables to shutdown; must not be left floating.
2 GND power_in Power and signal ground (absolute maximum rating −0.3 to 7 V).
3 GND power_in Power and signal ground (absolute maximum rating −0.3 to 7 V).
4 FB input Feedback input (absolute maximum rating −0.3 to 3.6 V) for internal control loop; connect to external feedback divider to program output voltage.
5 VOS input Output voltage sense input (absolute maximum rating −0.3 to 7 V) for internal control loop; must be connected to output.
6 PG tri_state Power Good open-drain output (absolute maximum rating −0.3 to 7 V, maximum sink current 1 mA); pulled low when output voltage below regulation limits; can be left floating if not used.
7 SW output Switch terminal (absolute maximum rating −0.3 to VIN + 0.3 V; −3.0 to 10 V for AC transients less than 10 ns) connected to internal MOSFET switches and inductor terminal.
8 VIN power_in Power supply voltage input (absolute maximum rating −0.3 to 7 V; recommended operating range 2.5 to 6 V for TLV62080).
9 Thermal Pad power_in Exposed thermal pad connected to GND; must be soldered to achieve appropriate power dissipation and mechanical reliability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range, TLV62080 VIN 2.5 6 V 6
Input voltage range, TLV62080 (recommended operating) VIN 2.5 6 V 5
Operating junction temperature (recommended) TJ -40 125 °C 5
Voltage range, VIN, PG, VOS VIN, PG, VOS -0.3 7 V 5
Voltage range, SW SW -0.3 V Printed max is VIN + 0.3 V 5
Voltage range, SW (AC, less than 10 ns) SW -3 10 V AC, less than 10 ns 5
Voltage range, FB FB -0.3 3.6 V 5
Voltage range, EN EN -0.3 V Printed max is VIN + 0.3 V 5
Power Good sink current PG 1 mA 5
Operating junction temperature range TJ -40 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Feedback regulation voltage VFB 0.438 0.45 0.462 V VIN ≥ 2.5 V and VIN ≥ VOUT + 1 V 6
Feedback input bias current IFB 10 100 nA VFB = 0.45 V 6
Output voltage range VOUT 0.5 4 V 6
High side FET switch current-limit, TLV62080 ILIM 1.6 2.8 4 A Rising inductor current 6
Power good threshold VPG -15 -10 -5 % VOUT falling referenced to VOUT nominal 6
PG leakage current IPG,LKG 0.01 0.1 µA VPG = 5.0 V 6
Input leakage current (EN) ILKG 0.01 0.5 µA 6
Under voltage lock out VUVLO 1.8 2 V Input voltage falling 6
Quiescent current into VIN IQ 30 uA IOUT = 0 mA, Device not switching 6
Shutdown current into VIN ISD 1 µA EN = LOW 6
High level input voltage (EN) VIH 1 V 2.5 V ≤ VIN ≤ 6 V 6
Low level input voltage (EN) VIL 0.4 V 2.5 V ≤ VIN ≤ 6 V 6
Power good low level voltage VOL 0.3 V Isink = 500 µA 6
Power good hysteresis 5 % 6
Output discharge resistor RDIS 1 kΩ EN = LOW, VOUT = 1.8 V 6
High side FET on-resistance RDS(on) 120 mΩ ISW = 500 mA 6
Low side FET on-resistance RDS(on) 90 mΩ ISW = 500 mA 6
Thermal shutdown TJSD 150 °C Temperature rising 6
Thermal shutdown hysteresis 20 °C Temperature falling below TJSD 6
Under voltage lock out hysteresis 120 mV Rising above VUVLO 6
Junction-to-ambient thermal resistance (DSG, 8 pins) θJA 59.7 °C/W 5
Junction-to-case (top) thermal resistance (DSG, 8 pins) θJCtop 70.1 °C/W 5
Junction-to-board thermal resistance (DSG, 8 pins) θJB 30.9 °C/W 5
Junction-to-case (bottom) thermal resistance (DSG, 8 pins) θJCbot 8.6 °C/W 5

CAD (KiCad official)

  • Symbol: TLV62080DSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tlv62080dsgr-etched.step / tlv62080dsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv62080dsgr.step / tlv62080dsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 58a59ba3238e22a3, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF