← Commit history
tlv62080dsgr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+92−12
package.json+50−10@@ -53,49 +53,49 @@ "number": "1", "name": "EN", "type": "input",- "description": "Device enable logic input (absolute maximum rating \u22120.3 to VIN + 0.3 V); logic HIGH enables device, logic LOW disables to shutdown; must not be left floating."+ "description": "Device enable logic input (absolute maximum rating −0.3 to VIN + 0.3 V); logic HIGH enables device, logic LOW disables to shutdown; must not be left floating." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Power and signal ground (absolute maximum rating \u22120.3 to 7 V)."+ "description": "Power and signal ground (absolute maximum rating −0.3 to 7 V)." }, { "number": "3", "name": "GND", "type": "power_in",- "description": "Power and signal ground (absolute maximum rating \u22120.3 to 7 V)."+ "description": "Power and signal ground (absolute maximum rating −0.3 to 7 V)." }, { "number": "4", "name": "FB", "type": "input",- "description": "Feedback input (absolute maximum rating \u22120.3 to 3.6 V) for internal control loop; connect to external feedback divider to program output voltage."+ "description": "Feedback input (absolute maximum rating −0.3 to 3.6 V) for internal control loop; connect to external feedback divider to program output voltage." }, { "number": "5", "name": "VOS", "type": "input",- "description": "Output voltage sense input (absolute maximum rating \u22120.3 to 7 V) for internal control loop; must be connected to output."+ "description": "Output voltage sense input (absolute maximum rating −0.3 to 7 V) for internal control loop; must be connected to output." }, { "number": "6", "name": "PG", "type": "tri_state",- "description": "Power Good open-drain output (absolute maximum rating \u22120.3 to 7 V, maximum sink current 1 mA); pulled low when output voltage below regulation limits; can be left floating if not used."+ "description": "Power Good open-drain output (absolute maximum rating −0.3 to 7 V, maximum sink current 1 mA); pulled low when output voltage below regulation limits; can be left floating if not used." }, { "number": "7", "name": "SW", "type": "output",- "description": "Switch terminal (absolute maximum rating \u22120.3 to VIN + 0.3 V; \u22123.0 to 10 V for AC transients less than 10 ns) connected to internal MOSFET switches and inductor terminal."+ "description": "Switch terminal (absolute maximum rating −0.3 to VIN + 0.3 V; −3.0 to 10 V for AC transients less than 10 ns) connected to internal MOSFET switches and inductor terminal." }, { "number": "8", "name": "VIN", "type": "power_in",- "description": "Power supply voltage input (absolute maximum rating \u22120.3 to 7 V; recommended operating range 2.5 to 6 V for TLV62080)."+ "description": "Power supply voltage input (absolute maximum rating −0.3 to 7 V; recommended operating range 2.5 to 6 V for TLV62080)." }, { "number": "9",@@ -138,6 +138,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tlv62080dsgr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.0,+ 1.98,+ 0.82+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7672cac8d88d8679800ef3bf90954e7996ea74e8ddb1f157f2d82bca6b2015e4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tlv62080dsgr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.0,+ 1.98,+ 0.82+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3cb699cca0bda00948ca9c7a19c9bfecdf57042f611b9f35a26cfcf7ed0fd4a4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -123,7 +123,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tlv62080dsgr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.0,+ 1.98,+ 0.82+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7672cac8d88d8679800ef3bf90954e7996ea74e8ddb1f157f2d82bca6b2015e4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tlv62080dsgr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.0,+ 1.98,+ 0.82+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3cb699cca0bda00948ca9c7a19c9bfecdf57042f611b9f35a26cfcf7ed0fd4a4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -170,4 +210,4 @@ "visibility": { "public": true }-}+}