component
TLV61224DCKR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SC-70-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV61224DCKR
Texas Instruments · DC-DC Converters · SC-70-6
TLV61224DCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Boost converter input voltage; accepts supply voltage range from 0.7 V to 3 V for normal operation. |
| 2 | FB | input | Output voltage feedback input; must be connected to VOUT to sense and regulate the output voltage. |
| 3 | GND | power_in | Control and power ground reference terminal. |
| 4 | VOUT | power_out | Boost converter output voltage; fixed at 3 V nominal with regulated output range of 2.85 V to 3.15 V under load. |
| 5 | L | input | Inductor connection point for external boost converter inductor; recommended inductor values are 4.7 μH. |
| 6 | EN | input | Enable control input; high level enables converter operation, low level enters shutdown mode with minimized battery drain. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TLV61224DCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
tlv61224dckr-etched.step/tlv61224dckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv61224dckr.step/tlv61224dckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
fc7ed98799696228, retrieved 2026-10-01, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).