main
Ray
Publish 0.1.0
f75389a
TLV5638ID
Texas Instruments · Digital To Analog Converters (DAC) · SOIC-8
TLV5638ID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIN | input | Digital serial data input; the 16-bit word (4 control bits and 12 data bits) is shifted in MSB first on the falling edges of SCLK. |
| 2 | SCLK | input | Digital serial clock input, with a maximum serial clock frequency of 20 MHz and minimum SCLK pulse widths of 25 ns high and low. |
| 3 | CS | input | Chip select, digital input active low, used to enable or disable the serial inputs; the shift register contents are transferred to the target latches after 16 bits or when CS rises. |
| 4 | OUTA | output | DAC A analog voltage output from the x2 gain rail-to-rail buffer, specified at 0 V to VDD-0.4 V with RL = 10 kΩ and CL = 100 pF. |
| 5 | AGND | power_in | Analog ground, the most negative supply rail, so the output cannot drive below 0 V and clamps at ground. |
| 6 | REF | bidirectional | Analog reference voltage input/output; as an input it must be between 0 V and VDD-1.5 V, and as an output the internal reference is 1.024 V or 2.048 V nominal, able to source or sink 1 mA. |
| 7 | OUTB | output | DAC B analog voltage output from the x2 gain rail-to-rail buffer, specified at 0 V to VDD-0.4 V with RL = 10 kΩ and CL = 100 pF. |
| 8 | VDD | power_in | Positive power supply, 4.5 V to 5.5 V for 5 V operation or 2.7 V to 3.3 V for 3 V operation, with an absolute maximum of 7 V (VDD to AGND). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Data Acquisition |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply current, internal reference, fast mode, VDD = 5 V | IDD | 4.3 | 7 | mA | No load, Int. ref., fast mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 | |
| Power supply current, internal reference, slow mode, VDD = 5 V | IDD | 2.2 | 3.6 | mA | No load, Int. ref., slow mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 | |
| Power supply current, internal reference, fast mode, VDD = 3 V | IDD | 3.8 | 6.3 | mA | No load, Int. ref., fast mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 | |
| Power supply current, internal reference, slow mode, VDD = 3 V | IDD | 1.8 | 3 | mA | No load, Int. ref., slow mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 | |
| Power supply current, external reference, fast mode, VDD = 5 V | IDD | 3.9 | 6.3 | mA | No load, Ext. ref., fast mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 | |
| Power supply current, external reference, slow mode, VDD = 5 V | IDD | 1.8 | 3 | mA | No load, Ext. ref., slow mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 | |
| Power supply current, external reference, fast mode, VDD = 3 V | IDD | 3.5 | 5.7 | mA | No load, Ext. ref., fast mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 | |
| Power supply current, external reference, slow mode, VDD = 3 V | IDD | 1.5 | 2.6 | mA | No load, Ext. ref., slow mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 | |
| Power-down supply current | 0.01 | 10 | µA | 4 | |||
| Integral nonlinearity (C and I suffixes) | INL | -4 | 1.7 | 4 | LSB | Tested from code 32 to 4095 | 5 |
| Differential nonlinearity | DNL | -1 | 0.4 | 1 | LSB | 5 | |
| Zero-scale error (offset error at zero scale) | EZS | -24 | 24 | mV | 5 | ||
| Gain error | EG | -0.6 | 0.6 | % full scale | 5 | ||
| Output voltage | VO | 0 | V | RL = 10 kΩ; maximum printed as VDD-0.4 V | 5 | ||
| Output load regulation accuracy | -0.25 | 0.25 | % full scale | VO = 4.096 V, 2.048 V, RL = 2 kΩ | 5 | ||
| Low reference voltage (REF configured as output) | Vref(OUTL) | 1.003 | 1.024 | 1.045 | V | 5 | |
| High reference voltage (REF configured as output) | Vref(OUTH) | 2.027 | 2.048 | 2.069 | V | VDD > 4.75 V | 5 |
| Supply voltage, VDD = 5 V range | VDD | 4.5 | 5 | 5.5 | V | VDD = 5 V | 4 |
| Supply voltage, VDD = 3 V range | VDD | 2.7 | 3 | 3.3 | V | VDD = 3 V | 4 |
| High-level digital input voltage | VIH | 2 | V | VDD = 2.7 V | 4 | ||
| High-level digital input voltage | VIH | 2.4 | V | VDD = 5.5 V | 4 | ||
| Low-level digital input voltage | VIL | 0.6 | V | VDD = 2.7 V | 4 | ||
| Low-level digital input voltage (TLV5638C and TLV5638I) | VIL | 1 | V | VDD = 5.5 V | 4 | ||
| Operating free-air temperature, TLV5638I | TA | -40 | 85 | °C | TLV5638I suffix | 4 | |
| Output settling time, full scale, fast mode | ts(FS) | 1 | 3 | µs | RL = 10 kΩ, CL = 100 pF | 6 | |
| Output settling time, full scale, slow mode | ts(FS) | 3.5 | 7 | µs | RL = 10 kΩ, CL = 100 pF | 6 | |
| Output settling time, code to code, fast mode | ts(CC) | 0.5 | 1.5 | µs | RL = 10 kΩ, CL = 100 pF | 6 | |
| Output settling time, code to code, slow mode | ts(CC) | 1 | 2 | µs | RL = 10 kΩ, CL = 100 pF | 6 | |
| Signal-to-noise ratio | SNR | 69 | 74 | dB | fs = 480 kSPS, fout = 1 kHz, RL = 10 kΩ, CL = 100 pF | 6 | |
| Signal-to-noise + distortion | S/(N+D) | 58 | 67 | dB | fs = 480 kSPS, fout = 1 kHz, RL = 10 kΩ, CL = 100 pF | 6 | |
| Spurious free dynamic range | SFDR | 57 | 72 | dB | fs = 480 kSPS, fout = 1 kHz, RL = 10 kΩ, CL = 100 pF | 6 | |
| Setup time, CS low before first negative SCLK edge | tsu(CS-CK) | 10 | ns | 6 | |||
| Setup time, 16th negative SCLK edge before CS rising edge | tsu(C16-CS) | 10 | ns | 6 | |||
| SCLK pulse width high | twH | 25 | ns | 6 | |||
| SCLK pulse width low | twL | 25 | ns | 6 | |||
| Setup time, data ready before SCLK falling edge | tsu(D) | 10 | ns | 6 | |||
| Hold time, data held valid after SCLK falling edge | th(D) | 5 | ns | 6 | |||
| Supply voltage (VDD to AGND) | VDD | 7 | V | 3 | |||
| Reference input voltage range | VREF | -0.3 | V | Upper limit VDD + 0.3 V | 3 | ||
| Digital input voltage range | VI | -0.3 | V | Upper limit VDD + 0.3 V | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Lead temperature | 260 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 3 | |||
| Power rating, D package | 635 | mW | TA ≤ 25°C | 3 |
CAD (KiCad official)
- Symbol:
TLV5638ID - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tlv5638id-etched.step/tlv5638id-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv5638id.step/tlv5638id.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
5e8282e329ce688a, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLV5638ID
**Texas Instruments** · Digital To Analog Converters (DAC) · SOIC-8
TLV5638ID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIN | input | Digital serial data input; the 16-bit word (4 control bits and 12 data bits) is shifted in MSB first on the falling edges of SCLK. |
| 2 | SCLK | input | Digital serial clock input, with a maximum serial clock frequency of 20 MHz and minimum SCLK pulse widths of 25 ns high and low. |
| 3 | CS | input | Chip select, digital input active low, used to enable or disable the serial inputs; the shift register contents are transferred to the target latches after 16 bits or when CS rises. |
| 4 | OUTA | output | DAC A analog voltage output from the x2 gain rail-to-rail buffer, specified at 0 V to VDD-0.4 V with RL = 10 kΩ and CL = 100 pF. |
| 5 | AGND | power_in | Analog ground, the most negative supply rail, so the output cannot drive below 0 V and clamps at ground. |
| 6 | REF | bidirectional | Analog reference voltage input/output; as an input it must be between 0 V and VDD-1.5 V, and as an output the internal reference is 1.024 V or 2.048 V nominal, able to source or sink 1 mA. |
| 7 | OUTB | output | DAC B analog voltage output from the x2 gain rail-to-rail buffer, specified at 0 V to VDD-0.4 V with RL = 10 kΩ and CL = 100 pF. |
| 8 | VDD | power_in | Positive power supply, 4.5 V to 5.5 V for 5 V operation or 2.7 V to 3.3 V for 3 V operation, with an absolute maximum of 7 V (VDD to AGND). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Data Acquisition |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply current, internal reference, fast mode, VDD = 5 V | IDD | | 4.3 | 7 | mA | No load, Int. ref., fast mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 |
| Power supply current, internal reference, slow mode, VDD = 5 V | IDD | | 2.2 | 3.6 | mA | No load, Int. ref., slow mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 |
| Power supply current, internal reference, fast mode, VDD = 3 V | IDD | | 3.8 | 6.3 | mA | No load, Int. ref., fast mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 |
| Power supply current, internal reference, slow mode, VDD = 3 V | IDD | | 1.8 | 3 | mA | No load, Int. ref., slow mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 |
| Power supply current, external reference, fast mode, VDD = 5 V | IDD | | 3.9 | 6.3 | mA | No load, Ext. ref., fast mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 |
| Power supply current, external reference, slow mode, VDD = 5 V | IDD | | 1.8 | 3 | mA | No load, Ext. ref., slow mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 |
| Power supply current, external reference, fast mode, VDD = 3 V | IDD | | 3.5 | 5.7 | mA | No load, Ext. ref., fast mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 |
| Power supply current, external reference, slow mode, VDD = 3 V | IDD | | 1.5 | 2.6 | mA | No load, Ext. ref., slow mode, all inputs = AGND or VDD, DAC latch = 0x800 | 4 |
| Power-down supply current | | | 0.01 | 10 | µA | | 4 |
| Integral nonlinearity (C and I suffixes) | INL | -4 | 1.7 | 4 | LSB | Tested from code 32 to 4095 | 5 |
| Differential nonlinearity | DNL | -1 | 0.4 | 1 | LSB | | 5 |
| Zero-scale error (offset error at zero scale) | EZS | -24 | | 24 | mV | | 5 |
| Gain error | EG | -0.6 | | 0.6 | % full scale | | 5 |
| Output voltage | VO | 0 | | | V | RL = 10 kΩ; maximum printed as VDD-0.4 V | 5 |
| Output load regulation accuracy | | -0.25 | | 0.25 | % full scale | VO = 4.096 V, 2.048 V, RL = 2 kΩ | 5 |
| Low reference voltage (REF configured as output) | Vref(OUTL) | 1.003 | 1.024 | 1.045 | V | | 5 |
| High reference voltage (REF configured as output) | Vref(OUTH) | 2.027 | 2.048 | 2.069 | V | VDD > 4.75 V | 5 |
| Supply voltage, VDD = 5 V range | VDD | 4.5 | 5 | 5.5 | V | VDD = 5 V | 4 |
| Supply voltage, VDD = 3 V range | VDD | 2.7 | 3 | 3.3 | V | VDD = 3 V | 4 |
| High-level digital input voltage | VIH | 2 | | | V | VDD = 2.7 V | 4 |
| High-level digital input voltage | VIH | 2.4 | | | V | VDD = 5.5 V | 4 |
| Low-level digital input voltage | VIL | | | 0.6 | V | VDD = 2.7 V | 4 |
| Low-level digital input voltage (TLV5638C and TLV5638I) | VIL | | | 1 | V | VDD = 5.5 V | 4 |
| Operating free-air temperature, TLV5638I | TA | -40 | | 85 | °C | TLV5638I suffix | 4 |
| Output settling time, full scale, fast mode | ts(FS) | | 1 | 3 | µs | RL = 10 kΩ, CL = 100 pF | 6 |
| Output settling time, full scale, slow mode | ts(FS) | | 3.5 | 7 | µs | RL = 10 kΩ, CL = 100 pF | 6 |
| Output settling time, code to code, fast mode | ts(CC) | | 0.5 | 1.5 | µs | RL = 10 kΩ, CL = 100 pF | 6 |
| Output settling time, code to code, slow mode | ts(CC) | | 1 | 2 | µs | RL = 10 kΩ, CL = 100 pF | 6 |
| Signal-to-noise ratio | SNR | 69 | 74 | | dB | fs = 480 kSPS, fout = 1 kHz, RL = 10 kΩ, CL = 100 pF | 6 |
| Signal-to-noise + distortion | S/(N+D) | 58 | 67 | | dB | fs = 480 kSPS, fout = 1 kHz, RL = 10 kΩ, CL = 100 pF | 6 |
| Spurious free dynamic range | SFDR | 57 | 72 | | dB | fs = 480 kSPS, fout = 1 kHz, RL = 10 kΩ, CL = 100 pF | 6 |
| Setup time, CS low before first negative SCLK edge | tsu(CS-CK) | 10 | | | ns | | 6 |
| Setup time, 16th negative SCLK edge before CS rising edge | tsu(C16-CS) | 10 | | | ns | | 6 |
| SCLK pulse width high | twH | 25 | | | ns | | 6 |
| SCLK pulse width low | twL | 25 | | | ns | | 6 |
| Setup time, data ready before SCLK falling edge | tsu(D) | 10 | | | ns | | 6 |
| Hold time, data held valid after SCLK falling edge | th(D) | 5 | | | ns | | 6 |
| Supply voltage (VDD to AGND) | VDD | | | 7 | V | | 3 |
| Reference input voltage range | VREF | -0.3 | | | V | Upper limit VDD + 0.3 V | 3 |
| Digital input voltage range | VI | -0.3 | | | V | Upper limit VDD + 0.3 V | 3 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 3 |
| Lead temperature | | | | 260 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 3 |
| Power rating, D package | | | | 635 | mW | TA ≤ 25°C | 3 |
## CAD (KiCad official)
- Symbol: `TLV5638ID`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `tlv5638id-etched.step` / `tlv5638id-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv5638id.step` / `tlv5638id.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlv5638.pdf) (27 pp, sha256 `5e8282e329ce688a`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlv5638id-datasheet.pdf)