component
TLV5628IDWR
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# TLV5628IDWR++**Texas Instruments** · Digital To Analog Converters (DAC) · SOIC-16-300mil++TLV5628IDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DACB | output | DACB analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |+| 2 | DACA | output | DACA analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |+| 3 | GND | power_in | Ground return and reference terminal for the device; one end of each DAC resistor string is connected to this pin. |+| 4 | DATA | input | Serial-interface digital data input; data is clocked in MSB first on each falling edge of CLK while LOAD is high. |+| 5 | CLK | input | Serial-interface clock input; data enters on the negative (falling) edge of CLK. |+| 6 | VDD | power_in | Positive supply voltage input for the device. |+| 7 | DACE | output | DACE analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |+| 8 | DACF | output | DACF analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |+| 9 | DACG | output | DACG analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |+| 10 | DACH | output | DACH analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |+| 11 | REF2 | input | Reference voltage input (high-impedance, buffered) for the DAC group; the terminal table lists it for DACB while the detailed description assigns REF2 to DACE through DACH. |+| 12 | LOAD | input | Serial-interface load control; LOAD is pulsed low after all data bits are clocked in to transfer the word to the selected DAC. |+| 13 | LDAC | input | DAC-update latch control; when pulsed low, the new DAC register values are transferred to the DAC outputs. |+| 14 | REF1 | input | Reference voltage input (high-impedance, buffered) for the DAC group; the terminal table lists it for DACA while the detailed description assigns REF1 to DACA through DACD. |+| 15 | DACD | output | DACD analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |+| 16 | DACC | output | DACC analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Data Acquisition |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TLV5628IDWR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)+- 3D model files: `tlv5628idwr-etched.step` / `tlv5628idwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv5628idwr.step` / `tlv5628idwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlv5628) (19 pp, sha256 `e0db43a94297e99f`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlv5628idwr-datasheet.pdf)
page.jsonadded+248@@ -0,0 +1,248 @@+{+ "slug": "tlv5628idwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Digital To Analog Converters (DAC), SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "tlv5628idwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tlv5628idwr.kicad_sym",+ "tlv5628idwr.kicad_mod",+ "tlv5628idwr.glb",+ "tlv5628idwr.step",+ "tlv5628idwr.lbr",+ "docs/hero.png",+ "docs/tlv5628idwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tlv5628idwr-hero.glb",+ "tlv5628idwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TLV5628IDWR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-16-300mil",+ "pin_count": 16,+ "category": "Data Acquisition",+ "subcategory": "Digital To Analog Converters (DAC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tlv5628",+ "parts": {+ "symbol": "tlv5628idwr.kicad_sym",+ "footprint": "tlv5628idwr.kicad_mod",+ "model_3d": "tlv5628idwr-hero.glb",+ "model_3d_plain": "tlv5628idwr.glb",+ "model_3d_step": "tlv5628idwr-etched.step",+ "model_3d_step_plain": "tlv5628idwr.step",+ "lbr": "tlv5628idwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2679663",+ "digikey": "TLV5628IDWR-ND",+ "mouser": "595-TLV5628IDWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T16:14:33Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "TLV5628IDWR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TLV5628IDWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "DACB",+ "type": "output",+ "description": "DACB analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage."+ },+ {+ "number": "2",+ "name": "DACA",+ "type": "output",+ "description": "DACA analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return and reference terminal for the device; one end of each DAC resistor string is connected to this pin."+ },+ {+ "number": "4",+ "name": "DATA",+ "type": "input",+ "description": "Serial-interface digital data input; data is clocked in MSB first on each falling edge of CLK while LOAD is high."+ },+ {+ "number": "5",+ "name": "CLK",+ "type": "input",+ "description": "Serial-interface clock input; data enters on the negative (falling) edge of CLK."+ },+ {+ "number": "6",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply voltage input for the device."+ },+ {+ "number": "7",+ "name": "DACE",+ "type": "output",+ "description": "DACE analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage."+ },+ {+ "number": "8",+ "name": "DACF",+ "type": "output",+ "description": "DACF analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage."+ },+ {+ "number": "9",+ "name": "DACG",+ "type": "output",+ "description": "DACG analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage."+ },+ {+ "number": "10",+ "name": "DACH",+ "type": "output",+ "description": "DACH analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage."+ },+ {+ "number": "11",+ "name": "REF2",+ "type": "input",+ "description": "Reference voltage input (high-impedance, buffered) for the DAC group; the terminal table lists it for DACB while the detailed description assigns REF2 to DACE through DACH."+ },+ {+ "number": "12",+ "name": "LOAD",+ "type": "input",+ "description": "Serial-interface load control; LOAD is pulsed low after all data bits are clocked in to transfer the word to the selected DAC."+ },+ {+ "number": "13",+ "name": "LDAC",+ "type": "input",+ "description": "DAC-update latch control; when pulsed low, the new DAC register values are transferred to the DAC outputs."+ },+ {+ "number": "14",+ "name": "REF1",+ "type": "input",+ "description": "Reference voltage input (high-impedance, buffered) for the DAC group; the terminal table lists it for DACA while the detailed description assigns REF1 to DACA through DACD."+ },+ {+ "number": "15",+ "name": "DACD",+ "type": "output",+ "description": "DACD analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage."+ },+ {+ "number": "16",+ "name": "DACC",+ "type": "output",+ "description": "DACC analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Datasheet conflicts on reference assignment: the Terminal Functions table says REF1 is the reference; The Terminal Functions table lists VDD as type I; it is typed here as power_in (KiCad) as a supply p"+ ],+ "pages_sent": 19,+ "cost_usd": 0.0885,+ "at": "2026-10-08T16:14:03"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tlv5628",+ "pages": 19,+ "sha256": "e0db43a94297e99f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tlv5628idwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tlv5628idwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f86e30eebfde9458356ff80edd2176c2e584d41b7b5ea7c6cc50853b39523b7b",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}