component
TLV5628IDWR
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV5628IDWR
Texas Instruments · Digital To Analog Converters (DAC) · SOIC-16-300mil
TLV5628IDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DACB | output | DACB analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |
| 2 | DACA | output | DACA analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |
| 3 | GND | power_in | Ground return and reference terminal for the device; one end of each DAC resistor string is connected to this pin. |
| 4 | DATA | input | Serial-interface digital data input; data is clocked in MSB first on each falling edge of CLK while LOAD is high. |
| 5 | CLK | input | Serial-interface clock input; data enters on the negative (falling) edge of CLK. |
| 6 | VDD | power_in | Positive supply voltage input for the device. |
| 7 | DACE | output | DACE analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |
| 8 | DACF | output | DACF analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |
| 9 | DACG | output | DACG analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |
| 10 | DACH | output | DACH analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |
| 11 | REF2 | input | Reference voltage input (high-impedance, buffered) for the DAC group; the terminal table lists it for DACB while the detailed description assigns REF2 to DACE through DACH. |
| 12 | LOAD | input | Serial-interface load control; LOAD is pulsed low after all data bits are clocked in to transfer the word to the selected DAC. |
| 13 | LDAC | input | DAC-update latch control; when pulsed low, the new DAC register values are transferred to the DAC outputs. |
| 14 | REF1 | input | Reference voltage input (high-impedance, buffered) for the DAC group; the terminal table lists it for DACA while the detailed description assigns REF1 to DACA through DACD. |
| 15 | DACD | output | DACD analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |
| 16 | DACC | output | DACC analog voltage output of the octal 8-bit DAC, with output range set by the RNG bit to either 1× or 2× the applied reference voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TLV5628IDWR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
tlv5628idwr-etched.step/tlv5628idwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv5628idwr.step/tlv5628idwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
e0db43a94297e99f, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).