main
Ray
Publish 0.1.0
85be09f
TLV5623IDGKR
Texas Instruments · Digital To Analog Converters (DACs) · VSSOP-8
TLV5623IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIN | input | Serial digital data input; the 16-bit word is shifted in MSB first on the falling edges of SCLK and must stay within −0.3 V to VDD + 0.3 V (absolute maximum). |
| 2 | SCLK | input | Serial digital clock input; the maximum serial clock frequency is 20 MHz. |
| 3 | CS | input | Chip select digital input, active low, used to enable and disable the serial inputs. |
| 4 | FS | input | Frame sync digital input used for 4-wire serial interfaces such as the TMS320 DSP interface; a falling edge starts the data shift and the DAC latch updates after 16 bits or on FS rising. |
| 5 | AGND | power_in | Analog ground; the datasheet recommends connecting it to the system analog ground plane. |
| 6 | REFIN | input | Reference analog input voltage, buffered high-impedance input; with VDD = 5 V the reference is 2.048 V to VDD − 1.5 V and with VDD = 3 V it is 1.024 V to VDD − 1.5 V. |
| 7 | OUT | output | DAC analog output from a rail-to-rail x2 buffer; output range is 0 to VDD − 0.1 V at RL = 10 kΩ with load capacitance up to 100 pF. |
| 8 | VDD | power_in | Positive power supply; 4.5 V to 5.5 V when VDD = 5 V and 2.7 V to 3.3 V when VDD = 3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD to AGND) | VDD | 7 | V | 3 | |||
| Reference input voltage range | -0.3 | V | 3 | ||||
| Digital input voltage range | -0.3 | V | 3 | ||||
| Operating free-air temperature range, TLV5623I | TA | -40 | 85 | °C | TLV5623I | 3 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 3 | |||
| Supply voltage, VDD | VDD | 4.5 | 5 | 5.5 | V | VDD = 5 V | 3 |
| Supply voltage, VDD | VDD | 2.7 | 3 | 3.3 | V | VDD = 3 V | 3 |
| High-level digital input voltage | VIH | 2 | V | DVDD = 2.7 V | 3 | ||
| High-level digital input voltage | VIH | 2.4 | V | DVDD = 5.5 V | 3 | ||
| Low-level digital input voltage | VIL | 0.6 | V | DVDD = 2.7 V | 3 | ||
| Low-level digital input voltage | VIL | 1 | V | DVDD = 5.5 V | 3 | ||
| Load resistance | RL | 2 | kΩ | 3 | |||
| Load capacitance | CL | 100 | pF | 3 | |||
| Clock frequency | fCLK | 20 | MHz | 3 | |||
| Operating free-air temperature, TLV5623I | TA | -40 | 85 | °C | TLV5623I | 3 | |
| Supply current, fast mode | IDD | 0.9 | 1.35 | mA | VDD = 5 V, VREF = 2.048 V, No load, All inputs = AGND or VDD, DAC latch = 0x800, Fast | 3 | |
| Supply current, slow mode | IDD | 0.4 | 0.6 | mA | VDD = 5 V, VREF = 2.048 V, No load, All inputs = AGND or VDD, DAC latch = 0x800, Slow | 3 | |
| Supply current, fast mode | IDD | 0.7 | 1.1 | mA | VDD = 3 V, VREF = 1.024 V, No load, All inputs = AGND or VDD, DAC latch = 0x800, Fast | 3 | |
| Supply current, slow mode | IDD | 0.3 | 0.45 | mA | VDD = 3 V, VREF = 1.024 V, No load, All inputs = AGND or VDD, DAC latch = 0x800, Slow | 3 | |
| Zero-scale error (offset error at zero scale) | EZS | -10 | 10 | mV | See Note 6 | 4 | |
| Integral nonlinearity | INL | -0.5 | 0.3 | 0.5 | LSB | RL = 10 kΩ, CL = 100 pF; See Note 4 | 4 |
| Differential nonlinearity | DNL | -0.2 | 0.07 | 0.2 | LSB | RL = 10 kΩ, CL = 100 pF; See Note 5 | 4 |
| Gain error | EG | -0.6 | 0.6 | % of FS voltage | RL = 10 kΩ, CL = 100 pF; See Note 8 | 4 | |
| Voltage output range | VO | 0 | V | RL = 10 kΩ | 4 | ||
| Output load regulation accuracy | -0.25 | 0.1 | 0.25 | % of FS | RL = 2 kΩ, vs 10 kΩ | 4 | |
| Input voltage range (REFIN) | VI | 0 | V | 4 | |||
| High-level digital input current | IIH | -1 | 1 | µA | VI = VDD | 4 | |
| Low-level digital input current | IIL | -1 | 1 | µA | VI = 0 V | 4 | |
| Output settling time, full scale, fast mode | ts(FS) | 3 | 5.5 | µs | RL = 10 kΩ, CL = 100 pF, Fast | 5 | |
| Output settling time, full scale, slow mode | ts(FS) | 9 | 20 | µs | RL = 10 kΩ, CL = 100 pF, See Note 11, Slow | 5 | |
| Reference voltage, Vref to REFIN terminal, VDD = 5 V | Vref | 2.048 | V | VDD = 5 V (see Note 1) | 3 | ||
| Reference voltage, Vref to REFIN terminal, VDD = 3 V | Vref | 1.024 | V | VDD = 3 V (see Note 1) | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TLV5623IDGKR - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv5623idgkr-etched.step/tlv5623idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv5623idgkr.step/tlv5623idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
2f53a7eb1371df7b, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TLV5623IDGKR
**Texas Instruments** · Digital To Analog Converters (DACs) · VSSOP-8
TLV5623IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIN | input | Serial digital data input; the 16-bit word is shifted in MSB first on the falling edges of SCLK and must stay within −0.3 V to VDD + 0.3 V (absolute maximum). |
| 2 | SCLK | input | Serial digital clock input; the maximum serial clock frequency is 20 MHz. |
| 3 | CS | input | Chip select digital input, active low, used to enable and disable the serial inputs. |
| 4 | FS | input | Frame sync digital input used for 4-wire serial interfaces such as the TMS320 DSP interface; a falling edge starts the data shift and the DAC latch updates after 16 bits or on FS rising. |
| 5 | AGND | power_in | Analog ground; the datasheet recommends connecting it to the system analog ground plane. |
| 6 | REFIN | input | Reference analog input voltage, buffered high-impedance input; with VDD = 5 V the reference is 2.048 V to VDD − 1.5 V and with VDD = 3 V it is 1.024 V to VDD − 1.5 V. |
| 7 | OUT | output | DAC analog output from a rail-to-rail x2 buffer; output range is 0 to VDD − 0.1 V at RL = 10 kΩ with load capacitance up to 100 pF. |
| 8 | VDD | power_in | Positive power supply; 4.5 V to 5.5 V when VDD = 5 V and 2.7 V to 3.3 V when VDD = 3 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Data Converters |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD to AGND) | VDD | | | 7 | V | | 3 |
| Reference input voltage range | | -0.3 | | | V | | 3 |
| Digital input voltage range | | -0.3 | | | V | | 3 |
| Operating free-air temperature range, TLV5623I | TA | -40 | | 85 | °C | TLV5623I | 3 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 3 |
| Lead temperature | | | | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 3 |
| Supply voltage, VDD | VDD | 4.5 | 5 | 5.5 | V | VDD = 5 V | 3 |
| Supply voltage, VDD | VDD | 2.7 | 3 | 3.3 | V | VDD = 3 V | 3 |
| High-level digital input voltage | VIH | 2 | | | V | DVDD = 2.7 V | 3 |
| High-level digital input voltage | VIH | 2.4 | | | V | DVDD = 5.5 V | 3 |
| Low-level digital input voltage | VIL | | | 0.6 | V | DVDD = 2.7 V | 3 |
| Low-level digital input voltage | VIL | | | 1 | V | DVDD = 5.5 V | 3 |
| Load resistance | RL | 2 | | | kΩ | | 3 |
| Load capacitance | CL | | | 100 | pF | | 3 |
| Clock frequency | fCLK | | | 20 | MHz | | 3 |
| Operating free-air temperature, TLV5623I | TA | -40 | | 85 | °C | TLV5623I | 3 |
| Supply current, fast mode | IDD | | 0.9 | 1.35 | mA | VDD = 5 V, VREF = 2.048 V, No load, All inputs = AGND or VDD, DAC latch = 0x800, Fast | 3 |
| Supply current, slow mode | IDD | | 0.4 | 0.6 | mA | VDD = 5 V, VREF = 2.048 V, No load, All inputs = AGND or VDD, DAC latch = 0x800, Slow | 3 |
| Supply current, fast mode | IDD | | 0.7 | 1.1 | mA | VDD = 3 V, VREF = 1.024 V, No load, All inputs = AGND or VDD, DAC latch = 0x800, Fast | 3 |
| Supply current, slow mode | IDD | | 0.3 | 0.45 | mA | VDD = 3 V, VREF = 1.024 V, No load, All inputs = AGND or VDD, DAC latch = 0x800, Slow | 3 |
| Zero-scale error (offset error at zero scale) | EZS | -10 | | 10 | mV | See Note 6 | 4 |
| Integral nonlinearity | INL | -0.5 | 0.3 | 0.5 | LSB | RL = 10 kΩ, CL = 100 pF; See Note 4 | 4 |
| Differential nonlinearity | DNL | -0.2 | 0.07 | 0.2 | LSB | RL = 10 kΩ, CL = 100 pF; See Note 5 | 4 |
| Gain error | EG | -0.6 | | 0.6 | % of FS voltage | RL = 10 kΩ, CL = 100 pF; See Note 8 | 4 |
| Voltage output range | VO | 0 | | | V | RL = 10 kΩ | 4 |
| Output load regulation accuracy | | -0.25 | 0.1 | 0.25 | % of FS | RL = 2 kΩ, vs 10 kΩ | 4 |
| Input voltage range (REFIN) | VI | 0 | | | V | | 4 |
| High-level digital input current | IIH | -1 | | 1 | µA | VI = VDD | 4 |
| Low-level digital input current | IIL | -1 | | 1 | µA | VI = 0 V | 4 |
| Output settling time, full scale, fast mode | ts(FS) | | 3 | 5.5 | µs | RL = 10 kΩ, CL = 100 pF, Fast | 5 |
| Output settling time, full scale, slow mode | ts(FS) | | 9 | 20 | µs | RL = 10 kΩ, CL = 100 pF, See Note 11, Slow | 5 |
| Reference voltage, Vref to REFIN terminal, VDD = 5 V | Vref | | 2.048 | | V | VDD = 5 V (see Note 1) | 3 |
| Reference voltage, Vref to REFIN terminal, VDD = 3 V | Vref | | 1.024 | | V | VDD = 3 V (see Note 1) | 3 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TLV5623IDGKR`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tlv5623idgkr-etched.step` / `tlv5623idgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv5623idgkr.step` / `tlv5623idgkr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlv5623.pdf) (27 pp, sha256 `2f53a7eb1371df7b`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tlv5623idgkr-datasheet.pdf)