component
TLV5614IPWR
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV5614IPWR
Texas Instruments · Digital To Analog Converters (DAC) · TSSOP-16
TLV5614IPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVDD | power_in | Digital supply for the serial interface, which can be any value between 2.7 V and 5.5 V and is independent of AVDD. |
| 2 | PD | input | Active-low power-down pin that powers down all DACs (overriding their individual power-down settings) and all output stages. |
| 3 | LDAC | input | Load DAC input; when high, no DAC output updates occur as input data is read into the serial interface, and the DAC outputs update only when LDAC is low. |
| 4 | DIN | input | Serial data input for the 16-bit serial word that sets the DAC address, control bits and 12-bit DAC value. |
| 5 | SCLK | input | Serial clock input, with a serial clock rate of up to 20 MHz as stated in the recommended operating conditions. |
| 6 | CS | input | Chip select input, active low. |
| 7 | FS | input | Frame sync input; the falling edge of the frame sync pulse indicates the start of a serial data frame shifted into the TLV5614. |
| 8 | DGND | power_in | Digital ground for the serial interface. |
| 9 | AGND | power_in | Analog ground for the DACs, reference buffers and output buffers. |
| 10 | REFINCD | input | Voltage reference input for DACs C and D; the reference is 0 to 2.048 V with a 5-V supply or 0 to 1.024 V with a 3-V supply, and voltages above AVDD/2 cause output saturation for large codes. |
| 11 | OUTD | output | Output of DAC D, buffered by a x2 gain rail-to-rail output buffer. |
| 12 | OUTC | output | Output of DAC C, buffered by a x2 gain rail-to-rail output buffer. |
| 13 | OUTB | output | Output of DAC B, buffered by a x2 gain rail-to-rail output buffer. |
| 14 | OUTA | output | Output of DAC A, buffered by a x2 gain rail-to-rail output buffer. |
| 15 | REFINAB | input | Voltage reference input for DACs A and B; the reference is 0 to 2.048 V with a 5-V supply or 0 to 1.024 V with a 3-V supply, and voltages above AVDD/2 cause output saturation for large codes. |
| 16 | AVDD | power_in | Analog supply for the DACs, reference buffers and output buffers, which can be any value between 2.7 V and 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TLV5614IPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tlv5614ipwr-etched.step/tlv5614ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv5614ipwr.step/tlv5614ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
e93484184994576a, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).