component
TLV4112IDGN
Public Made by Adomby adom
Texas Instruments Operational Amplifier, HVSSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV4112IDGN
Texas Instruments · Operational Amplifier · HVSSOP-8-EP
TLV4112IDGN from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1, which delivers more than 300 mA at 5 V, with continuous/RMS output current limited to 350 mA per output at TJ ≤ 105°C. |
| 2 | 1IN− | input | Inverting input of amplifier 1; the common-mode input voltage range is 0 V to VDD − 1.5 V. |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1; the common-mode input voltage range is 0 V to VDD − 1.5 V. |
| 4 | GND | power_in | Ground reference; all voltage values except differential voltages in the absolute maximum ratings are referenced to GND. |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2; the common-mode input voltage range is 0 V to VDD − 1.5 V. |
| 6 | 2IN− | input | Inverting input of amplifier 2; the common-mode input voltage range is 0 V to VDD − 1.5 V. |
| 7 | 2OUT | output | Output of amplifier 2, which delivers more than 300 mA at 5 V, with continuous/RMS output current limited to 350 mA per output at TJ ≤ 105°C. |
| 8 | VDD | power_in | Positive supply; recommended supply voltage is 2.5 V to 6 V, with an absolute maximum of 7 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TLV4112IDGN - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tlv4112idgn-etched.step/tlv4112idgn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv4112idgn.step/tlv4112idgn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
16aa1bf919442e5a, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).