TLV387DBVR

{
  "slug": "tlv387dbvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Precision Op Amps, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "tlv387dbvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlv387dbvr.kicad_sym",
    "tlv387dbvr.kicad_mod",
    "tlv387dbvr.glb",
    "tlv387dbvr.step",
    "tlv387dbvr.lbr",
    "docs/hero.png",
    "docs/tlv387dbvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlv387dbvr-hero.glb",
    "tlv387dbvr-hero.overlay.json",
    "tlv387dbvr-etched.glb"
  ],
  "component": {
    "mpn": "TLV387DBVR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Amplifiers/Comparators",
    "subcategory": "Precision Op Amps",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tlv387.pdf",
    "parts": {
      "symbol": "tlv387dbvr.kicad_sym",
      "footprint": "tlv387dbvr.kicad_mod",
      "model_3d": "tlv387dbvr-hero.glb",
      "model_3d_plain": "tlv387dbvr-etched.glb",
      "model_3d_step": "tlv387dbvr-etched.step",
      "model_3d_step_plain": "tlv387dbvr.step",
      "lbr": "tlv387dbvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C4371166",
      "digikey": "296-TLV387DBVRTR-ND",
      "mouser": "595-TLV387DBVR"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T02:35:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TLV387DBVRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TLV387DBVR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "output",
        "description": "Amplifier output; the datasheet gives no explicit limits for this pin beyond the rail-to-rail output swing of within 5 mV of the supplies under normal test conditions."
      },
      {
        "number": "2",
        "name": "V–",
        "type": "power_in",
        "description": "Negative (lowest) power supply; single-supply operation from 1.7 V to 5.5 V or dual supply from ±0.85 V to ±2.75 V."
      },
      {
        "number": "3",
        "name": "+IN",
        "type": "input",
        "description": "Noninverting input; common-mode range extends 100 mV beyond the supply rails without input crossover distortion."
      },
      {
        "number": "4",
        "name": "–IN",
        "type": "input",
        "description": "Inverting input; the input pins have no antiparallel diodes, so the differential input voltage is limited only by the supply-pin diodes."
      },
      {
        "number": "5",
        "name": "V+",
        "type": "power_in",
        "description": "Positive (highest) power supply; maximum specified supply voltage is 5.5 V single-supply (±2.75 V dual-supply)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbering conflicts within the datasheet on page 3. Figure 4-1 (TLV387 DBV, top view) shows OUT=; Descriptions for +IN and -IN are taken from the Table 4-1 function names plus the general input-spec"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0501,
        "at": "2026-10-18T02:34:10"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tlv387.pdf",
        "pages": 38,
        "sha256": "1be5f3e098d43beb",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlv387dbvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlv387dbvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4e9a82a6d4e6aa9f74b4cf92f644c0b56f56a1b8779014812eafd9cc601f6846",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}