Generated by kicad-footprint-generator · KiCad file format 20260206
TLV3232DGKR
Texas Instruments · IC · VSSOP-8
TLV3232DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Channel 1 comparator output, a push-pull stage that sources and sinks current and must never be connected to another output. |
| 2 | IN1- | input | Inverting input of channel 1. |
| 3 | IN1+ | input | Noninverting input of channel 1. |
| 4 | V- | power_in | Negative (lowest) supply or ground. |
| 5 | IN2+ | input | Noninverting input of channel 2. |
| 6 | IN2- | input | Inverting input of channel 2. |
| 7 | OUT2 | output | Channel 2 comparator output, a push-pull stage that sources and sinks current and must never be connected to another output. |
| 8 | V+ | power_in | Positive (highest) supply; the supply range is 2.7 V to 5.5 V across V+ and V-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | -4 | 0.5 | 4 | mV | VS = 5V, VCM = VS / 2 | 6 |
| Input offset voltage | VIO | -4.5 | 4.5 | mV | VS = 5V, VCM = VS / 2, TA = -40 to 125℃ | 6 | |
| Hysteresis | VHYS | 0.5 | 1.55 | 3 | mV | VS = 5V, VCM = VS / 2 | 6 |
| Input bias current | IB | 0.01 | 10 | nA | VS = 5V, VCM = VS / 2, TA = -40 to 125℃ | 6 | |
| Supply current / Channel | IQ | 200 | 250 | uA | VS = 2.7V and 5V, no load, Output Low | 6 | |
| Propagation delay time, high to-low (single and dual) | tPHL | 15 | 25 | ns | Midpoint of input to midpoint of output, VOD = 50mV | 7 | |
| Propagation delay time, low-to high (single and dual) | tPLH | 15 | 25 | ns | Midpoint of input to midpoint of output, VOD = 50mV | 7 | |
| Supply voltage | VS | 2.7 | 5.5 | V | VS = (V+) - (V-) | 4 | |
| Ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Supply voltage | VS | 6 | V | VS = (V+) - (V-) | 4 | ||
| Differential input voltage | VID | -6 | 6 | V | 4 | ||
| Input pins (IN+, IN-) from (V-) | -0.5 | V | Input pins (IN+, IN-) from (V-) | 4 | |||
| Current into input pins (IN+, IN-) | -10 | 10 | mA | 4 | |||
| Output short-circuit current | -100 | 100 | mA | 4 | |||
| Output short-circuit duration | 10 | s | 4 | ||||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DGK, VSSOP) | RθJA | 154.5 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (DGK, VSSOP) | RθJC(top) | 88.8 | °C/W | 5 | |||
| Junction-to-board thermal resistance (DGK, VSSOP) | RθJB | 49.1 | °C/W | 5 | |||
| Junction-to-top characterization parameter (DGK, VSSOP) | ΨJT | 1.8 | °C/W | 5 | |||
| Junction-to-board characterization parameter (DGK, VSSOP) | ΨJB | 87.4 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TLV3232DGKR - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv3232dgkr-etched.step/tlv3232dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv3232dgkr.step/tlv3232dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
a07d93a06d924075, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).