main
Ray
Publish 0.1.0
fc824e4
TLV3201AIDBVT
Texas Instruments · Comparators · SOT-23-5
TLV3201AIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Push-pull comparator output; VOL and VOH are specified at 4 mA sink and source load. |
| 2 | GND | power_in | Negative supply pin (ground) for the single-supply comparator. |
| 3 | IN+ | input | Positive comparator input whose common-mode range extends 200 mV beyond either supply rail (VEE - 0.2 V to VCC + 0.2 V). |
| 4 | IN- | input | Negative comparator input; signal input pins that swing more than 0.5 V beyond the supply rails must be current limited to 10 mA or less. |
| 5 | VCC | power_in | Positive supply pin; the device is specified for 2.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | 7 | V | 4 | ||||
| Signal input pins voltage | -0.5 | V | Max printed as (VCC) + 0.5 V | 4 | |||
| Signal input pins current | -10 | 10 | mA | 4 | |||
| Output short circuit current | 100 | mA | Short-circuit to ground | 4 | |||
| Operating temperature | -55 | 125 | °C | Operating free-air temperature | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage VS | VS | 2.7 | 5.5 | V | Single supply; dual supply ±1.35 V to ±2.75 V | 4 | |
| Specified temperature | -40 | 125 | °C | 4 | |||
| Junction-to-ambient thermal resistance | RθJA | 237.8 | °C/W | DBV (SOT-23) 5-pin package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 108.7 | °C/W | DBV (SOT-23) 5-pin package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 64.1 | °C/W | DBV (SOT-23) 5-pin package | 4 | ||
| Input offset voltage, TLV3201 | VIO | 1 | 3 | mV | VCC = 5 V; VCM = VCC / 2; TA = 25°C | 5 | |
| Input offset voltage, TLV3201 | VIO | 4 | mV | VCC = 5 V; VCM = VCC / 2; TA = -40°C to 125°C | 5 | ||
| Input offset voltage drift | dVOS/dT | 1 | 10 | µV/°C | VCC = 5 V; TA = -40°C to 125°C | 5 | |
| Power-supply rejection ratio | PSRR | 65 | 85 | dB | VCC = 5 V; VCM = VCC / 2; VCC = 2.5 V to 5.5 V | 5 | |
| Input bias current | IIB | 1 | 50 | pA | VCC = 5 V; VCM = VCC / 2; TA = 25°C | 5 | |
| Input bias current | IIB | 5 | nA | VCC = 5 V; VCM = VCC / 2; TA = -40°C to 125°C | 5 | ||
| Input offset current | IIO | 1 | 50 | pA | VCC = 5 V; VCM = VCC / 2; TA = 25°C | 5 | |
| Input offset current | IIO | 2.5 | nA | VCC = 5 V; VCM = VCC / 2; TA = -40°C to 125°C | 5 | ||
| Common-mode rejection ratio | CMRR | 60 | 70 | dB | VCC = 5 V; -0.2 V < VCM < 5.2 V | 5 | |
| Voltage output swing from lower rail | VOL | 175 | 190 | mV | VCC = 5 V; ISINK = 4 mA; TA = 25°C | 5 | |
| Voltage output swing from lower rail | VOL | 225 | mV | VCC = 5 V; ISINK = 4 mA; TA = -40°C to 125°C | 5 | ||
| Voltage output swing from upper rail | VOH | 120 | 140 | mV | VCC = 5 V; ISOURCE = 4 mA; TA = 25°C | 5 | |
| Voltage output swing from upper rail | VOH | 170 | mV | VCC = 5 V; ISOURCE = 4 mA; TA = -40°C to 125°C | 5 | ||
| Short-circuit current, sinking (per comparator) | ISC | 40 | 48 | mA | VCC = 5 V; per comparator; sinking | 5 | |
| Short-circuit current, sourcing (per comparator) | ISC | 52 | 60 | mA | VCC = 5 V; per comparator; sourcing | 5 | |
| Specified supply voltage | VCC | 2.7 | 5.5 | V | 5 | ||
| Quiescent current | IQ | 40 | 50 | µA | VCC = 5 V; TA = 25°C | 5 | |
| Quiescent current | IQ | 65 | µA | VCC = 5 V; TA = -40°C to 125°C | 5 | ||
| Propagation delay time, low to high | tPD | 47 | 50 | ns | VCC = 5 V; input overdrive = 20 mV; CL = 15 pF | 5 | |
| Propagation delay time, low to high | tPD | 43 | 50 | ns | VCC = 5 V; input overdrive = 100 mV; CL = 15 pF | 5 | |
| Propagation delay time, low to high | tPD | 55 | ns | VCC = 5 V; TA = -40°C to 125°C | 5 | ||
| Propagation delay time, high to low | tPD | 45 | 50 | ns | VCC = 5 V; input overdrive = 20 mV; CL = 15 pF | 5 | |
| Propagation delay time, high to low | tPD | 42 | 50 | ns | VCC = 5 V; input overdrive = 100 mV; CL = 15 pF | 5 | |
| Propagation delay time, high to low | tPD | 55 | ns | VCC = 5 V; TA = -40°C to 125°C | 5 | ||
| Input offset voltage, TLV3201 | VIO | 1 | 3 | mV | VCC = 2.7 V; VCM = VCC / 2; TA = 25°C | 6 | |
| Input offset voltage, TLV3201 | VIO | 4 | mV | VCC = 2.7 V; VCM = VCC / 2; TA = -40°C to 125°C | 6 | ||
| Input offset voltage drift | dVOS/dT | 1 | 10 | µV/°C | VCC = 2.7 V; TA = -40°C to 125°C | 6 | |
| Power-supply rejection ratio | PSRR | 65 | 85 | dB | VCC = 2.7 V; VCM = VCC / 2; VCC = 2.5 V to 5.5 V | 6 | |
| Input bias current | IIB | 1 | 50 | pA | VCC = 2.7 V; VCM = VCC / 2; TA = 25°C | 6 | |
| Input bias current | IIB | 5 | nA | VCC = 2.7 V; VCM = VCC / 2; TA = -40°C to 125°C | 6 | ||
| Input offset current | IIO | 1 | 50 | pA | VCC = 2.7 V; VCM = VCC / 2; TA = 25°C | 6 | |
| Input offset current | IIO | 2.5 | nA | VCC = 2.7 V; VCM = VCC / 2; TA = -40°C to 125°C | 6 | ||
| Common-mode rejection ratio | CMRR | 56 | 68 | dB | VCC = 2.7 V; -0.2 V < VCM < 2.9 V | 6 | |
| Voltage output swing from lower rail | VOL | 230 | 260 | mV | VCC = 2.7 V; ISINK = 4 mA; TA = 25°C | 6 | |
| Voltage output swing from lower rail | VOL | 325 | mV | VCC = 2.7 V; ISINK = 4 mA; TA = -40°C to 125°C | 6 | ||
| Voltage output swing from upper rail | VOH | 210 | 250 | mV | VCC = 2.7 V; ISOURCE = 4 mA; TA = 25°C | 6 | |
| Voltage output swing from upper rail | VOH | 350 | mV | VCC = 2.7 V; ISOURCE = 4 mA; TA = -40°C to 125°C | 6 | ||
| Short-circuit current, sinking (per comparator) | ISC | 13 | 19 | mA | VCC = 2.7 V; per comparator; sinking | 6 | |
| Short-circuit current, sourcing (per comparator) | ISC | 15 | 21 | mA | VCC = 2.7 V; per comparator; sourcing | 6 | |
| Quiescent current | IQ | 36 | 46 | µA | VCC = 2.7 V; TA = 25°C | 6 | |
| Quiescent current | IQ | 60 | µA | VCC = 2.7 V; TA = -40°C to 125°C | 6 | ||
| Propagation delay time, low to high | tPD | 47 | 50 | ns | VCC = 2.7 V; input overdrive = 20 mV; CL = 15 pF | 6 | |
| Propagation delay time, low to high | tPD | 42 | 50 | ns | VCC = 2.7 V; input overdrive = 100 mV; CL = 15 pF | 6 | |
| Propagation delay time, low to high | tPD | 55 | ns | VCC = 2.7 V; TA = -40°C to 125°C | 6 | ||
| Propagation delay time, high to low | tPD | 40 | 50 | ns | VCC = 2.7 V; input overdrive = 20 mV; CL = 15 pF | 6 | |
| Propagation delay time, high to low | tPD | 38 | 50 | ns | VCC = 2.7 V; input overdrive = 100 mV; CL = 15 pF | 6 | |
| Propagation delay time, high to low | tPD | 55 | ns | VCC = 2.7 V; TA = -40°C to 125°C | 6 |
CAD (KiCad official)
- Symbol:
TLV3201AIDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv3201aidbvt-etched.step/tlv3201aidbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv3201aidbvt.step/tlv3201aidbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
358c30340b482fc4, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLV3201AIDBVT
**Texas Instruments** · Comparators · SOT-23-5
TLV3201AIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Push-pull comparator output; VOL and VOH are specified at 4 mA sink and source load. |
| 2 | GND | power_in | Negative supply pin (ground) for the single-supply comparator. |
| 3 | IN+ | input | Positive comparator input whose common-mode range extends 200 mV beyond either supply rail (VEE - 0.2 V to VCC + 0.2 V). |
| 4 | IN- | input | Negative comparator input; signal input pins that swing more than 0.5 V beyond the supply rails must be current limited to 10 mA or less. |
| 5 | VCC | power_in | Positive supply pin; the device is specified for 2.7 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | | | | 7 | V | | 4 |
| Signal input pins voltage | | -0.5 | | | V | Max printed as (VCC) + 0.5 V | 4 |
| Signal input pins current | | -10 | | 10 | mA | | 4 |
| Output short circuit current | | | | 100 | mA | Short-circuit to ground | 4 |
| Operating temperature | | -55 | | 125 | °C | Operating free-air temperature | 4 |
| Junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage VS | VS | 2.7 | | 5.5 | V | Single supply; dual supply ±1.35 V to ±2.75 V | 4 |
| Specified temperature | | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 237.8 | | °C/W | DBV (SOT-23) 5-pin package | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 108.7 | | °C/W | DBV (SOT-23) 5-pin package | 4 |
| Junction-to-board thermal resistance | RθJB | | 64.1 | | °C/W | DBV (SOT-23) 5-pin package | 4 |
| Input offset voltage, TLV3201 | VIO | | 1 | 3 | mV | VCC = 5 V; VCM = VCC / 2; TA = 25°C | 5 |
| Input offset voltage, TLV3201 | VIO | | | 4 | mV | VCC = 5 V; VCM = VCC / 2; TA = -40°C to 125°C | 5 |
| Input offset voltage drift | dVOS/dT | | 1 | 10 | µV/°C | VCC = 5 V; TA = -40°C to 125°C | 5 |
| Power-supply rejection ratio | PSRR | 65 | 85 | | dB | VCC = 5 V; VCM = VCC / 2; VCC = 2.5 V to 5.5 V | 5 |
| Input bias current | IIB | | 1 | 50 | pA | VCC = 5 V; VCM = VCC / 2; TA = 25°C | 5 |
| Input bias current | IIB | | | 5 | nA | VCC = 5 V; VCM = VCC / 2; TA = -40°C to 125°C | 5 |
| Input offset current | IIO | | 1 | 50 | pA | VCC = 5 V; VCM = VCC / 2; TA = 25°C | 5 |
| Input offset current | IIO | | | 2.5 | nA | VCC = 5 V; VCM = VCC / 2; TA = -40°C to 125°C | 5 |
| Common-mode rejection ratio | CMRR | 60 | 70 | | dB | VCC = 5 V; -0.2 V < VCM < 5.2 V | 5 |
| Voltage output swing from lower rail | VOL | | 175 | 190 | mV | VCC = 5 V; ISINK = 4 mA; TA = 25°C | 5 |
| Voltage output swing from lower rail | VOL | | | 225 | mV | VCC = 5 V; ISINK = 4 mA; TA = -40°C to 125°C | 5 |
| Voltage output swing from upper rail | VOH | | 120 | 140 | mV | VCC = 5 V; ISOURCE = 4 mA; TA = 25°C | 5 |
| Voltage output swing from upper rail | VOH | | | 170 | mV | VCC = 5 V; ISOURCE = 4 mA; TA = -40°C to 125°C | 5 |
| Short-circuit current, sinking (per comparator) | ISC | 40 | 48 | | mA | VCC = 5 V; per comparator; sinking | 5 |
| Short-circuit current, sourcing (per comparator) | ISC | 52 | 60 | | mA | VCC = 5 V; per comparator; sourcing | 5 |
| Specified supply voltage | VCC | 2.7 | | 5.5 | V | | 5 |
| Quiescent current | IQ | | 40 | 50 | µA | VCC = 5 V; TA = 25°C | 5 |
| Quiescent current | IQ | | | 65 | µA | VCC = 5 V; TA = -40°C to 125°C | 5 |
| Propagation delay time, low to high | tPD | | 47 | 50 | ns | VCC = 5 V; input overdrive = 20 mV; CL = 15 pF | 5 |
| Propagation delay time, low to high | tPD | | 43 | 50 | ns | VCC = 5 V; input overdrive = 100 mV; CL = 15 pF | 5 |
| Propagation delay time, low to high | tPD | | | 55 | ns | VCC = 5 V; TA = -40°C to 125°C | 5 |
| Propagation delay time, high to low | tPD | | 45 | 50 | ns | VCC = 5 V; input overdrive = 20 mV; CL = 15 pF | 5 |
| Propagation delay time, high to low | tPD | | 42 | 50 | ns | VCC = 5 V; input overdrive = 100 mV; CL = 15 pF | 5 |
| Propagation delay time, high to low | tPD | | | 55 | ns | VCC = 5 V; TA = -40°C to 125°C | 5 |
| Input offset voltage, TLV3201 | VIO | | 1 | 3 | mV | VCC = 2.7 V; VCM = VCC / 2; TA = 25°C | 6 |
| Input offset voltage, TLV3201 | VIO | | | 4 | mV | VCC = 2.7 V; VCM = VCC / 2; TA = -40°C to 125°C | 6 |
| Input offset voltage drift | dVOS/dT | | 1 | 10 | µV/°C | VCC = 2.7 V; TA = -40°C to 125°C | 6 |
| Power-supply rejection ratio | PSRR | 65 | 85 | | dB | VCC = 2.7 V; VCM = VCC / 2; VCC = 2.5 V to 5.5 V | 6 |
| Input bias current | IIB | | 1 | 50 | pA | VCC = 2.7 V; VCM = VCC / 2; TA = 25°C | 6 |
| Input bias current | IIB | | | 5 | nA | VCC = 2.7 V; VCM = VCC / 2; TA = -40°C to 125°C | 6 |
| Input offset current | IIO | | 1 | 50 | pA | VCC = 2.7 V; VCM = VCC / 2; TA = 25°C | 6 |
| Input offset current | IIO | | | 2.5 | nA | VCC = 2.7 V; VCM = VCC / 2; TA = -40°C to 125°C | 6 |
| Common-mode rejection ratio | CMRR | 56 | 68 | | dB | VCC = 2.7 V; -0.2 V < VCM < 2.9 V | 6 |
| Voltage output swing from lower rail | VOL | | 230 | 260 | mV | VCC = 2.7 V; ISINK = 4 mA; TA = 25°C | 6 |
| Voltage output swing from lower rail | VOL | | | 325 | mV | VCC = 2.7 V; ISINK = 4 mA; TA = -40°C to 125°C | 6 |
| Voltage output swing from upper rail | VOH | | 210 | 250 | mV | VCC = 2.7 V; ISOURCE = 4 mA; TA = 25°C | 6 |
| Voltage output swing from upper rail | VOH | | | 350 | mV | VCC = 2.7 V; ISOURCE = 4 mA; TA = -40°C to 125°C | 6 |
| Short-circuit current, sinking (per comparator) | ISC | 13 | 19 | | mA | VCC = 2.7 V; per comparator; sinking | 6 |
| Short-circuit current, sourcing (per comparator) | ISC | 15 | 21 | | mA | VCC = 2.7 V; per comparator; sourcing | 6 |
| Quiescent current | IQ | | 36 | 46 | µA | VCC = 2.7 V; TA = 25°C | 6 |
| Quiescent current | IQ | | | 60 | µA | VCC = 2.7 V; TA = -40°C to 125°C | 6 |
| Propagation delay time, low to high | tPD | | 47 | 50 | ns | VCC = 2.7 V; input overdrive = 20 mV; CL = 15 pF | 6 |
| Propagation delay time, low to high | tPD | | 42 | 50 | ns | VCC = 2.7 V; input overdrive = 100 mV; CL = 15 pF | 6 |
| Propagation delay time, low to high | tPD | | | 55 | ns | VCC = 2.7 V; TA = -40°C to 125°C | 6 |
| Propagation delay time, high to low | tPD | | 40 | 50 | ns | VCC = 2.7 V; input overdrive = 20 mV; CL = 15 pF | 6 |
| Propagation delay time, high to low | tPD | | 38 | 50 | ns | VCC = 2.7 V; input overdrive = 100 mV; CL = 15 pF | 6 |
| Propagation delay time, high to low | tPD | | | 55 | ns | VCC = 2.7 V; TA = -40°C to 125°C | 6 |
## CAD (KiCad official)
- Symbol: `TLV3201AIDBVT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tlv3201aidbvt-etched.step` / `tlv3201aidbvt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv3201aidbvt.step` / `tlv3201aidbvt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlv3201.pdf) (40 pp, sha256 `358c30340b482fc4`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlv3201aidbvt-datasheet.pdf)