component

TLV313IDBVR

Public Made by Adom

by adom

UMW Operational Amplifier, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmptlv313idbvr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tlv313idbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
package.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json tlv313idbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 21h ago
README.md tlv313idbvr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 16d ago
tlv313idbvr-etched.fit.json tlv313idbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
tlv313idbvr-etched.glb tlv313idbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
tlv313idbvr-etched.step tlv313idbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
tlv313idbvr.glb Publish 0.1.0 · Ray 1mo ago
tlv313idbvr.kicad_mod Publish 0.1.0 · Ray 1mo ago
tlv313idbvr.kicad_sym Publish 0.1.0 · Ray 1mo ago
tlv313idbvr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 5 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
tlv313idbvr.step Publish 0.1.0 · Ray 1mo ago

TLV313IDBVR

UMW · Operational Amplifier · SOT-23-5

TLV313IDBVR from UMW, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output. Rail-to-rail output stage, capable of driving capacitive loads up to 150 pF without phase reversal.
2 V- power_in Negative (lowest) power supply. Tie to GND for single-supply operation; total supply range V+ - V- = 1.8 V to 5.5 V.
3 +IN input Noninverting input. Rail-to-rail common-mode range (V- to V+); input bias current typically 1 pA, allowing use with megaohm source impedances.
4 -IN input Inverting input. Rail-to-rail common-mode range; input pins are diode-clamped to the supply rails and must be current-limited to 10 mA when swinging beyond the rails.
5 V+ power_in Positive (highest) power supply. Recommended operating range 1.8 V to 5.5 V (relative to V-); absolute maximum 7 V. Bypass with a 0.1-µF ceramic capacitor to V-.

Key specifications

Parameter Value
Manufacturer UMW
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • TLV313IDBVR
  • TLV313IDBVT
  • TLV313IDBVRIDCKR
  • TLV313IDBVRIDCKT
  • TLV313IDBVRIDR
  • TLV313IDBVRIDGK
  • TLV313IDBVRIDGKR
  • TLV313IDBVRIPW
  • TLV313IDBVRIPWR

CAD (KiCad official)

  • Symbol: TLV313IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tlv313idbvr-etched.step / tlv313idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv313idbvr.step / tlv313idbvr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tlv313idbvr.step 85 KB You want the bare part, or you mark your own boards.
tlv313idbvr-etched.step 1.8 MB You want the part with TLV313IDBVR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 451 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (16 pp, sha256 80381efcb6dbfd15, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF