component
TLV3011AMDBVREP
Public Made by Adomby adom
Texas Instruments Comparators, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV3011AMDBVREP
Texas Instruments · Comparators · SOT-23-6
TLV3011AMDBVREP from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Comparator output; open-drain on TLV3011-EP (this MPN) and push-pull on TLV3012-EP. |
| 2 | V- | power_in | Negative supply voltage pin; the TLV3011-EP absolute maximum supply voltage is 7 V. |
| 3 | IN+ | input | Non-inverting (positive) comparator input; the input common-mode range extends 200 mV beyond the supply rails. |
| 4 | IN- | input | Inverting (negative) comparator input; for TLV3011-EP the input voltage is limited to -0.5 V to (V+) + 0.5 V with a ±10 mA current limit. |
| 5 | REF | output | Integrated 1.242 V reference voltage output that can supply up to 0.5 mA (typical) and remains stable with capacitive loads up to 10 nF. |
| 6 | V+ | power_in | Positive supply voltage pin; the TLV3011-EP absolute maximum supply voltage is 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | 7 | V | 4 | ||||
| Signal input terminals voltage | -0.5 | V | 4 | ||||
| Signal input terminals current | -10 | 10 | mA | 4 | |||
| Operating temperature range | -55 | 125 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Supply voltage VS = (V+) – (V–) | VS | 1.8 | 5.5 | V | 5 | ||
| Input voltage range from (V–) | -0.2 | V | 5 | ||||
| Output voltage range from (V–) | -0.2 | V | 5 | ||||
| Ambient temperature | TA | -55 | 125 | °C | 5 | ||
| Input offset voltage | VOS | 0.5 | 15 | mV | VCM = 0 V, IO = 0 V | 6 | |
| Input offset voltage vs temperature | dVOS/dT | -12 | 12 | μV/°C | TA = –55°C to 125°C | 6 | |
| Power supply rejection ratio | PSRR | 100 | 1000 | μV/V | VS = 1.8 V to 5.5 V | 6 | |
| Input bias current | IS | -10 | 10 | pA | VCM = VS/2 | 6 | |
| Input offset current | IOS | -10 | 10 | pA | VCM = VS/2 | 6 | |
| Common-mode voltage range | VCM | -0.2 | V | 6 | |||
| Common-mode rejection ratio | CMRR | 60 | 74 | dB | VCM = –0.2 V to (V+) – 1.5 V | 6 | |
| Common-mode rejection ratio | CMRR | 54 | 62 | dB | VCM = –0.2 V to (V+) + 0.2 V | 6 | |
| Voltage output low from rail | VOL | 160 | 200 | mV | VS = 5 V | 6 | |
| Reference output voltage | VOUT | 1.208 | 1.242 | 1.276 | V | 6 | |
| Reference initial accuracy | VOUT | -1 | 1 | % | Initial accuracy | 6 | |
| Reference temperature drift | dVOUT/dT | 40 | 100 | ppm/°C | –55°C ≤ TA ≤ 125°C | 6 | |
| Load regulation, sourcing | dVOUT/dILOAD | 0.36 | 1 | mV/mA | Sourcing, 0 mA < ISOURCE ≤ 0.5 mA | 6 | |
| Line regulation | dVOUT/dVIN | 10 | 100 | μV/V | 1.8 V ≤ VIN ≤ 5.5 V | 6 | |
| Specified voltage | VS | 1.8 | 5.5 | V | 6 | ||
| Operating voltage range | 1.8 | 5.5 | V | 6 | |||
| Quiescent current | IQ | 2.8 | 5 | μA | VS = 5 V, VO = High | 6 | |
| Junction-to-ambient thermal resistance | RθJA | 191.9 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 123.9 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 38.7 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 21.2 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 38.2 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TLV3011AMDBVREP - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tlv3011amdbvrep-etched.step/tlv3011amdbvrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv3011amdbvrep.step/tlv3011amdbvrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
ef83ce63c88f80f1, retrieved 2026-10-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).