main
Ray
Publish 0.1.0
400ad2a
TLV271QDRQ1
Texas Instruments · Operational Amplifier · SOIC-8
TLV271QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; leave this pin unconnected. |
| 2 | IN− | input | Inverting input of the amplifier; the input common-mode range is 0 V to VDD − 1.35 V, and the input voltage range is −0.2 V to VDD + 0.2 V (absolute maximum). |
| 3 | IN+ | input | Non-inverting input of the amplifier; the input common-mode range is 0 V to VDD − 1.35 V, and the input voltage range is −0.2 V to VDD + 0.2 V (absolute maximum). |
| 4 | GND | power_in | Ground reference for the device; all voltage values except differential voltages are referenced to GND. |
| 5 | NC | unconnected | No internal connection; leave this pin unconnected. |
| 6 | OUT | output | Amplifier output with rail-to-rail swing; output current range is ±100 mA (absolute maximum). |
| 7 | VDD | power_in | Positive supply; 2.7 V to 16 V single supply (±1.35 V to ±8 V split), 16.5 V absolute maximum. |
| 8 | NC | unconnected | No internal connection; leave this pin unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 16.5 | V | see Note 1 | 4 | ||
| Input voltage range | VI | -0.2 | V | see Note 1; upper limit VDD + 0.2 V | 4 | ||
| Input current range | II | -10 | 10 | mA | 4 | ||
| Output current range | IO | -100 | 100 | mA | 4 | ||
| Operating free-air temperature range | TA | -40 | 125 | °C | 4 | ||
| Maximum junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage, single supply | VDD | 2.7 | 16 | V | Single supply | 4 | |
| Supply voltage, split supply | VDD | 1.35 | 8 | V | Split supply; printed as ±1.35 V to ±8 V | 4 | |
| Common-mode input voltage range | VICR | 0 | V | upper limit VDD − 1.35 V | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | Q-suffix | 4 | |
| Input offset voltage | VIO | 0.5 | 5 | mV | 25°C; VIC = VDD/2, VO = VDD/2, RS = 50 Ω, RL = 10 kΩ | 5 | |
| Input offset voltage | VIO | 7 | mV | Full range; VIC = VDD/2, VO = VDD/2, RS = 50 Ω, RL = 10 kΩ | 5 | ||
| Input offset current | IIO | 1 | 60 | pA | 25°C | 5 | |
| Input offset current | IIO | 1000 | pA | VDD = 15 V, VIC = VDD/2, 125°C | 5 | ||
| Input bias current | IIB | 1 | 60 | pA | VDD = 15 V, VIC = VDD/2, VO = VDD/2, RS = 50 Ω, 25°C | 5 | |
| Input bias current | IIB | 1000 | pA | VDD = 15 V, VIC = VDD/2, VO = VDD/2, RS = 50 Ω, 125°C | 5 | ||
| Common-mode rejection ratio | CMRR | 53 | 70 | dB | VDD = 2.7 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω, 25°C | 5 | |
| Common-mode rejection ratio | CMRR | 54 | dB | Full range; VDD = 2.7 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω | 5 | ||
| Common-mode rejection ratio | CMRR | 58 | 80 | dB | VDD = 5 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω, 25°C | 5 | |
| Common-mode rejection ratio | CMRR | 57 | dB | Full range; VDD = 5 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω | 5 | ||
| Common-mode rejection ratio | CMRR | 67 | 85 | dB | VDD = 15 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω, 25°C | 5 | |
| Common-mode rejection ratio | CMRR | 66 | dB | Full range; VDD = 15 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω | 5 | ||
| Supply voltage rejection ratio | PSRR | 70 | 80 | dB | VDD = 2.7 V to 15 V, VIC = VDD/2, 25°C | 7 | |
| Supply voltage rejection ratio | PSRR | 65 | dB | Full range; VDD = 2.7 V to 15 V, No load, VIC = VDD/2 | 7 | ||
| Large-signal differential voltage amplification | AVD | 95 | 106 | dB | VO(PP) = VDD/2, RL = 10 kΩ, VDD = 2.7 V, 25°C | 5 | |
| Large-signal differential voltage amplification | AVD | 80 | 110 | dB | VO(PP) = VDD/2, RL = 10 kΩ, VDD = 5 V, 25°C | 5 | |
| Large-signal differential voltage amplification | AVD | 77 | 115 | dB | VO(PP) = VDD/2, RL = 10 kΩ, VDD = 15 V, 25°C | 5 | |
| High-level output voltage | VOH | 2.55 | 2.58 | V | VIC = VDD/2, IOH = −1 mA, VDD = 2.7 V, 25°C | 6 | |
| High-level output voltage | VOH | 2.48 | V | Full range; VIC = VDD/2, IOH = −1 mA, VDD = 2.7 V | 6 | ||
| High-level output voltage | VOH | 4.9 | 4.93 | V | VIC = VDD/2, IOH = −1 mA, VDD = 5 V, 25°C | 6 | |
| High-level output voltage | VOH | 4.85 | V | Full range; VIC = VDD/2, IOH = −1 mA, VDD = 5 V | 6 | ||
| High-level output voltage | VOH | 14.92 | 14.96 | V | VIC = VDD/2, IOH = −1 mA, VDD = 15 V, 25°C | 6 | |
| High-level output voltage | VOH | 14.9 | V | Full range; VIC = VDD/2, IOH = −1 mA, VDD = 15 V | 6 | ||
| High-level output voltage | VOH | 1.88 | 2.1 | V | VIC = VDD/2, IOH = −5 mA, VDD = 2.7 V, 25°C | 6 | |
| High-level output voltage | VOH | 4.58 | 4.68 | V | VIC = VDD/2, IOH = −5 mA, VDD = 5 V, 25°C | 6 | |
| High-level output voltage | VOH | 14.7 | 14.8 | V | VIC = VDD/2, IOH = −5 mA, VDD = 15 V, 25°C | 6 | |
| Low-level output voltage | VOL | 0.1 | 0.15 | V | VIC = VDD/2, IOL = 1 mA, VDD = 2.7 V, 25°C | 6 | |
| Low-level output voltage | VOL | 0.22 | V | Full range; VIC = VDD/2, IOL = 1 mA, VDD = 2.7 V | 6 | ||
| Low-level output voltage | VOL | 0.05 | 0.1 | V | VIC = VDD/2, IOL = 1 mA, VDD = 5 V, 25°C | 6 | |
| Low-level output voltage | VOL | 0.15 | V | Full range; VIC = VDD/2, IOL = 1 mA, VDD = 5 V | 6 | ||
| Low-level output voltage | VOL | 0.05 | 0.08 | V | VIC = VDD/2, IOL = 1 mA, VDD = 15 V, 25°C | 6 | |
| Low-level output voltage | VOL | 0.1 | V | Full range; VIC = VDD/2, IOL = 1 mA, VDD = 15 V | 6 | ||
| Low-level output voltage | VOL | 0.5 | 0.7 | V | VIC = VDD/2, IOL = 5 mA, VDD = 2.7 V, 25°C | 6 | |
| Low-level output voltage | VOL | 0.28 | 0.4 | V | VIC = VDD/2, IOL = 5 mA, VDD = 5 V, 25°C | 6 | |
| Low-level output voltage | VOL | 0.19 | 0.3 | V | VIC = VDD/2, IOL = 5 mA, VDD = 15 V, 25°C | 6 | |
| Positive rail output current | IO | 4 | mA | VO = 0.5 V from rail, VDD = 2.7 V, positive rail, 25°C | 6 | ||
| Negative rail output current | IO | 5 | mA | VO = 0.5 V from rail, VDD = 2.7 V, negative rail, 25°C | 6 | ||
| Positive rail output current | IO | 7 | mA | VO = 0.5 V from rail, VDD = 5 V, positive rail, 25°C | 6 | ||
| Negative rail output current | IO | 8 | mA | VO = 0.5 V from rail, VDD = 5 V, negative rail, 25°C | 6 | ||
| Positive rail output current | IO | 13 | mA | VO = 0.5 V from rail, VDD = 15 V, positive rail, 25°C | 6 | ||
| Negative rail output current | IO | 12 | mA | VO = 0.5 V from rail, VDD = 15 V, negative rail, 25°C | 6 | ||
| Supply current (per channel) | IDD | 470 | 560 | µA | VO = VDD/2, VDD = 2.7 V, 25°C | 7 | |
| Supply current (per channel) | IDD | 550 | 660 | µA | VO = VDD/2, VDD = 5 V, 25°C | 7 | |
| Supply current (per channel) | IDD | 750 | 900 | µA | VO = VDD/2, VDD = 15 V, 25°C | 7 | |
| Supply current (per channel) | IDD | 1200 | µA | VO = VDD/2, VDD = 15 V, Full range | 7 | ||
| Slew rate at unity gain | SR | 1.4 | 2.1 | V/µs | VO(PP) = VDD/2, VDD = 2.7 V, 25°C | 7 | |
| Slew rate at unity gain | SR | 1.4 | 2.4 | V/µs | VO(PP) = VDD/2, CL = 50 pF, RL = 10 kΩ, VDD = 5 V, 25°C | 7 | |
| Slew rate at unity gain | SR | 1.9 | 2.1 | V/µs | VO(PP) = VDD/2, VDD = 15 V, 25°C | 7 | |
| Junction-to-ambient thermal resistance | θJA | 176 | °C/W | D (8) package | 4 |
CAD (KiCad official)
- Symbol:
TLV271QDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tlv271qdrq1-etched.step/tlv271qdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv271qdrq1.step/tlv271qdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
4e8bafa26b95f8c2, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLV271QDRQ1
**Texas Instruments** · Operational Amplifier · SOIC-8
TLV271QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; leave this pin unconnected. |
| 2 | IN− | input | Inverting input of the amplifier; the input common-mode range is 0 V to VDD − 1.35 V, and the input voltage range is −0.2 V to VDD + 0.2 V (absolute maximum). |
| 3 | IN+ | input | Non-inverting input of the amplifier; the input common-mode range is 0 V to VDD − 1.35 V, and the input voltage range is −0.2 V to VDD + 0.2 V (absolute maximum). |
| 4 | GND | power_in | Ground reference for the device; all voltage values except differential voltages are referenced to GND. |
| 5 | NC | unconnected | No internal connection; leave this pin unconnected. |
| 6 | OUT | output | Amplifier output with rail-to-rail swing; output current range is ±100 mA (absolute maximum). |
| 7 | VDD | power_in | Positive supply; 2.7 V to 16 V single supply (±1.35 V to ±8 V split), 16.5 V absolute maximum. |
| 8 | NC | unconnected | No internal connection; leave this pin unconnected. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | | | 16.5 | V | see Note 1 | 4 |
| Input voltage range | VI | -0.2 | | | V | see Note 1; upper limit VDD + 0.2 V | 4 |
| Input current range | II | -10 | | 10 | mA | | 4 |
| Output current range | IO | -100 | | 100 | mA | | 4 |
| Operating free-air temperature range | TA | -40 | | 125 | °C | | 4 |
| Maximum junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage, single supply | VDD | 2.7 | | 16 | V | Single supply | 4 |
| Supply voltage, split supply | VDD | 1.35 | | 8 | V | Split supply; printed as ±1.35 V to ±8 V | 4 |
| Common-mode input voltage range | VICR | 0 | | | V | upper limit VDD − 1.35 V | 4 |
| Operating free-air temperature | TA | -40 | | 125 | °C | Q-suffix | 4 |
| Input offset voltage | VIO | | 0.5 | 5 | mV | 25°C; VIC = VDD/2, VO = VDD/2, RS = 50 Ω, RL = 10 kΩ | 5 |
| Input offset voltage | VIO | | | 7 | mV | Full range; VIC = VDD/2, VO = VDD/2, RS = 50 Ω, RL = 10 kΩ | 5 |
| Input offset current | IIO | | 1 | 60 | pA | 25°C | 5 |
| Input offset current | IIO | | | 1000 | pA | VDD = 15 V, VIC = VDD/2, 125°C | 5 |
| Input bias current | IIB | | 1 | 60 | pA | VDD = 15 V, VIC = VDD/2, VO = VDD/2, RS = 50 Ω, 25°C | 5 |
| Input bias current | IIB | | | 1000 | pA | VDD = 15 V, VIC = VDD/2, VO = VDD/2, RS = 50 Ω, 125°C | 5 |
| Common-mode rejection ratio | CMRR | 53 | 70 | | dB | VDD = 2.7 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω, 25°C | 5 |
| Common-mode rejection ratio | CMRR | 54 | | | dB | Full range; VDD = 2.7 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω | 5 |
| Common-mode rejection ratio | CMRR | 58 | 80 | | dB | VDD = 5 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω, 25°C | 5 |
| Common-mode rejection ratio | CMRR | 57 | | | dB | Full range; VDD = 5 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω | 5 |
| Common-mode rejection ratio | CMRR | 67 | 85 | | dB | VDD = 15 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω, 25°C | 5 |
| Common-mode rejection ratio | CMRR | 66 | | | dB | Full range; VDD = 15 V, VIC = 0 to VDD−1.35 V, RS = 50 Ω | 5 |
| Supply voltage rejection ratio | PSRR | 70 | 80 | | dB | VDD = 2.7 V to 15 V, VIC = VDD/2, 25°C | 7 |
| Supply voltage rejection ratio | PSRR | 65 | | | dB | Full range; VDD = 2.7 V to 15 V, No load, VIC = VDD/2 | 7 |
| Large-signal differential voltage amplification | AVD | 95 | 106 | | dB | VO(PP) = VDD/2, RL = 10 kΩ, VDD = 2.7 V, 25°C | 5 |
| Large-signal differential voltage amplification | AVD | 80 | 110 | | dB | VO(PP) = VDD/2, RL = 10 kΩ, VDD = 5 V, 25°C | 5 |
| Large-signal differential voltage amplification | AVD | 77 | 115 | | dB | VO(PP) = VDD/2, RL = 10 kΩ, VDD = 15 V, 25°C | 5 |
| High-level output voltage | VOH | 2.55 | 2.58 | | V | VIC = VDD/2, IOH = −1 mA, VDD = 2.7 V, 25°C | 6 |
| High-level output voltage | VOH | 2.48 | | | V | Full range; VIC = VDD/2, IOH = −1 mA, VDD = 2.7 V | 6 |
| High-level output voltage | VOH | 4.9 | 4.93 | | V | VIC = VDD/2, IOH = −1 mA, VDD = 5 V, 25°C | 6 |
| High-level output voltage | VOH | 4.85 | | | V | Full range; VIC = VDD/2, IOH = −1 mA, VDD = 5 V | 6 |
| High-level output voltage | VOH | 14.92 | 14.96 | | V | VIC = VDD/2, IOH = −1 mA, VDD = 15 V, 25°C | 6 |
| High-level output voltage | VOH | 14.9 | | | V | Full range; VIC = VDD/2, IOH = −1 mA, VDD = 15 V | 6 |
| High-level output voltage | VOH | 1.88 | 2.1 | | V | VIC = VDD/2, IOH = −5 mA, VDD = 2.7 V, 25°C | 6 |
| High-level output voltage | VOH | 4.58 | 4.68 | | V | VIC = VDD/2, IOH = −5 mA, VDD = 5 V, 25°C | 6 |
| High-level output voltage | VOH | 14.7 | 14.8 | | V | VIC = VDD/2, IOH = −5 mA, VDD = 15 V, 25°C | 6 |
| Low-level output voltage | VOL | | 0.1 | 0.15 | V | VIC = VDD/2, IOL = 1 mA, VDD = 2.7 V, 25°C | 6 |
| Low-level output voltage | VOL | | | 0.22 | V | Full range; VIC = VDD/2, IOL = 1 mA, VDD = 2.7 V | 6 |
| Low-level output voltage | VOL | | 0.05 | 0.1 | V | VIC = VDD/2, IOL = 1 mA, VDD = 5 V, 25°C | 6 |
| Low-level output voltage | VOL | | | 0.15 | V | Full range; VIC = VDD/2, IOL = 1 mA, VDD = 5 V | 6 |
| Low-level output voltage | VOL | | 0.05 | 0.08 | V | VIC = VDD/2, IOL = 1 mA, VDD = 15 V, 25°C | 6 |
| Low-level output voltage | VOL | | | 0.1 | V | Full range; VIC = VDD/2, IOL = 1 mA, VDD = 15 V | 6 |
| Low-level output voltage | VOL | | 0.5 | 0.7 | V | VIC = VDD/2, IOL = 5 mA, VDD = 2.7 V, 25°C | 6 |
| Low-level output voltage | VOL | | 0.28 | 0.4 | V | VIC = VDD/2, IOL = 5 mA, VDD = 5 V, 25°C | 6 |
| Low-level output voltage | VOL | | 0.19 | 0.3 | V | VIC = VDD/2, IOL = 5 mA, VDD = 15 V, 25°C | 6 |
| Positive rail output current | IO | 4 | | | mA | VO = 0.5 V from rail, VDD = 2.7 V, positive rail, 25°C | 6 |
| Negative rail output current | IO | 5 | | | mA | VO = 0.5 V from rail, VDD = 2.7 V, negative rail, 25°C | 6 |
| Positive rail output current | IO | 7 | | | mA | VO = 0.5 V from rail, VDD = 5 V, positive rail, 25°C | 6 |
| Negative rail output current | IO | 8 | | | mA | VO = 0.5 V from rail, VDD = 5 V, negative rail, 25°C | 6 |
| Positive rail output current | IO | 13 | | | mA | VO = 0.5 V from rail, VDD = 15 V, positive rail, 25°C | 6 |
| Negative rail output current | IO | 12 | | | mA | VO = 0.5 V from rail, VDD = 15 V, negative rail, 25°C | 6 |
| Supply current (per channel) | IDD | | 470 | 560 | µA | VO = VDD/2, VDD = 2.7 V, 25°C | 7 |
| Supply current (per channel) | IDD | | 550 | 660 | µA | VO = VDD/2, VDD = 5 V, 25°C | 7 |
| Supply current (per channel) | IDD | | 750 | 900 | µA | VO = VDD/2, VDD = 15 V, 25°C | 7 |
| Supply current (per channel) | IDD | | | 1200 | µA | VO = VDD/2, VDD = 15 V, Full range | 7 |
| Slew rate at unity gain | SR | 1.4 | 2.1 | | V/µs | VO(PP) = VDD/2, VDD = 2.7 V, 25°C | 7 |
| Slew rate at unity gain | SR | 1.4 | 2.4 | | V/µs | VO(PP) = VDD/2, CL = 50 pF, RL = 10 kΩ, VDD = 5 V, 25°C | 7 |
| Slew rate at unity gain | SR | 1.9 | 2.1 | | V/µs | VO(PP) = VDD/2, VDD = 15 V, 25°C | 7 |
| Junction-to-ambient thermal resistance | θJA | | 176 | | °C/W | D (8) package | 4 |
## CAD (KiCad official)
- Symbol: `TLV271QDRQ1`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `tlv271qdrq1-etched.step` / `tlv271qdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv271qdrq1.step` / `tlv271qdrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlv271-q1.pdf) (33 pp, sha256 `4e8bafa26b95f8c2`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlv271qdrq1-datasheet.pdf)