Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV2460IDBVR

Texas Instruments · Operational Amplifier · SOT-23-6

TLV2460IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, which swings rail-to-rail and is placed in a high-impedance state when the device is shut down; a 20 Ω series RNULL is recommended for capacitive loads above 10 pF.
2 GND power_in Device ground, which is the reference for all voltages on the device (except differential input voltage) and for the shutdown threshold.
3 IN+ input Noninverting input, whose common-mode input voltage range extends from 0 V to VDD, with a maximum input current of ±200 mA.
4 IN− input Inverting input, whose common-mode input voltage range extends from 0 V to VDD, with a maximum input current of ±200 mA.
5 SHDN input Shutdown control: when tied low (below 0.7 V, referenced to GND/VDD÷2 threshold) the amplifier is disabled and supply current drops to 0.3 µA per channel; leave floating or pull high (at least 2 V) to enable the amplifier.
6 VDD+ power_in Positive supply, specified at 2.7 V to 6 V single supply or ±1.35 V to ±3 V split supply, with absolute maximum of 6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 6 V Voltages referenced to GND (Note 1) 6
Differential input voltage VID -0.2 V Printed upper limit VDD + 0.2 V 6
Input current (any input) II -200 200 mA 6
Output current IO -175 175 mA 6
Maximum junction temperature TJ 150 °C 6
Storage temperature range Tstg -65 150 °C 6
Operating free-air temperature, I and Q suffix TA -40 125 °C I and Q suffix 6
Junction-to-ambient thermal resistance θJA 294.3 °C/W DBV (6) package; not production tested 6
Junction-to-case thermal resistance θJC 55 °C/W DBV (6) package; not production tested 6
Single supply voltage VDD 2.7 6 V Single supply 7
Split supply voltage (magnitude) VDD 1.35 3 V Split supply, printed ±1.35 V to ±3 V 7
Common-mode input voltage range VICR 0 V Printed upper limit VDD 7
Operating free-air temperature, I and Q suffix TA -40 125 °C I-suffix and Q-suffix 7
Shutdown on voltage level VIH 2 V Relative to GND terminal 7
Shutdown off voltage level VIL 0.7 V Relative to GND terminal 7
Input offset voltage VIO 500 2000 µV 25°C; VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, RS = 50 Ω 7
Input offset voltage VIO 2200 µV Full range; VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, RS = 50 Ω 7
Input offset current IIO 2.8 7 nA 25°C; VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, RS = 50 Ω 7
Input offset current IIO 75 nA Full range; VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, RS = 50 Ω 7
Input bias current IIB 4.4 14 nA 25°C; VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, RS = 50 Ω 7
Input bias current IIB 75 nA Full range; VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, RS = 50 Ω 7
High-level output voltage VOH 2.8 V Full range; IOH = −2.5 mA; VDD = 3 V 7
High-level output voltage VOH 2.5 V Full range; IOH = −10 mA; VDD = 3 V 7
Low-level output voltage VOL 0.2 V Full range; VIC = 1.5 V, IOL = 2.5 mA; VDD = 3 V 7
Low-level output voltage VOL 0.5 V Full range; VIC = 1.5 V, IOL = 10 mA; VDD = 3 V 7
Short-circuit output current, sourcing IOS 20 mA Full range; VDD = 3 V 7
Short-circuit output current, sinking IOS 20 mA Full range; VDD = 3 V 7
Output current IO -40 40 mA 25°C; measured 1 V from rail; VDD = 3 V 7
Large-signal differential voltage amplification AVD 90 105 dB 25°C; RL = 10 kΩ, VO(PP) = 1 V; VDD = 3 V 7
Large-signal differential voltage amplification AVD 89 dB Full range; RL = 10 kΩ, VO(PP) = 1 V; VDD = 3 V 7
Common-mode rejection ratio CMRR 66 80 dB 25°C; VICR = 0 to 3 V, RS = 50 Ω 8
Common-mode rejection ratio CMRR 60 dB Full range; VICR = 0 to 3 V, RS = 50 Ω 8
Supply voltage rejection ratio kSVR 80 85 dB 25°C; VDD = 2.7 V to 6 V, VIC = VDD/2, no load 8
Supply voltage rejection ratio kSVR 75 dB Full range; VDD = 2.7 V to 6 V, VIC = VDD/2, no load 8
Supply voltage rejection ratio (ΔVDD/ΔVIO) kSVR 85 95 dB 25°C; VDD = 3 V to 5 V, VIC = VDD/2, no load 8
Supply voltage rejection ratio (ΔVDD/ΔVIO) kSVR 80 dB Full range; VDD = 3 V to 5 V, VIC = VDD/2, no load 8
Supply current per channel IDD 0.5 0.575 mA 25°C; VO = 1.5 V, no load; VDD = 3 V 8
Supply current per channel IDD 0.9 mA Full range; VO = 1.5 V, no load; VDD = 3 V 8
Supply current in shutdown, per channel IDD(SHDN) 2.5 µA Full range; SHDN < 0.7 V, per channel in shutdown; VDD = 3 V 8
Slew rate at unity gain SR 0.9 1.6 V/µs 25°C; VO(PP) = 0.8 V, CL = 160 pF, RL = 10 kΩ; VDD = 3 V 8
Slew rate at unity gain SR 0.8 V/µs Full range; VO(PP) = 0.8 V, CL = 160 pF, RL = 10 kΩ; VDD = 3 V 8
Input offset voltage VIO 500 2000 µV 25°C; VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, RS = 50 Ω 9
Input offset voltage VIO 2200 µV Full range; VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, RS = 50 Ω 9
Input offset current IIO 0.3 7 nA 25°C; VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, RS = 50 Ω 9
Input offset current IIO 60 nA Full range; VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, RS = 50 Ω 9
Input bias current IIB 1.3 14 nA 25°C; VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, RS = 50 Ω 9
Input bias current IIB 60 nA Full range; VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, RS = 50 Ω 9
High-level output voltage VOH 4.8 V Full range; IOH = −2.5 mA; VDD = 5 V 9
High-level output voltage VOH 4.7 V Full range; IOH = −10 mA; VDD = 5 V 9
Low-level output voltage VOL 0.2 V Full range; VIC = 2.5 V, IOL = 2.5 mA; VDD = 5 V 9
Low-level output voltage VOL 0.3 V Full range; VIC = 2.5 V, IOL = 10 mA; VDD = 5 V 9
Short-circuit output current, sourcing IOS 60 mA Full range; VDD = 5 V 9
Short-circuit output current, sinking IOS 60 mA Full range; VDD = 5 V 9
Output current IO -80 80 mA 25°C; measured at 1 V from rail; VDD = 5 V 9
Large-signal differential voltage amplification AVD 92 109 dB 25°C; VIC = 2.5 V, RL = 10 kΩ; VDD = 5 V 9
Large-signal differential voltage amplification AVD 90 dB Full range; VIC = 2.5 V, VO = 1 V to 4 V, RL = 10 kΩ; VDD = 5 V 9
Slew rate at unity gain SR 0.9 1.6 V/µs 25°C; VO(PP) = 2 V, CL = 160 pF, RL = 10 kΩ; VDD = 5 V 10
Slew rate at unity gain SR 0.8 V/µs Full range; VO(PP) = 2 V, CL = 160 pF, RL = 10 kΩ; VDD = 5 V 10
Supply current per channel IDD 0.55 0.65 mA 25°C; VO = 2.5 V, no load; VDD = 5 V 9
Supply current per channel IDD 1 mA Full range; VO = 2.5 V, no load; VDD = 5 V 9

CAD (KiCad official)

  • Symbol: TLV2460IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv2460idbvr-etched.step / tlv2460idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv2460idbvr.step / tlv2460idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (84 pp, sha256 c6d8801e35b301ec, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF