3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV2381IDBVR
Texas Instruments · Operational Amplifier · SOT-23-5
TLV2381IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, capable of swinging rail-to-rail into a load, with output current limited per the absolute maximum rating of 100 mA. |
| 2 | GND | power_in | Ground/negative supply reference pin; input voltages are specified relative to this GND pin. |
| 3 | IN+ | input | Non-inverting input with rail-to-rail common-mode input voltage range of -0.2 V to VS+0.2 V. |
| 4 | IN- | input | Inverting input with rail-to-rail common-mode input voltage range of -0.2 V to VS+0.2 V. |
| 5 | VDD | power_in | Positive supply pin, operable from 2.7 V to 16 V single supply (or ±1.35 V to ±8 V dual supply), with an absolute maximum of 16.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 16.5 | V | 2 | |||
| Output current | IO | 100 | mA | 2 | |||
| Maximum junction temperature | TJ | 150 | °C | 2 | |||
| Storage temperature range | Tstg | -65 | 125 | °C | 2 | ||
| Lead temperature | 300 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 2 | |||
| Supply voltage, dual supply | VS | 1.35 | 8 | V | Dual supply, printed as ±1.35 V to ±8 V | 3 | |
| Supply voltage, single supply | VS | 2.7 | 16 | V | Single supply | 3 | |
| Input common-mode voltage range | -0.2 | V | Upper limit printed as VS + 0.2 V (not numeric) | 3 | |||
| Operating free-air temperature, I suffix | TA | -40 | 125 | °C | I-suffix | 3 | |
| Input offset voltage | VIO | 0.5 | 4.5 | mV | VIC = VS/2, VO = VS/2, 25°C | 3 | |
| Input offset voltage | VIO | 6.5 | mV | VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, full range | 3 | ||
| Common-mode rejection ratio | CMRR | 54 | 69 | dB | VIC = 0 V to VS, VS = 2.7 V, 25°C | 3 | |
| Common-mode rejection ratio | CMRR | 53 | dB | VIC = 0 V to VS, RS = 50 Ω, VS = 2.7 V, full range | 3 | ||
| Common-mode rejection ratio | CMRR | 71 | 86 | dB | VIC = 0 V to VS–1.3 V, VS = 2.7 V, 25°C | 3 | |
| Common-mode rejection ratio | CMRR | 70 | dB | VIC = 0 V to VS–1.3 V, RS = 50 Ω, full range | 3 | ||
| Common-mode rejection ratio | CMRR | 58 | 74 | dB | VIC = 0 V to VS, VS = 5 V, 25°C | 3 | |
| Common-mode rejection ratio | CMRR | 57 | dB | VIC = 0 V to VS, RS = 50 Ω, VS = 5 V, full range | 3 | ||
| Common-mode rejection ratio | CMRR | 72 | 88 | dB | VIC = 0 V to VS–1.3 V, VS = 5 V, 25°C | 3 | |
| Common-mode rejection ratio | CMRR | 65 | 80 | dB | VIC = 0 V to VS, VS = 15 V, 25°C | 3 | |
| Common-mode rejection ratio | CMRR | 64 | dB | VIC = 0 V to VS, RS = 50 Ω, VS = 15 V, full range | 3 | ||
| Common-mode rejection ratio | CMRR | 72 | 90 | dB | VIC = 0 V to VS–1.3 V, VS = 15 V, 25°C | 3 | |
| Large-signal differential voltage amplification | AVD | 80 | 100 | dB | VO = VS/2, VS = 2.7 V, 25°C | 3 | |
| Large-signal differential voltage amplification | AVD | 77 | dB | VO = VS/2, VS = 2.7 V, full range | 3 | ||
| Large-signal differential voltage amplification | AVD | 77 | 83 | dB | VS = 15 V, 25°C | 3 | |
| Large-signal differential voltage amplification | AVD | 74 | dB | VS = 15 V, full range | 3 | ||
| Input offset current | IIO | 1 | 60 | pA | VIC = VS/2, VO = VS/2, TA ≤ 25°C | 3 | |
| Input offset current | IIO | 100 | pA | VIC = VS/2, VO = VS/2, TA ≤ 70°C | 3 | ||
| Input offset current | IIO | 1000 | pA | VIC = VS/2, VO = VS/2, TA ≤ 125°C | 3 | ||
| Input bias current | IIB | 1 | 60 | pA | VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, TA ≤ 25°C | 3 | |
| Input bias current | IIB | 200 | pA | VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, TA ≤ 70°C | 3 | ||
| Input bias current | IIB | 1000 | pA | VIC = VS/2, VO = VS/2, RL = 100 kΩ, RS = 50 Ω, TA ≤ 125°C | 3 | ||
| Supply current (per channel) | IDD | 7 | 10 | µA | VO = VS/2, 25°C | 4 | |
| Supply current (per channel) | IDD | 15 | µA | VO = VS/2, full range | 4 | ||
| Power supply rejection ratio (ΔVS/ΔVIO) | PSRR | 74 | 82 | dB | VS = 2.7 V to 16 V, no load, 25°C | 4 | |
| Power supply rejection ratio (ΔVS/ΔVIO) | PSRR | 70 | dB | VS = 2.7 V to 16 V, VIC = VS/2 V, no load, full range | 4 | ||
| Output voltage swing from rail | 160 | 200 | mV | VS = 2.7 V, 25°C | 4 | ||
| Output voltage swing from rail | 220 | mV | VS = 2.7 V, full range | 4 | |||
| Output voltage swing from rail | 85 | 120 | mV | VIC = VS/2, VS = 5 V, 25°C | 4 | ||
| Output voltage swing from rail | 200 | mV | VIC = VS/2, IO = 100 µA, VS = 5 V, full range | 4 | |||
| Output voltage swing from rail | VO | 50 | 120 | mV | VS = 15 V, 25°C | 4 | |
| Output voltage swing from rail | VO | 150 | mV | VS = 15 V, full range | 4 | ||
| Output voltage swing from rail | 420 | 800 | mV | VS = 5 V, VIC = VS/2, 25°C | 4 | ||
| Output voltage swing from rail | 900 | mV | VIC = VS/2, VS = 5 V, full range | 4 | |||
| Output voltage swing from rail | 200 | 400 | mV | IO = 500 µA, VS = 15 V, 25°C | 4 | ||
| Output voltage swing from rail | 500 | mV | IO = 500 µA, VS = 15 V, full range | 4 | |||
| Output current | IO | 400 | µA | VO = 0.5 V from rail, VS = 2.7 V, 25°C | 4 | ||
| Junction-to-ambient thermal resistance, DBV (5) package | θJA | 324.1 | °C/W | Low-K test PCB, no air flow | 2 | ||
| Junction-to-case thermal resistance, DBV (5) package | θJC | 55 | °C/W | DBV (5) package | 2 |
CAD (KiCad official)
- Symbol:
TLV2381IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tlv2381idbvr-etched.step/tlv2381idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv2381idbvr.step/tlv2381idbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
a16105cf614e374d, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).