Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV2313IDGKR

Texas Instruments · Operational Amplifier · VSSOP-8

TLV2313IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT A output Output of channel A; the datasheet gives no separate load limit for this pin, and the absolute maximum output short-circuit condition is continuous for one amplifier per package.
2 -IN A input Inverting input of channel A; input signals that may swing more than 0.5 V beyond the supply rails must be current limited to 10 mA or less.
3 +IN A input Noninverting input of channel A; input signals that may swing more than 0.5 V beyond the supply rails must be current limited to 10 mA or less.
4 V- power_in Negative (lowest) power supply; the recommended supply range is 1.8 V to 5.5 V across V+ and V-.
5 +IN B input Noninverting input of channel B; input signals that may swing more than 0.5 V beyond the supply rails must be current limited to 10 mA or less.
6 -IN B input Inverting input of channel B; input signals that may swing more than 0.5 V beyond the supply rails must be current limited to 10 mA or less.
7 OUT B output Output of channel B; the datasheet gives no separate load limit for this pin, and the absolute maximum output short-circuit condition is continuous for one amplifier per package.
8 V+ power_in Positive (highest) power supply; the recommended supply voltage is 1.8 V to 5.5 V with an absolute maximum of 7 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS 0.75 3 mV Electrical Characteristics: 5.5 V 8
Power-supply rejection ratio PSRR 74 90 dB Electrical Characteristics: 5.5 V 8
Common-mode rejection ratio CMRR 64 80 dB Electrical Characteristics: 5.5 V; VCM = -0.2 V to 5.7 V 8
Input bias current IB -1 1 pA Electrical Characteristics: 5.5 V 8
Input offset current IOS -1 1 pA Electrical Characteristics: 5.5 V 8
Voltage output swing from supply rails VO 5 20 mV Electrical Characteristics: 5.5 V; RL = 100 kΩ 9
Voltage output swing from supply rails VO 75 100 mV Electrical Characteristics: 5.5 V; RL = 2 kΩ 9
Short-circuit current ISC -15 15 mA Electrical Characteristics: 5.5 V 9
Specified voltage range VS 1.8 5.5 V Electrical Characteristics: 5.5 V 9
Quiescent current per amplifier IQ 65 90 µA Electrical Characteristics: 5.5 V; TA = -40°C to 125°C, VS = 5.0 V, IO = 0 mA 9
Input offset voltage VOS 0.75 3 mV Electrical Characteristics: 1.8 V 10
Power-supply rejection ratio PSRR 74 90 dB Electrical Characteristics: 1.8 V 10
Input bias current IB -1 1 pA Electrical Characteristics: 1.8 V 10
Input offset current IOS -1 1 pA Electrical Characteristics: 1.8 V 10
Short-circuit current ISC -6 6 mA Electrical Characteristics: 1.8 V 11
Specified voltage range VS 1.8 5.5 V Electrical Characteristics: 1.8 V 11
Quiescent current per amplifier IQ 65 90 µA Electrical Characteristics: 1.8 V; TA = -40°C to 125°C, VS = 5.0 V, IO = 0 mA 11
Supply voltage 7 V 6
Signal input terminals current -10 10 mA 6
Operating temperature, free-air TA -40 150 °C 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Supply voltage VS 1.8 5.5 V 6
Specified temperature range TA -40 125 °C 6
Junction-to-ambient thermal resistance (DGK, VSSOP-8) RθJA 191.2 °C/W 7
Junction-to-case (top) thermal resistance (DGK, VSSOP-8) RθJC(top) 61.9 °C/W 7
Junction-to-board thermal resistance (DGK, VSSOP-8) RθJB 111.9 °C/W 7

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TLV2313IDGKR
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv2313idgkr-etched.step / tlv2313idgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv2313idgkr.step / tlv2313idgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 536186e2ec0be652, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF