3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV2221IDBVR
Texas Instruments · Operational Amplifier · SOT-23-5
TLV2221IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Non-inverting input; input voltage range -0.3V to VDD with 10pA typical input bias current. |
| 2 | VDD-/GND | power_in | Ground or negative power supply; connect to negative rail or ground reference. |
| 3 | IN- | input | Inverting input; input voltage range -0.3V to VDD with 10pA typical input bias current. |
| 4 | OUT | output | Output; provides rail-to-rail swing with ±50mA output current capability. |
| 5 | VDD+ | power_in | Positive power supply; operating range 2.7V to 10V for single or dual supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD | 12 | V | 4 | |||
| Input voltage range, any input (absolute maximum) | VI | -0.3 | V | 4 | |||
| Input current, each input | II | -5 | 5 | mA | 4 | ||
| Output current | IO | -50 | 50 | mA | 4 | ||
| Operating free-air temperature, TLV2221I | TA | -40 | 85 | °C | 自然通风条件下 | 4 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Continuous total power dissipation (DBV package) | 150 | mW | TA ≤ +25°C | 4 | |||
| Supply voltage (recommended operating) | VDD | 2.7 | 10 | V | 4 | ||
| Operating free-air temperature (recommended) | TA | -40 | 85 | °C | 自然通风工作温度范围 | 4 | |
| Input offset voltage, VDD=3V | VIO | 0.3 | 3 | mV | 完整范围; VDD± = ±1.5V,VIC = 0,VO = 0,RS = 50Ω | 5 | |
| Large-signal differential voltage gain RL=2kΩ, VDD=3V | AVD | 66 | 118 | dB | +25°C; VIC = 1.5V,VO = 1V 至 2V,RL = 2kΩ | 5 | |
| Large-signal differential voltage gain RL=2kΩ, VDD=3V, full range | AVD | 60 | dB | 完整范围; VIC = 1.5V,VO = 1V 至 2V,RL = 2kΩ | 5 | ||
| Common-mode rejection ratio, VDD=3V | CMRR | 70 | 90 | dB | +25°C; VIC = 0V 至 1.7V,VO = 1.5V,RS = 50Ω | 5 | |
| Common-mode rejection ratio, VDD=3V, full range | CMRR | 65 | dB | 完整范围; VIC = 0V 至 1.7V,VO = 1.5V,RS = 50Ω | 5 | ||
| Supply voltage rejection ratio (ΔVDD/ΔVIO), VDD=3V | kSVR | 80 | 95 | dB | +25°C; VDD = 2.7V 至 8V,VIC = VDD/2,无负载 | 5 | |
| Supply voltage rejection ratio (ΔVDD/ΔVIO), VDD=3V, full range | kSVR | 80 | dB | 完整范围; VDD = 2.7V 至 8V,VIC = VDD/2,无负载 | 5 | ||
| Supply current, VDD=3V | IDD | 130 | 150 | µA | +25°C; VO = 1.5V,空载 | 5 | |
| Supply current, VDD=3V, full range | IDD | 200 | µA | 完整范围; VO = 1.5V,空载 | 5 | ||
| Input offset voltage, VDD=5V | VIO | 0.3 | 3 | mV | 完整范围; VDD± = ±2.5V,VIC = 0,VO = 0,RS = 50Ω | 7 | |
| High-level output voltage, VDD=5V, IOH=-500µA | VOH | 4.75 | 4.88 | V | +25°C; IOH = -500µA | 7 | |
| High-level output voltage, VDD=5V, IOH=-1mA | VOH | 4.5 | 4.76 | V | +25°C; IOH = -1mA | 7 | |
| Large-signal differential voltage gain RL=2kΩ, VDD=5V | AVD | 69.5 | 130 | dB | +25°C; VIC = 2.5V,VO = 1V 至 4V,RL = 2kΩ | 7 | |
| Large-signal differential voltage gain RL=2kΩ, VDD=5V, full range | AVD | 60 | dB | 完整范围; VIC = 2.5V,VO = 1V 至 4V,RL = 2kΩ | 7 | ||
| Common-mode rejection ratio, VDD=5V | CMRR | 70 | 90 | dB | +25°C; VIC = 0V 至 2.7V,VO = 1.5V,RS = 50Ω | 7 | |
| Common-mode rejection ratio, VDD=5V, full range | CMRR | 65 | dB | 完整范围; VIC = 0V 至 2.7V,VO = 1.5V,RS = 50Ω | 7 | ||
| Supply voltage rejection ratio (ΔVDD/ΔVIO), VDD=5V | kSVR | 80 | 95 | dB | +25°C; VDD = 4.4V 至 8V,VIC = VDD/2,无负载 | 7 | |
| Supply voltage rejection ratio (ΔVDD/ΔVIO), VDD=5V, full range | kSVR | 80 | dB | 完整范围; VDD = 4.4V 至 8V,VIC = VDD/2,无负载 | 7 | ||
| Supply current, VDD=5V | IDD | 130 | 150 | µA | +25°C; VO = 2.5V,空载 | 7 | |
| Supply current, VDD=5V, full range | IDD | 200 | µA | 完整范围; VO = 2.5V,空载 | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 192.1 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 113.6 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 60.5 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 37.2 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 60.3 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TLV2221IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tlv2221idbvr-etched.step/tlv2221idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv2221idbvr.step/tlv2221idbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
fbd52cde8af0f9eb, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).