main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlv1872dgsr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tlv1872dgsr-etched.glb tlv1872dgsr: factory component page (tier=mfr) · Ray
tlv1872dgsr-etched.step tlv1872dgsr: factory component page (tier=mfr) · Ray
tlv1872dgsr-hero.glb tlv1872dgsr: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv1872dgsr-hero.overlay.json tlv1872dgsr: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv1872dgsr.glb Publish 0.1.0 · Ray
tlv1872dgsr.kicad_mod Publish 0.1.0 · Ray
tlv1872dgsr.kicad_sym Publish 0.1.0 · Ray
tlv1872dgsr.lbr Publish 0.1.0 · Ray
tlv1872dgsr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 10 pins · Ray

TLV1872DGSR

Texas Instruments · Comparators · VSSOP-10

TLV1872DGSR from Texas Instruments, in a VSSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 VEEO power_in Output negative supply voltage; absolute maximum is VEEI to VEEI + 20V.
2 OUT1 output Output pin of comparator 1, push-pull and diode-clamped to VEEO and VCCO, with output current internally limited to <35mA.
3 IN1- input Inverting input of comparator 1, rail-to-rail, with an absolute maximum range of VEEI - 0.3V to VCCI + 0.3V.
4 IN1+ input Non-inverting input of comparator 1, rail-to-rail, with an absolute maximum range of VEEI - 0.3V to VCCI + 0.3V.
5 VEEI power_in Input negative supply voltage; the total input supply (VCCI - VEEI) is 2.7V to 40V.
6 IN2+ input Non-inverting input of comparator 2, rail-to-rail, with an absolute maximum range of VEEI - 0.3V to VCCI + 0.3V.
7 IN2- input Inverting input of comparator 2, rail-to-rail, with an absolute maximum range of VEEI - 0.3V to VCCI + 0.3V.
8 OUT2 output Output pin of comparator 2, push-pull and diode-clamped to VEEO and VCCO, with output current internally limited to <35mA.
9 VCCI power_in Input positive supply voltage; the total input supply (VCCI - VEEI) is 2.7V to 40V, with an absolute maximum of 42V.
10 VCCO power_in Output positive supply voltage; absolute maximum is VEEO - 0.3V to VCCI + 0.3V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-10
Category Amplifiers/Comparators
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VCCI, VEEI -0.3 42 V 5
Current into input pins -10 10 mA IN+, IN- 5
Output short circuit current -10 10 mA 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
ESD HBM V(ESD) -2000 2000 V Human-body model per ANSI/ESDA/JEDEC JS-001 5
ESD CDM V(ESD) -1000 1000 V Charged-device model per JESD22-C101 5
Input supply voltage VCCI, VEEI 2.7 40 V 6
Ambient temperature TA -40 125 °C 6
Input offset voltage VOS -2.5 0.3 2.5 mV TA = 25°C 7
Input offset voltage VOS -3 3 mV TA = -40°C to +125°C 7
Quiescent current per comparator, output high IQ 75 100 µA No Load, Output High, TA = 25°C 7
Quiescent current per comparator, output high IQ 105 µA No Load, Output High, TA = -40°C to +125°C 7
Quiescent current per comparator, output low IQ 100 135 µA No Load, Output Low, TA = 25°C 7
Quiescent current per comparator, output low IQ 140 µA No Load, Output Low, TA = -40°C to +125°C 7
Input bias current IB -5 5 nA TA = -40°C to +125°C 7
Input bias current IB 500 pA 7
Output voltage swing from VEEO VOL 300 mV ISINK = 4mA, TA = -40°C to +125°C 7
Output voltage swing from VCCO VOH 300 mV ISOURCE = 4mA, TA = -40°C to +125°C 7
Propagation delay high-to-low TPD-HL 110 ns VOD = 10mV, VUD = 100mV 8
Propagation delay low-to-high TPD-LH 110 ns VOD = 10mV, VUD = 100mV 8
Power on-time PON 80 µs 8
Input offset voltage drift dVIO/dT 1.2 µV/°C TA = -40°C to +125°C 7
Power-on-reset threshold VPOR 1.9 V 7
Input offset current IOS 10 pA 7
Input capacitance, differential CID 5 pF 7
Input capacitance, common mode CIC 5 pF 7
Short-circuit current, sinking IOL 30 mA Sinking, TA = -40°C to +125°C 7
Short-circuit current, sourcing IOH 30 mA Sourcing, TA = -40°C to +125°C 7
Propagation delay high-to-low TPD-HL 65 ns VOD = 100mV, VUD = 100mV 8
Propagation delay low-to-high TPD-LH 65 ns VOD = 100mV, VUD = 100mV 8
Output rise time, 20% to 80% TRISE 5 ns VOD = 100mV, VUD = 100mV 8
Output fall time, 80% to 20% TFALL 5 ns VOD = 100mV, VUD = 100mV 8
Toggle frequency FTOGGLE 7.5 MHz VID = 200mV 8
Junction-to-ambient thermal resistance RθJA 151.4 °C/W DGS, 10 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 55 °C/W DGS, 10 pins 6
Junction-to-board thermal resistance RθJB 84.9 °C/W DGS, 10 pins 6
Junction-to-top characterization parameter ψJT 3.2 °C/W DGS, 10 pins 6
Junction-to-board characterization parameter ψJB 83.7 °C/W DGS, 10 pins 6

CAD (Adom-generated)

  • Symbol: TLV1872DGSR
  • Footprint: Adom_Gen:Texas_Instruments_TLV1872_f11dc1
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tlv1872dgsr-etched.step / tlv1872dgsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv1872dgsr.step / tlv1872dgsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 4dd501445dee1a26, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF