Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV1701AIDCKR

Texas Instruments · Comparators · SC-70-5

TLV1701AIDCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Noninverting input with rail-to-rail common-mode input voltage range from V- to V+.
2 V- power_in Negative (lowest) power supply connection; operating voltage range 2.2V to 36V between V+ and V-.
3 IN- input Inverting input with rail-to-rail common-mode input voltage range from V- to V+.
4 OUT tri_state Open-collector output with maximum sink current 20mA, output leakage current 70nA, and output swing independent of supply voltage up to 36V above V-.
5 V+ power_in Positive (highest) power supply connection; operating voltage range 2.2V to 36V (or ±1.1V to ±18V dual supply) between V+ and V-.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage 40 V 6
Signal input pins current -10 10 mA 6
Operating temperature range -55 150 °C 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Supply voltage VS 2.2 36 V VS = (VS+) – (VS–) 6
Specified temperature -40 125 °C 6
Input offset voltage VOS -3.5 0.5 3.5 mV TA = 25°C, VS = 2.2 V 7
Input offset voltage VOS -2.5 0.3 2.5 mV TA = 25°C, VS = 36 V 7
Input offset voltage VOS -5.5 5.5 mV TA = –40°C to +125°C 7
Input offset voltage drift dVOS/dT -20 4 20 μV/°C TA = –40°C to +125°C 7
Power-supply rejection ratio PSRR 15 100 μV/V 7
Power-supply rejection ratio PSRR 20 μV/V TA = –40°C to +125°C 7
Input bias current IB 5 15 nA 7
Input bias current IB 20 nA TA = –40°C to +125°C 7
Voltage output swing from rail VO 900 mV IO ≤ 4 mA, input overdrive = 100 mV, VS = 36 V 7
Voltage output swing from rail VO 600 mV IO = 0 mA, input overdrive = 100 mV, VS = 36 V 7
Output leakage current 70 nA VIN+ > VIN– 7
Specified voltage range VS 2.2 36 V 7
Quiescent current (per channel) IQ 55 75 μA IO = 0 A 7
Quiescent current (per channel) IQ 100 μA IO = 0 A, TA = –40°C to +125°C 7
Input offset current IOS 0.5 nA 7
Short circuit sink current ISC 20 mA 7
Propagation delay time, high-to-low tpHL 460 ns Input overdrive = 100 mV 7
Propagation delay time, low-to-high tpLH 560 ns Input overdrive = 100 mV 7
Rise time tR 365 ns Input overdrive = 100 mV 7
Fall time tF 240 ns Input overdrive = 100 mV 7
Junction-to-ambient thermal resistance RθJA 283.6 °C/W DCK (SC70) 5-pin package 6
Junction-to-case (top) thermal resistance RθJC(top) 94.1 °C/W DCK (SC70) 5-pin package 6
Junction-to-board thermal resistance RθJB 61.3 °C/W DCK (SC70) 5-pin package 6
Junction-to-top characterization parameter ψJT 1.9 °C/W DCK (SC70) 5-pin package 6
Junction-to-board characterization parameter ψJB 60.5 °C/W DCK (SC70) 5-pin package 6

CAD (KiCad official)

  • Symbol: TLV1701AIDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tlv1701aidckr-etched.step / tlv1701aidckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv1701aidckr.step / tlv1701aidckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 8739e728c99f3280, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF