TLV1117-50IDCYR

{
 "schema": "adom.pads/1",
 "slug": "tlv1117-50idcyr",
 "footprint": "SOT-223",
 "generated_from": {
  "footprint": "SOT-223@sha256:49f22605ecc1fc70",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -3.15,
   -2.3
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-223@sha256:49f22605ecc1fc70"
 },
 "pad_count": 4,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.15,
    -2.3
   ],
   "rot": 0.0,
   "size": [
    2.0,
    1.5
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference for the fixed-voltage (5 V) version. This pin is labeled ADJ/GND in the datasheet; on the -50 fixed-output variant it is tied to the internal reference return and must be connected to system ground.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-223.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.15,
    0.0
   ],
   "rot": 0.0,
   "size": [
    2.0,
    1.5
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "VOUT",
   "type": "power_out",
   "description": "Regulated 5-V output. Typical VOUT = 5.0 V (4.90 V to 5.10 V over line/load, TLV1117-50I). Sources up to 800 mA. Requires an output capacitor with ESR between 0.2 Ω and 10 Ω (10-µF tantalum/aluminum electrolytic recommended) for stability.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.15,
    2.3
   ],
   "rot": 0.0,
   "size": [
    2.0,
    1.5
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "VIN",
   "type": "power_in",
   "description": "Unregulated input supply. Recommended VIN = 6.4 V to 15 V for the 5-V option (headroom above VOUT + dropout). Absolute maximum continuous input voltage is 16 V. A 10-µF input capacitor is recommended.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    3.15,
    0.0
   ],
   "rot": 0.0,
   "size": [
    2.0,
    3.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "VOUT",
   "type": "power_out",
   "description": "Tab pin, electrically connected to the VOUT node and serving as the primary thermal path. Should be soldered to a copper pour tied to VOUT to sink the regulator's dissipated power.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}