Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV1117-33CDCYR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223

TLV1117-33CDCYR from Texas Instruments, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ/GND input Ground pin for fixed-voltage variants (TLV1117-33 = 3.3-V fixed). On the adjustable TLV1117 this pin is the ADJ feedback input for the external resistor divider; on fixed-output devices such as the -33 it functions as the device ground reference.
2 OUTPUT power_out Regulated 3.3-V output. Supplies up to 800 mA. Requires an output capacitor for stability; place close to the pin. KiCad's SOT-223-3_TabPin2 joins the tab to this pad (the DCY tab is drawn as OUTPUT).
3 INPUT power_in Unregulated input voltage pin. For the TLV1117-33 the recommended V_IN range is 4.7 V to 15 V (absolute maximum 16 V). Bypass with a capacitor close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-223
Category PMIC
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (TLV1117-33) VIN 4.7 15 V TLV1117-33 5
Output current IOUT 0.8 A 5
Output capacitor ESR (new chip, fixed output) COUT ESR 2 500 mΩ new chip, fixed output 5
Junction temperature (C version) TJ 0 125 °C TLV1117C 5
Continuous input voltage VIN -0.3 16 V all voltages with respect to GND 4
Output voltage (new chip, fixed version only) VOUT -0.3 V new chip, fixed version only; max printed as VIN + 0.3 V or 16 V (whichever is smaller) 4
Operating junction temperature Tj -50 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance (DCY, fixed output, new chip) RθJA 95.4 °C/W DCY (SOT-223), fixed output, new chip 6
Junction-to-case (top) thermal resistance (DCY, fixed output, new chip) RθJC(top) 55.6 °C/W DCY (SOT-223), fixed output, new chip 6
Junction-to-board thermal resistance (DCY, fixed output, new chip) RθJB 33.7 °C/W DCY (SOT-223), fixed output, new chip 6
Junction-to-top characterization parameter (DCY, fixed output, new chip) ΨJT 13.9 °C/W DCY (SOT-223), fixed output, new chip 6
Junction-to-board characterization parameter (DCY, fixed output, new chip) ΨJB 33.4 °C/W DCY (SOT-223), fixed output, new chip 6
Output voltage accuracy (-33) VOUT 3.267 3.3 3.333 V VIN = 5V, IOUT = 10mA, TJ = 25°C 7
Output voltage over line and load (C-33) VOUT 3.235 3.3 3.365 V VIN = 4.75V to 10V, IOUT = 0mA to 800mA 7
Line regulation (C, percent) ΔVOUT(ΔVIN) 0.035 0.2 % IOUT = 10mA, VIN, VOUT = 1.5V to 13.75V 7
Line regulation (C-33) ΔVOUT(ΔVIN) 1 6 mV IOUT = 0mA, VIN = 4.75V to 15V 7
Load regulation (C-33) ΔVOUT(ΔIOUT) 1 10 mV IOUT = 0mA to 800mA, VIN = 4.75V 7
Load regulation (25°C, percent) ΔVOUT(ΔIOUT) 0.2 % VIN, VOUT = 3V, 10mA ≤ IOUT ≤ 800mA, TJ = 25℃ 7
Load regulation (C, percent) ΔVOUT(ΔIOUT) 0.4 % VIN, VOUT = 3V, 10mA ≤ IOUT ≤ 800mA 7
Dropout voltage (new chip, fixed) VDO 0.2 0.4 V IOUT = 100mA 8
Dropout voltage (new chip, fixed) VDO 0.5 0.8 V IOUT = 500mA 8
Dropout voltage (new chip, fixed) VDO 0.8 1.2 V IOUT = 800mA 8
Output current limit (new chip, fixed output) ICL 1.1 1.6 A VOUT = 0.9 x VOUT(NOM), VIN = VOUT(nom) + 1.5V or VIN = 4.3V (whichever is greater) 8
Short-circuit current limit (new chip, fixed output) ISC 150 250 350 mA VOUT = 0V 8
Minimum load current IMIN(LOAD) 1.7 5 mA VIN = 15V 8
Quiescent current (new chip, fixed output) IQ 65 110 µA IOUT = 0mA, VIN = 15V 8
Thermal regulation 0.01 0.1 %/W TA = 25°C, 30ms pulse 8
Ripple rejection (new chip, fixed output) PSRR 70 dB fRIPPLE = 120Hz, VIN, VOUT = 3V, VRIPPLE = 1VPP 8
Output pulldown current (new chip, fixed output) IPULLDOWN 0.7 1.1 mA VIN = 1.8V, VOUT = 2.5V 8
UVLO threshold rising (new chip, fixed output) VUVLO+ 2.2 2.4 V VIN rising 8
Thermal shutdown temperature (new chip, fixed output) TSD(shutdown) 180 °C temperature increasing 8
Thermal shutdown reset temperature (new chip, fixed output) TSD(reset) 160 °C temperature falling 8

CAD (KiCad official)

  • Symbol: TLV1117-33CDCYR
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223 (KiCad packages3D, STEP)
  • 3D model files: tlv1117-33cdcyr-etched.step / tlv1117-33cdcyr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv1117-33cdcyr.step / tlv1117-33cdcyr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (56 pp, sha256 e01707efdfe640bb, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF