Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
TLV1117-25IDCYR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-4
TLV1117-25IDCYR from Texas Instruments, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | Ground reference pin for fixed output version; serves as the adjustment pin for adjustable output versions. |
| 2 | VOUT | output | Regulated output voltage pin producing 2.5V nominal output; supports 0.8A maximum output current. |
| 3 | VIN | power_in | Input voltage supply pin; recommended operating range 3.9V to 15V for TLV1117-25 fixed output. |
| 4 | VOUT | output | Output voltage pad or exposed die pad; typically connected to VOUT for lower impedance or serves as thermal pad. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-4 |
| Category | Power Management (PMIC) |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, TJ=25°C (TLV1117C/I-25) | VOUT | 2.475 | 2.5 | 2.525 | V | VIN = 4.5V,IOUT = 10mA,TJ = 25℃ | 7 |
| Output voltage, full range (TLV1117I-25) | VOUT | 2.4 | 2.5 | 2.6 | V | VIN = 3.9V 至 10V,IOUT = 0mA 至 800mA | 7 |
| Line regulation (TLV1117I-25) | ΔVOUT(ΔVIN) | 1 | 10 | mV | IOUT = 0mA,VIN = 3.9V 至 10V | 7 | |
| Load regulation (TLV1117I-25) | ΔVOUT(ΔIOUT) | 1 | 15 | mV | IOUT = 0mA 至 800mA,VIN = 3.9V | 7 | |
| Line regulation, percent (TLV1117I) | ΔVOUT(ΔVIN) | 0.035 | 0.3 | % | IOUT = 10mA,VIN, VOUT = 1.5V to 13.75V | 7 | |
| Dropout voltage, old chip (TLV1117I) | VDO | 1.1 | 1.3 | V | IOUT = 100mA | 8 | |
| Dropout voltage, old chip (TLV1117I) | VDO | 1.15 | 1.35 | V | IOUT = 500mA | 8 | |
| Dropout voltage, old chip (TLV1117I) | VDO | 1.2 | 1.4 | V | IOUT = 800mA | 8 | |
| Dropout voltage, new chip fixed (TLV1117C/I) | VDO | 0.2 | 0.4 | V | IOUT = 100mA | 8 | |
| Dropout voltage, new chip fixed (TLV1117C/I) | VDO | 0.5 | 0.8 | V | IOUT = 500mA | 8 | |
| Dropout voltage, new chip fixed (TLV1117C/I) | VDO | 0.8 | 1.2 | V | IOUT = 800mA | 8 | |
| Output current limit, 25°C (TLV1117C/I) | ICL | 0.8 | 1.2 | 1.6 | A | VIN, VOUT = 5V,TJ = 25℃ | 8 |
| Output current limit, new chip fixed | ICL | 1.1 | 1.6 | A | VOUT = 0.9 x VOUT(NOM),VIN = VOUT(nom) + 1.5V 或 VIN = 4.3V(以较大者为准) | 8 | |
| Short-circuit current limit, new chip fixed | ISC | 150 | 250 | 350 | mA | VOUT = 0V | 8 |
| Minimum load current (TLV1117C/I) | IMIN(LOAD) | 1.7 | 5 | mA | VIN = 15V | 8 | |
| Quiescent current, old chip fixed (TLV1117I) | IQ | 5 | 15 | mA | VIN ≤ 15V | 8 | |
| Quiescent current, new chip fixed (TLV1117C/I) | IQ | 65 | 110 | µA | IOUT = 0mA,VIN = 15V | 8 | |
| Thermal regulation (TLV1117C/I) | 0.01 | 0.1 | %/W | TA = 25°C,30ms 脉冲 | 8 | ||
| Ripple rejection, old chip (TLV1117C/I) | PSRR | 60 | 75 | dB | fRIPPLE = 120Hz,VIN, VOUT = 3V,VRIPPLE = 1VPP | 8 | |
| ADJ/ground pin pulldown current, new chip fixed | IPULLDOWN | 0.7 | 1.1 | mA | VIN = 1.8V,VOUT = 2.5V | 8 | |
| Thermal shutdown temperature, new chip fixed | TSD(shutdown) | 180 | °C | 温度升高 | 8 | ||
| Thermal shutdown reset temperature, new chip fixed | TSD(reset) | 160 | °C | 温度下降 | 8 | ||
| Junction-to-ambient thermal resistance, DCY, new chip fixed | RθJA | 95.4 | °C/W | 6 | |||
| Junction-to-case top thermal resistance, DCY, new chip fixed | RθJC(top) | 55.6 | °C/W | 6 | |||
| Junction-to-board thermal resistance, DCY, new chip fixed | RθJB | 33.7 | °C/W | 6 | |||
| Junction-to-top characterization parameter, DCY, new chip fixed | ΨJT | 13.9 | °C/W | 6 | |||
| Junction-to-board characterization parameter, DCY, new chip fixed | ΨJB | 33.4 | °C/W | 6 | |||
| Junction-to-ambient thermal resistance, DCY, old chip | RθJA | 104.3 | °C/W | 6 | |||
| Junction-to-case top thermal resistance, DCY, old chip | RθJC(top) | 53.7 | °C/W | 6 | |||
| Junction-to-board thermal resistance, DCY, old chip | RθJB | 5.7 | °C/W | 6 | |||
| Junction-to-top characterization parameter, DCY, old chip | ΨJT | 3.1 | °C/W | 6 | |||
| Junction-to-board characterization parameter, DCY, old chip | ΨJB | 5.5 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
TLV1117-25IDCYR - Footprint:
Package_TO_SOT_SMD:SOT-223 - 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files:
tlv1117-25idcyr-etched.step/tlv1117-25idcyr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv1117-25idcyr.step/tlv1117-25idcyr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (56 pp, sha256
a83ebeff6192a9d0, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).