← Commit history
README.md+43−4
@@ -2,13 +2,13 @@  **Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-4 -TLV1117-25IDCYR from Texas Instruments, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+TLV1117-25IDCYR from Texas Instruments, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | GND | power_in | Ground reference pin for fixed output version; serves as the adjustment pin for adjustable output versions. |+| 1 | ADJ/GND | power_in | Ground reference pin for fixed output version; serves as the adjustment pin for adjustable output versions. | | 2 | VOUT | output | Regulated output voltage pin producing 2.5V nominal output; supports 0.8A maximum output current. | | 3 | VIN | power_in | Input voltage supply pin; recommended operating range 3.9V to 15V for TLV1117-25 fixed output. | | 4 | VOUT | output | Output voltage pad or exposed die pad; typically connected to VOUT for lower impedance or serves as thermal pad. |@@ -22,6 +22,45 @@ TLV1117-25IDCYR from Texas Instruments, in a SOT-223-4. Pinout and pin descripti | Category | Power Management (PMIC) | | Pins | 4 | +## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Output voltage, TJ=25°C (TLV1117C/I-25) | VOUT | 2.475 | 2.5 | 2.525 | V | VIN = 4.5V,IOUT = 10mA,TJ = 25℃ | 7 |+| Output voltage, full range (TLV1117I-25) | VOUT | 2.4 | 2.5 | 2.6 | V | VIN = 3.9V 至 10V,IOUT = 0mA 至 800mA | 7 |+| Line regulation (TLV1117I-25) | ΔVOUT(ΔVIN) |  | 1 | 10 | mV | IOUT = 0mA,VIN = 3.9V 至 10V | 7 |+| Load regulation (TLV1117I-25) | ΔVOUT(ΔIOUT) |  | 1 | 15 | mV | IOUT = 0mA 至 800mA,VIN = 3.9V | 7 |+| Line regulation, percent (TLV1117I) | ΔVOUT(ΔVIN) |  | 0.035 | 0.3 | % | IOUT = 10mA,VIN, VOUT = 1.5V to 13.75V | 7 |+| Dropout voltage, old chip (TLV1117I) | VDO |  | 1.1 | 1.3 | V | IOUT = 100mA | 8 |+| Dropout voltage, old chip (TLV1117I) | VDO |  | 1.15 | 1.35 | V | IOUT = 500mA | 8 |+| Dropout voltage, old chip (TLV1117I) | VDO |  | 1.2 | 1.4 | V | IOUT = 800mA | 8 |+| Dropout voltage, new chip fixed (TLV1117C/I) | VDO |  | 0.2 | 0.4 | V | IOUT = 100mA | 8 |+| Dropout voltage, new chip fixed (TLV1117C/I) | VDO |  | 0.5 | 0.8 | V | IOUT = 500mA | 8 |+| Dropout voltage, new chip fixed (TLV1117C/I) | VDO |  | 0.8 | 1.2 | V | IOUT = 800mA | 8 |+| Output current limit, 25°C (TLV1117C/I) | ICL | 0.8 | 1.2 | 1.6 | A | VIN, VOUT = 5V,TJ = 25℃ | 8 |+| Output current limit, new chip fixed | ICL | 1.1 |  | 1.6 | A | VOUT = 0.9 x VOUT(NOM),VIN = VOUT(nom) + 1.5V 或 VIN = 4.3V(以较大者为准) | 8 |+| Short-circuit current limit, new chip fixed | ISC | 150 | 250 | 350 | mA | VOUT = 0V | 8 |+| Minimum load current (TLV1117C/I) | IMIN(LOAD) |  | 1.7 | 5 | mA | VIN = 15V | 8 |+| Quiescent current, old chip fixed (TLV1117I) | IQ |  | 5 | 15 | mA | VIN ≤ 15V | 8 |+| Quiescent current, new chip fixed (TLV1117C/I) | IQ |  | 65 | 110 | µA | IOUT = 0mA,VIN = 15V | 8 |+| Thermal regulation (TLV1117C/I) |  |  | 0.01 | 0.1 | %/W | TA = 25°C,30ms 脉冲 | 8 |+| Ripple rejection, old chip (TLV1117C/I) | PSRR | 60 | 75 |  | dB | fRIPPLE = 120Hz,VIN, VOUT = 3V,VRIPPLE = 1VPP | 8 |+| ADJ/ground pin pulldown current, new chip fixed | IPULLDOWN |  | 0.7 | 1.1 | mA | VIN = 1.8V,VOUT = 2.5V | 8 |+| Thermal shutdown temperature, new chip fixed | TSD(shutdown) |  | 180 |  | °C | 温度升高 | 8 |+| Thermal shutdown reset temperature, new chip fixed | TSD(reset) |  | 160 |  | °C | 温度下降 | 8 |+| Junction-to-ambient thermal resistance, DCY, new chip fixed | RθJA |  | 95.4 |  | °C/W |  | 6 |+| Junction-to-case top thermal resistance, DCY, new chip fixed | RθJC(top) |  | 55.6 |  | °C/W |  | 6 |+| Junction-to-board thermal resistance, DCY, new chip fixed | RθJB |  | 33.7 |  | °C/W |  | 6 |+| Junction-to-top characterization parameter, DCY, new chip fixed | ΨJT |  | 13.9 |  | °C/W |  | 6 |+| Junction-to-board characterization parameter, DCY, new chip fixed | ΨJB |  | 33.4 |  | °C/W |  | 6 |+| Junction-to-ambient thermal resistance, DCY, old chip | RθJA |  | 104.3 |  | °C/W |  | 6 |+| Junction-to-case top thermal resistance, DCY, old chip | RθJC(top) |  | 53.7 |  | °C/W |  | 6 |+| Junction-to-board thermal resistance, DCY, old chip | RθJB |  | 5.7 |  | °C/W |  | 6 |+| Junction-to-top characterization parameter, DCY, old chip | ΨJT |  | 3.1 |  | °C/W |  | 6 |+| Junction-to-board characterization parameter, DCY, old chip | ΨJB |  | 5.5 |  | °C/W |  | 6 |+ ## CAD (KiCad official)  - Symbol: `TLV1117-25IDCYR`@@ -33,9 +72,9 @@ TLV1117-25IDCYR from Texas Instruments, in a SOT-223-4. Pinout and pin descripti  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlv1117) (56 pp, sha256 `a83ebeff6192a9d0`, retrieved 2026-10-03, tier: lcsc)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlv1117) (56 pp, sha256 `a83ebeff6192a9d0`, retrieved 2026-11-13, tier: manufacturer) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/tlv1117-25idcyr-datasheet.pdf)
docs/hero.png
⋯ 1 unchanged line ⋯
package.json+77−26
@@ -1,8 +1,8 @@ {   "slug": "tlv1117-25idcyr",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "power management (pmic)",@@ -53,12 +53,11 @@       "mouser": "595-TLV1117-25IDCYR"     },     "distributor_check": {-      "checked_at": "2026-10-03T07:09:53Z",+      "checked_at": "2026-11-13T02:20:06Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-TLV1117-25IDCYRTR-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "595-TLV1117-25IDCYR",@@ -68,7 +67,7 @@     "pins": [       {         "number": "1",-        "name": "GND",+        "name": "ADJ/GND",         "type": "power_in",         "description": "Ground reference pin for fixed output version; serves as the adjustment pin for adjustable output versions."       },@@ -92,27 +91,12 @@       }     ],     "provenance": {-      "extractor": "extract_pins 0.3",-      "factory_chain": {-        "factory": "2.0.0",-        "extractor": "extract_pins 0.3",-        "primary_model": "claude-haiku-4-5-20251001",-        "primary_mode": "text",-        "consensus_model": "claude-sonnet-5-5",-        "consensus": "agreed",-        "guards": "pin_guards 0.1: passed",-        "guard_notes": [-          "extractor flagged: Pin 4 of the DCY (SOT-223-4) package is shown in the diagram as 'OUTPUT' but is not explicitly defin"-        ],-        "pages_sent": 33,-        "cost_usd": 0.2497,-        "at": "2026-10-03T07:09:26"-      },+      "extractor": "ds2sf",       "datasheet": {         "url": "https://www.ti.com/cn/lit/gpn/tlv1117",         "pages": 56,         "sha256": "a83ebeff6192a9d0",-        "source_tier": "lcsc"+        "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -127,6 +111,25 @@       "footprint": "viewers/footprint.html"     },     "models_3d": [+      {+        "file": "tlv1117-25idcyr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.0,+          6.5,+          1.7+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },       {         "file": "tlv1117-25idcyr-etched.step",         "role": "eda",@@ -142,10 +145,58 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "6f4c399d1099764f40c7903d8c7bcd64405a9e46c68be8a0ac9202feff594650",-        "checked": "2026-10-16",+        "sha256": "fa179fecdf64abe6655069b9c8e569794297cdfb289d3d943f31de2cebf23553",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "package_dims": {+      "package_code": "DCY",+      "source_page": 51,+      "D": {+        "nom_mm": 6.5,+        "range_mm": [+          6.3,+          6.7+        ]+      },+      "E1": {+        "nom_mm": 3.5,+        "range_mm": [+          3.3,+          3.7+        ]+      },+      "E": {+        "nom_mm": 7.0,+        "range_mm": [+          6.7,+          7.3+        ]+      },+      "e": {+        "nom_mm": 2.3,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.8,+        "range_mm": [+          null,+          1.8+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "tlv1117-25idcyr.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }   } }
page.json+83−32
@@ -4,7 +4,7 @@   "slug": "tlv1117-25idcyr",   "title": "TLV1117-25IDCYR",   "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,12 +36,11 @@       "mouser": "595-TLV1117-25IDCYR"     },     "distributor_check": {-      "checked_at": "2026-10-03T07:09:53Z",+      "checked_at": "2026-11-13T02:20:06Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-TLV1117-25IDCYRTR-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "595-TLV1117-25IDCYR",@@ -51,7 +50,7 @@     "pins": [       {         "number": "1",-        "name": "GND",+        "name": "ADJ/GND",         "type": "power_in",         "description": "Ground reference pin for fixed output version; serves as the adjustment pin for adjustable output versions."       },@@ -75,27 +74,12 @@       }     ],     "provenance": {-      "extractor": "extract_pins 0.3",-      "factory_chain": {-        "factory": "2.0.0",-        "extractor": "extract_pins 0.3",-        "primary_model": "claude-haiku-4-5-20251001",-        "primary_mode": "text",-        "consensus_model": "claude-sonnet-5-5",-        "consensus": "agreed",-        "guards": "pin_guards 0.1: passed",-        "guard_notes": [-          "extractor flagged: Pin 4 of the DCY (SOT-223-4) package is shown in the diagram as 'OUTPUT' but is not explicitly defin"-        ],-        "pages_sent": 33,-        "cost_usd": 0.2497,-        "at": "2026-10-03T07:09:26"-      },+      "extractor": "ds2sf",       "datasheet": {         "url": "https://www.ti.com/cn/lit/gpn/tlv1117",         "pages": 56,         "sha256": "a83ebeff6192a9d0",-        "source_tier": "lcsc"+        "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -110,6 +94,25 @@       "footprint": "viewers/footprint.html"     },     "models_3d": [+      {+        "file": "tlv1117-25idcyr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7,+          6.5,+          1.7+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },       {         "file": "tlv1117-25idcyr-etched.step",         "role": "eda",@@ -118,18 +121,66 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          7.0,+          7,           6.5,           1.7         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "6f4c399d1099764f40c7903d8c7bcd64405a9e46c68be8a0ac9202feff594650",-        "checked": "2026-10-16",+        "sha256": "fa179fecdf64abe6655069b9c8e569794297cdfb289d3d943f31de2cebf23553",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "package_dims": {+      "package_code": "DCY",+      "source_page": 51,+      "D": {+        "nom_mm": 6.5,+        "range_mm": [+          6.3,+          6.7+        ]+      },+      "E1": {+        "nom_mm": 3.5,+        "range_mm": [+          3.3,+          3.7+        ]+      },+      "E": {+        "nom_mm": 7,+        "range_mm": [+          6.7,+          7.3+        ]+      },+      "e": {+        "nom_mm": 2.3,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.8,+        "range_mm": [+          null,+          1.8+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "tlv1117-25idcyr.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }   },   "metadata": {     "specs": {@@ -175,7 +226,7 @@     "tlv1117-25idcyr-hero.glb",     "tlv1117-25idcyr-hero.overlay.json"   ],-  "visibility": {-    "public": true-  }-}+  "visibility": "public",+  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
tlv1117-25idcyr-hero.glb
⋯ 1 unchanged line ⋯
tlv1117-25idcyr-hero.overlay.json+6−3
@@ -52,6 +52,9 @@  },  "align": {   "ok": true,+  "board_underside": false,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],   "centre_offset_mm": 0.0,   "over_pads": true,   "tolerance_mm": 0.664,@@ -74,15 +77,15 @@   "glb": "tlv1117-25idcyr-etched.glb",   "glb_sha256": "481219cda741fbbaf31e27f68063e9d7df18c661cadf29be41767ccbe3d8327a",   "footprint": "tlv1117-25idcyr.kicad_mod",-  "footprint_sha256": "49f22605ecc1fc70661654e09eb86ebe3545a2a8a8c98dd6039bf2bc4b9f4839",+  "footprint_sha256": "3e4cc90faee60c2b715bffae94c18bb43ed59673056acda51bb157b935645ce2",   "pins": "page.json component.pins",-  "pins_sha256": "a2d8a95f53516c8dac0d32f47d3b93d9a191bd9301ce071c62eb7d5181fa5ef8"+  "pins_sha256": "12a81b115004074bb0808202f8284165b93ed66e230d4680c9165ba3221dac6b"  },  "generator": "factory/hero_glb.py",  "labels": [   {    "pad": "1",-   "text": "GND",+   "text": "ADJ/GND",    "x": -4.3,    "y": -2.3,    "align": "right",
tlv1117-25idcyr.kicad_mod+6−40
@@ -107,46 +107,6 @@ 		(layer "F.SilkS") 		(uuid "818bd365-7a79-40a2-b037-dacc75b8af05") 	)-	(fp_line-		(start -4.4 -3.6)-		(end -4.4 3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "1e6e1c3c-cf2e-4570-9270-1e4425f802c5")-	)-	(fp_line-		(start -4.4 3.6)-		(end 4.4 3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "fe006c7f-e9e9-42b8-94e6-7fab62e45a96")-	)-	(fp_line-		(start 4.4 -3.6)-		(end -4.4 -3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "18a70f3a-ba6f-445d-a1d1-b2229acce0b4")-	)-	(fp_line-		(start 4.4 3.6)-		(end 4.4 -3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "1cb64177-a033-440a-bc55-482358e05d6e")-	) 	(fp_line 		(start -1.85 -2.3) 		(end -1.85 3.35)@@ -248,4 +208,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -4.40 -3.30) (xy -2.10 -3.30) (xy -2.10 -3.60) (xy 2.10 -3.60) (xy 2.10 -2.15) (xy 4.40 -2.15) (xy 4.40 2.15) (xy 2.10 2.15) (xy 2.10 3.60) (xy -2.10 3.60) (xy -2.10 3.30) (xy -4.40 3.30))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
tlv1117-25idcyr.kicad_sym+1−1
@@ -9,7 +9,7 @@     )     (symbol "TLV1117-25IDCYR_1_1"     (pin power_in line (at -17.78 0.00 0) (length 5.08)-      (name "GND" (effects (font (size 1.27 1.27))))+      (name "ADJ/GND" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )     (pin output line (at -17.78 -2.54 0) (length 5.08)
tlv1117-25idcyr.lbr+15−5
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOT-223">   <description>4 pads, 8.3 x 6.1 mm. module CMS SOT223 4 pins</description>@@ -79,13 +79,14 @@ </packages> <symbols> <symbol name="TLV1117-25IDCYR">+  <description>Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>   <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>   <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>   <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>+  <pin name="ADJ/GND" x="-17.78" y="0" length="middle" direction="pwr"/>   <pin name="VOUT" x="-17.78" y="-2.54" length="middle" direction="out"/>   <pin name="VOUT@2" x="17.78" y="0" length="middle" direction="out" rot="R180"/>   <pin name="VIN" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>@@ -93,19 +94,28 @@ </symbols> <devicesets> <deviceset name="TLV1117-25IDCYR" prefix="U">-  <description></description>+  <description>Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="TLV1117-25IDCYR" x="0" y="0"/>   </gates>   <devices>     <device name="" package="SOT-223">       <connects>-        <connect gate="G$1" pin="GND" pad="1"/>+        <connect gate="G$1" pin="ADJ/GND" pad="1"/>         <connect gate="G$1" pin="VOUT" pad="2"/>         <connect gate="G$1" pin="VOUT@2" pad="4"/>         <connect gate="G$1" pin="VIN" pad="3"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="TLV1117-25IDCYR" constant="no"/>+          <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+          <attribute name="DATASHEET" value="https://www.ti.com/cn/lit/gpn/tlv1117" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/tlv1117-25idcyr" constant="no"/>+          <attribute name="MOUSER_PN" value="595-TLV1117-25IDCYR" constant="no"/>+          <attribute name="DIGIKEY_PN" value="296-TLV1117-25IDCYRTR-ND" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>