main
Ray
Publish 0.1.0
5605644
TLS820F1ELV50XUMA1
Infineon Technologies · Linear Voltage Regulators (LDO) · SSOP-14
TLS820F1ELV50XUMA1 from Infineon Technologies, in a SSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I | power_in | Input supply pin; a small ceramic capacitor (e.g. 100 nF) to GND close to the IC is recommended to compensate line influences. |
| 2 | n.c. | unconnected | Not connected; leave open or connect to GND. |
| 3 | EN | input | Enable input with integrated pull-down; high level enables the IC and low level disables it. |
| 4 | n.c. | unconnected | Not connected; leave open or connect to GND. |
| 5 | GND | power_in | Ground reference pin for the regulator. |
| 6 | n.c. | unconnected | Not connected; leave open or connect to GND. |
| 7 | WI | input | Watchdog trigger input with integrated pull-down, used to serve the watchdog from a microcontroller. |
| 8 | RADJ | input | Reset threshold adjustment: connect to GND for the standard value or to an external voltage divider to set a different reset threshold. |
| 9 | DT1 | input | Delay timing 1 with integrated pull-down; connect to GND or Q to select the reset timing and watchdog timing per the datasheet tables. |
| 10 | DT2 | input | Delay timing 2 with integrated pull-down; connect to GND or Q to select the watchdog timing per the datasheet table. |
| 11 | RO | output | Reset output, open collector with integrated pull-up to Q; leave open if the reset function is not needed. |
| 12 | WO | output | Watchdog output, open collector with integrated pull-up to Q; leave open if the watchdog function is not needed. |
| 13 | n.c. | unconnected | Not connected; leave open or connect to GND. |
| 14 | Q | power_out | Regulated 5 V output; connect output capacitor CQ to GND close to the IC terminals, respecting the capacitance and ESR values in Functional Range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SSOP-14 |
| Category | Power Supply Chip |
| Pins | 14 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pet | watchdog function monitors a microcontroller, including time base failures. In case of a missing falling edge within a certain pulse repetition time, the watchdog output “WO” is set to “low”. | 25 |
CAD (KiCad official)
- Symbol:
TLS820F1ELV50XUMA1 - Footprint:
Package_SO:SSOP-14_5.3x6.2mm_P0.65mm - 3D model: SSOP-14 (KiCad packages3D, STEP)
- 3D model files:
tls820f1elv50xuma1-etched.step/tls820f1elv50xuma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tls820f1elv50xuma1.step/tls820f1elv50xuma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (36 pp, sha256
d1603d4dd18cc04b, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLS820F1ELV50XUMA1
**Infineon Technologies** · Linear Voltage Regulators (LDO) · SSOP-14
TLS820F1ELV50XUMA1 from Infineon Technologies, in a SSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I | power_in | Input supply pin; a small ceramic capacitor (e.g. 100 nF) to GND close to the IC is recommended to compensate line influences. |
| 2 | n.c. | unconnected | Not connected; leave open or connect to GND. |
| 3 | EN | input | Enable input with integrated pull-down; high level enables the IC and low level disables it. |
| 4 | n.c. | unconnected | Not connected; leave open or connect to GND. |
| 5 | GND | power_in | Ground reference pin for the regulator. |
| 6 | n.c. | unconnected | Not connected; leave open or connect to GND. |
| 7 | WI | input | Watchdog trigger input with integrated pull-down, used to serve the watchdog from a microcontroller. |
| 8 | RADJ | input | Reset threshold adjustment: connect to GND for the standard value or to an external voltage divider to set a different reset threshold. |
| 9 | DT1 | input | Delay timing 1 with integrated pull-down; connect to GND or Q to select the reset timing and watchdog timing per the datasheet tables. |
| 10 | DT2 | input | Delay timing 2 with integrated pull-down; connect to GND or Q to select the watchdog timing per the datasheet table. |
| 11 | RO | output | Reset output, open collector with integrated pull-up to Q; leave open if the reset function is not needed. |
| 12 | WO | output | Watchdog output, open collector with integrated pull-up to Q; leave open if the watchdog function is not needed. |
| 13 | n.c. | unconnected | Not connected; leave open or connect to GND. |
| 14 | Q | power_out | Regulated 5 V output; connect output capacitor CQ to GND close to the IC terminals, respecting the capacitance and ESR values in Functional Range. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SSOP-14 |
| Category | Power Supply Chip |
| Pins | 14 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pet | | watchdog function monitors a microcontroller, including time base failures. In case of a missing falling edge within a certain pulse repetition time, the watchdog output “WO” is set to “low”. | 25 |
## CAD (KiCad official)
- Symbol: `TLS820F1ELV50XUMA1`
- Footprint: `Package_SO:SSOP-14_5.3x6.2mm_P0.65mm`
- 3D model: SSOP-14 (KiCad packages3D, STEP)
- 3D model files: `tls820f1elv50xuma1-etched.step` / `tls820f1elv50xuma1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tls820f1elv50xuma1.step` / `tls820f1elv50xuma1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Infineon Technologies datasheet](docs/tls820f1elv50xuma1-datasheet.pdf) (36 pp, sha256 `d1603d4dd18cc04b`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tls820f1elv50xuma1-datasheet.pdf)