component
TLR2376YFJ-CE2
Public Made by Adomby adom
ROHM Semicon Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLR2376YFJ-CE2
ROHM Semicon · Operational Amplifier · SOP-8
TLR2376YFJ-CE2 from ROHM Semicon, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output 1 of the first amplifier channel. |
| 2 | -IN1 | input | Inverting input 1 of the first amplifier channel. |
| 3 | +IN1 | input | Non-inverting input 1 of the first amplifier channel. |
| 4 | VSS | power_in | Negative power supply / ground pin. |
| 5 | +IN2 | input | Non-inverting input 2 of the second amplifier channel. |
| 6 | -IN2 | input | Inverting input 2 of the second amplifier channel. |
| 7 | OUT2 | output | Output 2 of the second amplifier channel. |
| 8 | VDD | power_in | Positive power supply pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VDD - VSS) | VS | 7 | V | 4 | |||
| Signal Input Pin Current (+IN, -IN) | II | -10 | 10 | mA | +IN, -IN | 4 | |
| Storage Temperature Range | Tstg | -55 | 150 | °C | 4 | ||
| Maximum Junction Temperature | Tjmax | 150 | °C | 4 | |||
| Input Offset Voltage | VIO | 1.7 | 150 | μV | No load, Absolute value | 5 | |
| Input Offset Voltage | VIO | 550 | μV | No load, Absolute value, Ta = -40 °C to +125 °C | 5 | ||
| Input Offset Voltage Temperature Drift | ΔVIO/ΔT | 0.1 | 4 | μV/°C | Absolute value, No load, Ta = -40 °C to +125 °C | 5 | |
| Common-mode Input Voltage Range | VICMR | 0 | 5 | V | VSS to VDD | 5 | |
| Supply Current | IDD | 1245 | 1900 | μA | TLR2376Yxxx-C, No load, G = 0 dB | 5 | |
| Supply Current | IDD | 2000 | μA | TLR2376Yxxx-C, No load, G = 0 dB, Ta = -40 °C to +125 °C | 5 | ||
| Output Voltage High | VOH | 4.925 | 4.975 | V | IL = 1 mA | 5 | |
| Output Voltage High | VOH | 4.9 | V | IL = 1 mA, Ta = -40 °C to +125 °C | 5 | ||
| Output Voltage High | VOH | 4.5 | 4.75 | V | IL = 10 mA | 5 | |
| Output Voltage Low | VOL | 15 | 50 | mV | IL = 1 mA | 5 | |
| Output Voltage Low | VOL | 60 | mV | IL = 1 mA, Ta = -40 °C to +125 °C | 5 | ||
| Output Voltage Low | VOL | 100 | 250 | mV | IL = 10 mA | 5 | |
| Output Source Current | IOH | 25 | 50 | mA | VOUT = VSS, Absolute value | 5 | |
| Output Sink Current | IOL | 25 | 50 | mA | VOUT = VDD, Absolute value | 5 | |
| Large Signal Voltage Gain | AV | 110 | 137 | dB | 5 | ||
| Large Signal Voltage Gain | AV | 90 | dB | Ta = -40 °C to +125 °C | 5 | ||
| Common-mode Rejection Ratio | CMRR | 80 | 100 | dB | 5 | ||
| Power Supply Rejection Ratio | PSRR | 75 | 95 | dB | 5 | ||
| Input Offset Current | IIO | 0 | pA | Absolute value | 5 | ||
| Input Bias Current | IB | 0.5 | pA | Absolute value | 5 | ||
| Gain Bandwidth Product | GBW | 4 | MHz | G = 40 dB | 5 | ||
| Phase Margin | θ | 50 | deg | G = 40 dB | 5 | ||
| Slew Rate | SR | 2 | V/μs | CL = 25 pF | 5 | ||
| Input-Referred Noise Voltage Density | Vn | 20 | nV/√Hz | f = 10 Hz | 5 | ||
| Input-Referred Noise Voltage Density | Vn | 8 | nV/√Hz | f = 1 kHz | 5 | ||
| Total Harmonic Distortion + Noise | THD+N | 0.001 | % | VOUT = 4 Vp-p, f = 1 kHz | 5 | ||
| Channel Separation | CS | 100 | dB | input referred | 5 | ||
| Single Supply Voltage (VDD - VSS) | VS | 2.5 | 5 | 5.5 | V | Single Supply | 4 |
| Dual Supply Voltage (VDD - VSS) | VS | 1.25 | 2.5 | 2.75 | V | Dual Supply (±) | 4 |
| Operating Temperature | Topr | -40 | 25 | 125 | °C | 4 | |
| Junction to Ambient (SOP-J8) | θJA | 149.3 | °C/W | 1s board, JESD51-2A still air | 4 | ||
| Junction to Ambient (SOP-J8) | θJA | 76.9 | °C/W | 2s2p board, JESD51-7 | 4 | ||
| Junction to Top Characterization Parameter (SOP-J8) | ΨJT | 18 | °C/W | 1s board, JESD51-3 | 4 | ||
| Junction to Top Characterization Parameter (SOP-J8) | ΨJT | 11 | °C/W | 2s2p board, JESD51-7 | 4 |
CAD (KiCad official)
- Symbol:
TLR2376YFJ-CE2 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tlr2376yfj-ce2-etched.step/tlr2376yfj-ce2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlr2376yfj-ce2.step/tlr2376yfj-ce2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (25 pp, sha256
e38340214a8a377e, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).