component

TLP351

Public Made by Adom

by adom

TOSHIBA Logic Output Optoisolators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentoptoisolatorstlp351factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
tlp351 / README.md
History Download
Ray Publish 0.1.0 d71f9c8 11d ago

TLP351

TOSHIBA · Logic Output Optoisolators · DIP-8

TLP351 from TOSHIBA, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 N.C. unconnected Not connected; the datasheet gives no function for this pin.
2 Anode input LED anode; the datasheet gives Absolute Maximum forward current IF of 20 mA and a recommended ON input current IF(ON) of 7.5 to 10 mA.
3 Cathode input LED cathode; the absolute maximum reverse voltage VR is 5 V.
4 N.C. unconnected Not connected; the datasheet gives no function for this pin.
5 GND power_in Detector ground; a 0.1 µF bypass capacitor must be connected between pin 8 (VCC) and pin 5 (GND).
6 VO output Detector output; peak output current is ±0.6 A max (IOPH −0.6 A, IOPL 0.6 A) and output voltage VO is 35 V max.
7 N.C. unconnected Not connected; the datasheet gives no function for this pin.
8 VCC power_in Detector supply voltage; recommended range is 10 to 30 V, with an absolute maximum of 35 V.

Key specifications

Parameter Value
Manufacturer TOSHIBA
Package DIP-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Forward current IF 20 mA 2
Peak transient forward current IFP 1 A Note 1: PW ≤ 1 μs, 300 pps 2
Reverse voltage VR 5 V 2
Power dissipation PD 40 mW 2
Junction temperature (LED) Tj 125 °C 2
“H” peak output current IOPH -0.6 A Note 2: PW ≤ 10 μs, f ≤ 15 kHz 2
“L” peak output current IOPL 0.6 A Note 2: PW ≤ 10 μs, f ≤ 15 kHz 2
Output voltage VO 35 V 2
Supply voltage VCC 35 V 2
Output power dissipation PO 260 mW 2
Junction temperature (detector) Tj 125 °C 2
Operating frequency f 25 kHz Note 3: exponential waveform IOPH ≤ −0.4 A (≤ 2.0 μs), IOPL ≤ +0.4 A (≤ 2.0 μs), Ta = 100°C 2
Storage temperature range Tstg -55 125 °C 2
Operating temperature range Topr -40 100 °C 2
Lead soldering temperature Tsol 260 °C 10 s; Note 4: 2 mm or more from lead root 2
Isolation voltage (AC, 1 minute, R.H. ≤ 60%) BVS 3750 Vrms AC, 1 minute, R.H. ≤ 60%; Note 5 2
Input current, ON IF(ON) 7.5 10 mA Note 7: input signal rise time (fall time) < 0.5 μs 2
Input voltage, OFF VF(OFF) 0 0.8 V 2
Supply voltage VCC 10 30 V 2
Peak output current IOPH/IOPL -0.2 0.2 A 2
Operating temperature Topr -40 100 °C 2
Forward voltage VF 1.55 1.7 V IF = 5 mA, Ta = 25°C 3
Input reverse current IR 10 μA VR = 5 V, Ta = 25°C 3
Output current “H” level (IOPH1) IOPH1 -0.4 -0.2 A VCC = 15 V, IF = 5 mA, V8-6 = 4 V; Note 8: IO duration ≤ 50 μs 3
Output current “H” level (IOPH2) IOPH2 -0.67 -0.4 A VCC = 15 V, IF = 5 mA, V8-6 = 10 V; Note 8: IO duration ≤ 50 μs 3
Output current “L” level (IOPL1) IOPL1 0.2 0.35 A VCC = 15 V, IF = 0 mA, V6-5 = 2 V; Note 8: IO duration ≤ 50 μs 3
Output current “L” level (IOPL2) IOPL2 0.4 0.63 A VCC = 15 V, IF = 0 mA, V6-5 = 10 V; Note 8: IO duration ≤ 50 μs 3
Output voltage “H” level VOH 6 8.5 V VCC = 10 V, IO = −100 mA, IF = 5 mA 3
Output voltage “L” level VOL 0.4 1 V IO = 100 mA, VF = 0.8 V 3
Supply current “H” level ICCH 1.4 2 mA VCC = 10 to 30 V, VO open, IF = 10 mA 3
Supply current “L” level ICCL 1.3 2 mA IF = 0 mA 3
Threshold input current L → H IFLH 2.5 5 mA VCC = 15 V, VO > 1 V 3
Threshold input voltage H → L VFHL 0.8 V VCC = 15 V, VO < 1 V 3
Supply voltage VCC 10 30 V 3
Isolation voltage (AC, 1 minute) BVS 3750 Vrms AC, 1 minute 3
Propagation delay time L → H tpLH 100 700 ns VCC = 30 V, Rg = 47 Ω, Cg = 3 nF, IF = 0 → 5 mA 4
Propagation delay time H → L tpHL 100 700 ns VCC = 30 V, Rg = 47 Ω, Cg = 3 nF, IF = 5 → 0 mA 4
Propagation delay difference between any two parts or channels PDD -500 500 ns VCC = 30 V, Rg = 47 Ω, Cg = 3 nF; /tpHL−tpLH/ 4
Common mode transient immunity at high level output CMH -10000 V/μs VCM = 1000 Vp-p, Ta = 25°C, VCC = 30 V, IF = 5 mA, VO (min) = 26 V 4
Common mode transient immunity at low level output CML 10000 V/μs VCM = 1000 Vp-p, Ta = 25°C, VCC = 30 V, IF = 0 mA, VO (max) = 1 V 4

CAD (KiCad official)

  • Symbol: TLP351
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: tlp351-etched.step / tlp351-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlp351.step / tlp351.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TOSHIBA datasheet (9 pp, sha256 b3297370a0014246, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF