component

TLP250

Public Made by Adom

by adom

TOSHIBA Logic Output Optoisolators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentoptoisolatorstlp250factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
tlp250 / README.md
History Download
Ray Publish 0.1.0 22171dc 14d ago

TLP250

TOSHIBA · Logic Output Optoisolators · DIP-8

TLP250 from TOSHIBA, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 N.C. unconnected Not connected; the datasheet lists this pin as N.C. in the pin configuration and gives no function for it.
2 Anode input LED anode input; the input threshold current is IF = 5 mA (max.) and the absolute maximum forward current is 20 mA.
3 Cathode input LED cathode input; the absolute maximum reverse voltage is 5 V.
4 N.C. unconnected Not connected; the datasheet lists this pin as N.C. in the pin configuration and gives no function for it.
5 GND power_in Ground reference for the output stage; a 0.1 µF bypass capacitor must be connected between pin 8 and pin 5, with total lead length not exceeding 1 cm.
6 VO (Output) output Push-pull driver output with peak output current rated at ±1.5 A (max.) per the features list, and recommended peak output current of ±0.5 A.
7 VO output Second driver output pin, labelled VO in the pin configuration and internally shown in parallel with pin 6; the datasheet gives no separate rating for it.
8 VCC power_in Positive supply for the detector and output stage; supply voltage range is 10 to 35 V, with recommended operating range 15 to 30 V.

Key specifications

Parameter Value
Manufacturer TOSHIBA
Package DIP-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Forward current IF 20 mA 2
Forward current derating ΔIF/ΔTa -0.36 mA / °C Ta ≥ 70°C 2
Peak transient forward current IFPT 1 A PW ≤ 1µs, 300pps (Note 1) 2
Reverse voltage VR 5 V 2
LED junction temperature Tj 125 °C 2
H peak output current IOPH -1.5 A PW ≤ 2.5µs, f ≤ 15kHz (Note 2) 2
L peak output current IOPL 1.5 A PW ≤ 2.5µs, f ≤ 15kHz (Note 2) 2
Output voltage VO 35 V Ta ≤ 70°C 2
Output voltage VO 24 V Ta = 85°C 2
Output voltage derating ΔVO/ΔTa -0.73 V / °C Ta ≥ 70°C 2
Supply voltage VCC 35 V Ta ≤ 70°C 2
Supply voltage VCC 24 V Ta = 85°C 2
Supply voltage derating ΔVCC/ΔTa -0.73 V / °C Ta ≥ 70°C 2
Detector junction temperature Tj 125 °C 2
Operating frequency f 25 kHz Note 3 2
Operating temperature range Topr -20 85 °C 2
Storage temperature range Tstg -55 125 °C 2
Lead soldering temperature Tsol 260 °C 10 s (Note 4) 2
Isolation voltage BVS 2500 Vrms AC, 1 min., R.H.≤ 60% (Note 5) 2
Input current, on IF(ON) 7 8 10 mA Note 7 2
Input voltage, off VF(OFF) 0 0.8 V 2
Supply voltage VCC 15 30 V 2
Peak output current IOPH/IOPL -0.5 0.5 A 2
Operating temperature Topr -20 25 70 °C 2
Input forward voltage VF 1.6 1.8 V IF = 10 mA, Ta = 25°C 3
Temperature coefficient of forward voltage ∆VF/∆Ta -2 mV / °C IF = 10 mA 3
Input reverse current IR 10 µA VR = 5V, Ta = 25°C 3
Input capacitance CT 45 250 pF V = 0, f = 1MHz, Ta = 25°C 3
H level output current IOPH -0.5 -1.5 A IF = 10 mA, V8−6 = 4V 3
L level output current IOPL 0.5 2 A VCC = 30V, IF = 0, V6−5 = 2.5V, (*1) Duration of IO time ≤ 50µs 3
H level output voltage VOH 11 12.8 V VCC1 = +15V, VEE1 = −15V, RL = 200Ω, IF = 5mA 3
L level output voltage VOL -14.2 -12.5 V VCC1 = +15V, VEE1 = −15V, RL = 200Ω, VF = 0.8V 3
H level supply current ICCH 11 mA VCC = 30V, IF = 10mA 3
L level supply current ICCL 11 mA VCC = 30V, IF = 0mA 3
Threshold input current L→H IFLH 1.2 5 mA VCC1 = +15V, VEE1 = −15V, RL = 200Ω, VO > 0V 3
Threshold input voltage H→L IFHL 0.8 V VCC1 = +15V, VEE1 = −15V, RL = 200Ω, VO < 0V 3
Supply voltage VCC 10 35 V 3
Capacitance (input−output) CS 1 2 pF VS = 0, f = 1MHz, Ta = 25°C 3
Propagation delay time L→H tpLH 0.15 0.5 µs IF = 8mA (Note 7), VCC1 = +15V, VEE1 = −15V, RL = 200Ω 4
Propagation delay time H→L tpHL 0.15 0.5 µs IF = 8mA (Note 7), VCC1 = +15V, VEE1 = −15V, RL = 200Ω 4
Common mode transient immunity at high level output CMH -5000 V / µs VCM = 600V, IF = 8mA, VCC = 30V, Ta = 25°C 4
Common mode transient immunity at low level output CML 5000 V / µs VCM = 600V, IF = 0mA, VCC = 30V, Ta = 25°C 4

CAD (KiCad official)

  • Symbol: TLP250
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: tlp250-etched.step / tlp250-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlp250.step / tlp250.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TOSHIBA datasheet (8 pp, sha256 f157e42e1ad8a6a7, retrieved 2026-10-14, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF