component
TLP227GA-2
Public Made by Adomby adom
TOSHIBA Solid State Relays (MOS Output), DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLP227GA-2
TOSHIBA · Solid State Relays (MOS Output) · DIP-8
TLP227GA-2 from TOSHIBA, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | LED anode, internally shorted to pin 3; absolute maximum forward current is 50 mA (derate 0.5 mA/°C above Ta 25°C) and peak forward current is 1 A (100 μs pulse, 100 pps). |
| 2 | Cathode | passive | LED cathode, internally shorted to pin 4; LED reverse voltage must not exceed 5 V. |
| 3 | Anode | passive | LED anode, internally shorted to pin 1; same LED limits apply (forward current 50 mA max, reverse voltage 5 V max). |
| 4 | Cathode | passive | LED cathode, internally shorted to pin 2; same LED limits apply (forward current 50 mA max, reverse voltage 5 V max). |
| 5 | Drain D1 | passive | Photo-MOSFET drain terminal D1; off-state output voltage must not exceed 400 V and on-state current must not exceed 120 mA (100 mA recommended). |
| 6 | Drain D2 | passive | Photo-MOSFET drain terminal D2; off-state output voltage must not exceed 400 V and on-state current must not exceed 120 mA (100 mA recommended). |
| 7 | Drain D3 | passive | Photo-MOSFET drain terminal D3; off-state output voltage must not exceed 400 V and on-state current must not exceed 120 mA (100 mA recommended). |
| 8 | Drain D4 | passive | Photo-MOSFET drain terminal D4; off-state output voltage must not exceed 400 V and on-state current must not exceed 120 mA (100 mA recommended). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward current | IF | 50 | mA | Ta = 25°C | 2 | ||
| Peak forward current | IFP | 1 | A | 100 μs pulse, 100 pps | 2 | ||
| Reverse voltage | VR | 5 | V | 2 | |||
| Junction temperature | Tj | 125 | °C | 2 | |||
| Off-state output terminal voltage | VOFF | 400 | V | 2 | |||
| On-state current | ION | 120 | mA | 2 | |||
| Storage temperature range | Tstg | -55 | 125 | °C | 2 | ||
| Operating temperature range | Topr | -40 | 85 | °C | 2 | ||
| Lead soldering temperature | Tsol | 260 | °C | 10 s | 2 | ||
| Isolation voltage | BVS | 2500 | Vrms | AC, 1 minute, R.H. ≤ 60% (Note 1) | 2 | ||
| Supply voltage | VDD | 320 | V | 2 | |||
| Forward current | IF | 5 | 7.5 | 25 | mA | 2 | |
| On-state current | ION | 100 | mA | 2 | |||
| Operating temperature | Topr | -20 | 65 | °C | 2 | ||
| Forward voltage | VF | 1 | 1.15 | 1.3 | V | IF = 10 mA | 3 |
| Reverse current | IR | 10 | μA | VR = 5 V | 3 | ||
| Off-state current | IOFF | 1 | μA | VOFF = 400 V | 3 | ||
| Trigger LED current | IFT | 1 | 3 | mA | ION = 120 mA | 3 | |
| On-state resistance | RON | 18 | 35 | Ω | ION = 120 mA, IF = 5 mA | 3 | |
| Isolation voltage (AC, 1 minute) | BVS | 2500 | Vrms | AC, 1 minute | 3 | ||
| Turn-on time | tON | 1 | ms | RL = 200 Ω, VDD = 20 V, IF = 5 mA (Note 2) | 3 | ||
| Turn-off time | tOFF | 1 | ms | RL = 200 Ω, VDD = 20 V, IF = 5 mA (Note 2) | 3 | ||
| Capacitance | CT | 30 | pF | V = 0, f = 1 MHz | 3 | ||
| Capacitance input to output | CS | 0.8 | pF | VS = 0 V, f = 1 MHz | 3 | ||
| Isolation voltage (AC, 1 second, in oil) | BVS | 5000 | Vrms | AC, 1 second (in oil) | 3 | ||
| Isolation voltage (DC, 1 minute, in oil) | BVS | 5000 | Vdc | DC, 1 minute (in oil) | 3 |
CAD (KiCad official)
- Symbol:
TLP227GA-2 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
tlp227ga-2-etched.step/tlp227ga-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlp227ga-2.step/tlp227ga-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TOSHIBA datasheet (6 pp, sha256
2fbdfa3f083264e8, retrieved 2026-10-15, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).