← Commit history

Initial commit: component/tlk1221rhar

Ray ·a735b227db ·
2 files changed +420
README.mdadded+77
@@ -0,0 +1,77 @@+# TLK1221RHAR++**Texas Instruments** · Ethernet Transceivers · VQFN-40-EP(6x6)++TLK1221RHAR from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ENABLE | input | Device enable; when held low, all circuits are disabled for ultralow-power Iddq testing; when held high, device operates normally. Internal pullup resistor. |+| 2 | TD0 | input | Transmit data bit 0; part of 10-bit parallel data input clocked on rising edge of REFCLK. |+| 3 | TD1 | input | Transmit data bit 1; part of 10-bit parallel data input clocked on rising edge of REFCLK. |+| 4 | TD2 | input | Transmit data bit 2; part of 10-bit parallel data input clocked on rising edge of REFCLK. |+| 5 | TD3 | input | Transmit data bit 3; part of 10-bit parallel data input clocked on rising edge of REFCLK. |+| 6 | VDD | power_in | Digital logic power supply for all digital circuitry and digital I/O buffers; 2.3 to 2.7 V nominal 2.5 V. |+| 7 | TD4 | input | Transmit data bit 4; part of 10-bit parallel data input clocked on rising edge of REFCLK. |+| 8 | TD5 | input | Transmit data bit 5; part of 10-bit parallel data input clocked on rising edge of REFCLK. |+| 9 | TD6 | input | Transmit data bit 6; part of 10-bit parallel data input clocked on rising edge of REFCLK. |+| 10 | TD7 | input | Transmit data bit 7; part of 10-bit parallel data input clocked on rising edge of REFCLK. |+| 11 | TD8 | input | Transmit data bit 8; part of 10-bit parallel data input clocked on rising edge of REFCLK. |+| 12 | TD9 | input | Transmit data bit 9; last bit of 10-bit parallel data input clocked on rising edge of REFCLK; transmitted as first bit. |+| 13 | RBCMODE | input | Receive byte clock mode select; when low selects TBI half-rate mode (30-65 MHz on RBC0, RBC1); when high selects TBI full-rate mode (60-130 MHz on RBC0). Internal pulldown resistor. |+| 14 | REFCLK | input | Reference clock input (60 MHz to 130 MHz); synchronizes receiver and transmitter interface; used to register transmit data (TD0-TD9) on rising edge. |+| 15 | LOOPEN | input | Loop enable; when high activates internal loopback path routing transmitted serial data to receiver for self-test; TXP and TXN held high-impedance during loopback. Internal pulldown resistor. |+| 16 | VDD | power_in | Digital logic power supply for all digital circuitry and digital I/O buffers; 2.3 to 2.7 V nominal 2.5 V. |+| 17 | RBC0 | output | Receive byte clock 0; recovered clock for synchronizing 10-bit output data on RD0-RD9; in half-rate mode at one-half data rate, in full-rate mode at 1/10th serial data rate. |+| 18 | RBC1 | output | Receive byte clock 1; recovered clock for synchronizing 10-bit output data on RD0-RD9; in half-rate mode 180 degrees out of phase with RBC0 at one-half data rate; in full-rate mode held low. |+| 19 | RD9 | output | Receive data bit 9; last bit of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1. |+| 20 | RD8 | output | Receive data bit 8; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1. |+| 21 | RD7 | output | Receive data bit 7; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1. |+| 22 | RD6 | output | Receive data bit 6; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1. |+| 23 | RD5 | output | Receive data bit 5; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1. |+| 24 | RD4 | output | Receive data bit 4; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1. |+| 25 | RD3 | output | Receive data bit 3; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1. |+| 26 | VDD | power_in | Digital logic power supply for all digital circuitry and digital I/O buffers; 2.3 to 2.7 V nominal 2.5 V. |+| 27 | RD2 | output | Receive data bit 2; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1. |+| 28 | RD1 | output | Receive data bit 1; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1. |+| 29 | RD0 | output | Receive data bit 0; first bit received; part of 10-bit parallel data output from transceiver to protocol layer; referenced to RBC0 and RBC1. |+| 30 | SYNC/PASS | output | Synchronous detect output asserted high upon detection of K28.5 comma pattern when SYNCEN is high; in PRBS test mode (PRBSEN = high) outputs PRBS test results (high = pass). |+| 31 | PRBSEN | input | PRBS enable; when high enables PRBS generation on transmit side and PRBS verification on receive side; allows bit-error-rate testing of serial data. Internal pulldown resistor. |+| 32 | SYNCEN | input | Synchronous function enable; when high activates internal synchronization function detecting K28.5 comma pattern (0011 1110 10) and realigning data on byte boundaries if required; when low disables framing. Internal pullup resistor. |+| 33 | RXN | input | Differential serial input receive negative; part of PECL-compatible differential receiver input interface from copper or optical interface module; minimum differential input voltage 200 mV. |+| 34 | RXP | input | Differential serial input receive positive; part of PECL-compatible differential receiver input interface from copper or optical interface module; receiver common mode voltage 1.0 to 2.25 V. |+| 35 | GNDA | power_in | Analog ground; provides ground reference for high-speed analog circuits, receiver, and transmitter. |+| 36 | VDDPLL | power_in | PLL power supply; provides power for PLL circuitry; requires additional filtering capacitance of 0.01 µF; voltage 2.3 to 2.7 V nominal 2.5 V. |+| 37 | VDDA | power_in | Analog power supply; provides power for high-speed analog circuits, receiver, and transmitter; voltage 2.3 to 2.7 V nominal 2.5 V. |+| 38 | TXP | output | Differential serial output transmit positive; PECL-compatible differential output to copper or optical interface module; 600 to 1100 mV output voltage with 50 Ω termination; held high-impedance when LOOPEN is high. |+| 39 | TXN | output | Differential serial output transmit negative; PECL-compatible differential output to copper or optical interface module; held high-impedance when LOOPEN is high. |+| 40 | GNDA | power_in | Analog ground; provides ground reference for high-speed analog circuits, receiver, and transmitter. |+| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-40-EP(6x6) |+| Category | Interface |+| Pins | 41 |++## CAD (KiCad official)++- Symbol: `TLK1221RHAR`+- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`+- 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)+- 3D model files: `tlk1221rhar-etched.step` / `tlk1221rhar-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlk1221rhar.step` / `tlk1221rhar.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlk1221) (21 pp, sha256 `77f33e3761f86a29`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlk1221rhar-datasheet.pdf)
page.jsonadded+343
@@ -0,0 +1,343 @@+{+  "slug": "tlk1221rhar",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Ethernet Transceivers, VQFN-40-EP(6x6). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "tlk1221rhar",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tlk1221rhar.kicad_sym",+    "tlk1221rhar.kicad_mod",+    "tlk1221rhar.glb",+    "tlk1221rhar.step",+    "tlk1221rhar.lbr",+    "docs/hero.png",+    "docs/tlk1221rhar-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLK1221RHAR",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-40-EP(6x6)",+    "pin_count": 41,+    "category": "Interface",+    "subcategory": "Ethernet Transceivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tlk1221",+    "parts": {+      "symbol": "tlk1221rhar.kicad_sym",+      "footprint": "tlk1221rhar.kicad_mod",+      "model_3d": "tlk1221rhar-etched.glb",+      "model_3d_plain": "tlk1221rhar.glb",+      "model_3d_step": "tlk1221rhar-etched.step",+      "model_3d_step_plain": "tlk1221rhar.step",+      "lbr": "tlk1221rhar.lbr"+    },+    "distributor_links": {+      "lcsc": "C527435"+    },+    "pins": [+      {+        "number": "1",+        "name": "ENABLE",+        "type": "input",+        "description": "Device enable; when held low, all circuits are disabled for ultralow-power Iddq testing; when held high, device operates normally. Internal pullup resistor."+      },+      {+        "number": "2",+        "name": "TD0",+        "type": "input",+        "description": "Transmit data bit 0; part of 10-bit parallel data input clocked on rising edge of REFCLK."+      },+      {+        "number": "3",+        "name": "TD1",+        "type": "input",+        "description": "Transmit data bit 1; part of 10-bit parallel data input clocked on rising edge of REFCLK."+      },+      {+        "number": "4",+        "name": "TD2",+        "type": "input",+        "description": "Transmit data bit 2; part of 10-bit parallel data input clocked on rising edge of REFCLK."+      },+      {+        "number": "5",+        "name": "TD3",+        "type": "input",+        "description": "Transmit data bit 3; part of 10-bit parallel data input clocked on rising edge of REFCLK."+      },+      {+        "number": "6",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital logic power supply for all digital circuitry and digital I/O buffers; 2.3 to 2.7 V nominal 2.5 V."+      },+      {+        "number": "7",+        "name": "TD4",+        "type": "input",+        "description": "Transmit data bit 4; part of 10-bit parallel data input clocked on rising edge of REFCLK."+      },+      {+        "number": "8",+        "name": "TD5",+        "type": "input",+        "description": "Transmit data bit 5; part of 10-bit parallel data input clocked on rising edge of REFCLK."+      },+      {+        "number": "9",+        "name": "TD6",+        "type": "input",+        "description": "Transmit data bit 6; part of 10-bit parallel data input clocked on rising edge of REFCLK."+      },+      {+        "number": "10",+        "name": "TD7",+        "type": "input",+        "description": "Transmit data bit 7; part of 10-bit parallel data input clocked on rising edge of REFCLK."+      },+      {+        "number": "11",+        "name": "TD8",+        "type": "input",+        "description": "Transmit data bit 8; part of 10-bit parallel data input clocked on rising edge of REFCLK."+      },+      {+        "number": "12",+        "name": "TD9",+        "type": "input",+        "description": "Transmit data bit 9; last bit of 10-bit parallel data input clocked on rising edge of REFCLK; transmitted as first bit."+      },+      {+        "number": "13",+        "name": "RBCMODE",+        "type": "input",+        "description": "Receive byte clock mode select; when low selects TBI half-rate mode (30-65 MHz on RBC0, RBC1); when high selects TBI full-rate mode (60-130 MHz on RBC0). Internal pulldown resistor."+      },+      {+        "number": "14",+        "name": "REFCLK",+        "type": "input",+        "description": "Reference clock input (60 MHz to 130 MHz); synchronizes receiver and transmitter interface; used to register transmit data (TD0-TD9) on rising edge."+      },+      {+        "number": "15",+        "name": "LOOPEN",+        "type": "input",+        "description": "Loop enable; when high activates internal loopback path routing transmitted serial data to receiver for self-test; TXP and TXN held high-impedance during loopback. Internal pulldown resistor."+      },+      {+        "number": "16",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital logic power supply for all digital circuitry and digital I/O buffers; 2.3 to 2.7 V nominal 2.5 V."+      },+      {+        "number": "17",+        "name": "RBC0",+        "type": "output",+        "description": "Receive byte clock 0; recovered clock for synchronizing 10-bit output data on RD0-RD9; in half-rate mode at one-half data rate, in full-rate mode at 1/10th serial data rate."+      },+      {+        "number": "18",+        "name": "RBC1",+        "type": "output",+        "description": "Receive byte clock 1; recovered clock for synchronizing 10-bit output data on RD0-RD9; in half-rate mode 180 degrees out of phase with RBC0 at one-half data rate; in full-rate mode held low."+      },+      {+        "number": "19",+        "name": "RD9",+        "type": "output",+        "description": "Receive data bit 9; last bit of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1."+      },+      {+        "number": "20",+        "name": "RD8",+        "type": "output",+        "description": "Receive data bit 8; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1."+      },+      {+        "number": "21",+        "name": "RD7",+        "type": "output",+        "description": "Receive data bit 7; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1."+      },+      {+        "number": "22",+        "name": "RD6",+        "type": "output",+        "description": "Receive data bit 6; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1."+      },+      {+        "number": "23",+        "name": "RD5",+        "type": "output",+        "description": "Receive data bit 5; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1."+      },+      {+        "number": "24",+        "name": "RD4",+        "type": "output",+        "description": "Receive data bit 4; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1."+      },+      {+        "number": "25",+        "name": "RD3",+        "type": "output",+        "description": "Receive data bit 3; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1."+      },+      {+        "number": "26",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital logic power supply for all digital circuitry and digital I/O buffers; 2.3 to 2.7 V nominal 2.5 V."+      },+      {+        "number": "27",+        "name": "RD2",+        "type": "output",+        "description": "Receive data bit 2; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1."+      },+      {+        "number": "28",+        "name": "RD1",+        "type": "output",+        "description": "Receive data bit 1; part of 10-bit parallel data output from transceiver; referenced to RBC0 and RBC1."+      },+      {+        "number": "29",+        "name": "RD0",+        "type": "output",+        "description": "Receive data bit 0; first bit received; part of 10-bit parallel data output from transceiver to protocol layer; referenced to RBC0 and RBC1."+      },+      {+        "number": "30",+        "name": "SYNC/PASS",+        "type": "output",+        "description": "Synchronous detect output asserted high upon detection of K28.5 comma pattern when SYNCEN is high; in PRBS test mode (PRBSEN = high) outputs PRBS test results (high = pass)."+      },+      {+        "number": "31",+        "name": "PRBSEN",+        "type": "input",+        "description": "PRBS enable; when high enables PRBS generation on transmit side and PRBS verification on receive side; allows bit-error-rate testing of serial data. Internal pulldown resistor."+      },+      {+        "number": "32",+        "name": "SYNCEN",+        "type": "input",+        "description": "Synchronous function enable; when high activates internal synchronization function detecting K28.5 comma pattern (0011 1110 10) and realigning data on byte boundaries if required; when low disables framing. Internal pullup resistor."+      },+      {+        "number": "33",+        "name": "RXN",+        "type": "input",+        "description": "Differential serial input receive negative; part of PECL-compatible differential receiver input interface from copper or optical interface module; minimum differential input voltage 200 mV."+      },+      {+        "number": "34",+        "name": "RXP",+        "type": "input",+        "description": "Differential serial input receive positive; part of PECL-compatible differential receiver input interface from copper or optical interface module; receiver common mode voltage 1.0 to 2.25 V."+      },+      {+        "number": "35",+        "name": "GNDA",+        "type": "power_in",+        "description": "Analog ground; provides ground reference for high-speed analog circuits, receiver, and transmitter."+      },+      {+        "number": "36",+        "name": "VDDPLL",+        "type": "power_in",+        "description": "PLL power supply; provides power for PLL circuitry; requires additional filtering capacitance of 0.01 µF; voltage 2.3 to 2.7 V nominal 2.5 V."+      },+      {+        "number": "37",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply; provides power for high-speed analog circuits, receiver, and transmitter; voltage 2.3 to 2.7 V nominal 2.5 V."+      },+      {+        "number": "38",+        "name": "TXP",+        "type": "output",+        "description": "Differential serial output transmit positive; PECL-compatible differential output to copper or optical interface module; 600 to 1100 mV output voltage with 50 Ω termination; held high-impedance when LOOPEN is high."+      },+      {+        "number": "39",+        "name": "TXN",+        "type": "output",+        "description": "Differential serial output transmit negative; PECL-compatible differential output to copper or optical interface module; held high-impedance when LOOPEN is high."+      },+      {+        "number": "40",+        "name": "GNDA",+        "type": "power_in",+        "description": "Analog ground; provides ground reference for high-speed analog circuits, receiver, and transmitter."+      },+      {+        "number": "41",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed thermal pad (QFN package bottom) is referenced as GNDQFN or digital ground in the datasheet ",+          "exposed pad 41 added from the footprint",+          "17/41 pins cited to the wrong page (name found elsewhere): ['3:TD1@p7', '4:TD2@p7', '5:TD3@p7', '7:TD4@p7']"+        ],+        "pages_sent": 21,+        "cost_usd": 0.7348,+        "at": "2026-09-22T04:10:45"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tlk1221",+        "pages": 21,+        "sha256": "77f33e3761f86a29",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 41,+        "described": 41,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file