← Commit history

Initial commit: component/tlk105rhbr

Ray ·c9c5419ac4 ·
2 files changed +364
README.mdadded+70
@@ -0,0 +1,70 @@+# TLK105RHBR++**Texas Instruments** · Ethernet Transceivers · VQFN-32-EP(5x5)++TLK105RHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RXD_3 / PHYAD4 | output | Receive Data 3 or PHY Address 4; decoded receive data symbol output synchronous to RX_CLK with weak internal pulldown for address configuration. |+| 2 | TX_CLK | output | Transmit Clock providing 25MHz or 2.5MHz reference clock for MII mode; constant phase relationship to REF_CLK. |+| 3 | TX_EN | input | Transmit Enable active-high input indicating valid data on TXD[3:0] in MII or TXD[1:0] in RMII mode with internal pulldown. |+| 4 | TXD_0 | input | Transmit Data 0 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode. |+| 5 | TXD_1 | input | Transmit Data 1 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode. |+| 6 | TXD_2 | input | Transmit Data 2 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode. |+| 7 | TXD_3 | input | Transmit Data 3 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode. |+| 8 | INT / PWDN | bidirectional | Interrupt/Power Down open-drain output with weak internal pullup; default active-low power-down control, configurable as active-low interrupt output via register access. |+| 9 | RD- | bidirectional | Receive Differential Minus pair input accepting 100Base-TX or 10Base-T signaling with 3.3V bias; in Auto-MDIX can serve as transmit output with 16kV HBM ESD protection. |+| 10 | RD+ | bidirectional | Receive Differential Plus pair input accepting 100Base-TX or 10Base-T signaling with 3.3V bias; in Auto-MDIX can serve as transmit output with 16kV HBM ESD protection. |+| 11 | TD- | bidirectional | Transmit Differential Minus pair output configured for 10Base-T or 100Base-TX signaling with 3.3V bias; in Auto-MDIX can serve as receive input with 16kV HBM ESD protection. |+| 12 | TD+ | bidirectional | Transmit Differential Plus pair output configured for 10Base-T or 100Base-TX signaling with 3.3V bias; in Auto-MDIX can serve as receive input with 16kV HBM ESD protection. |+| 13 | PFBIN1 | power_in | Power Feedback Input 1 fed from PFBOUT in single-supply operation or external 1.55V supply in dual-supply operation; 0.1µF bypass capacitor required. |+| 14 | AVDD33 | power_in | Analog 3.3V power supply for AFE and analog circuitry; 10µF and 0.1µF bypass capacitors required close to pin. |+| 15 | PFBOUT | power_out | Power Feedback Output from internal regulator in single-supply operation; requires 10µF and 0.1µF capacitors and connection to PFBIN1/PFBIN2. |+| 16 | RBIAS | passive | Bias Resistor connection point; connect 4.87kΩ 1% resistor from this pin to GND for bias current generation. |+| 17 | LED_LINK / AN_0 | output | LED Link output or Auto-Negotiation Mode select; indicates link status (Mode 1) or link and activity (Mode 2) with internal pullup for full-duplex configuration. |+| 18 | RESET | input | Active-low reset input with internal pullup; minimum 1µs low pulse initiates full device reset and re-latches hardware configuration pins. |+| 19 | MDIO | bidirectional | Management Data I/O bidirectional signal synchronized to MDC for serial management interface; requires external 2.2kΩ pullup resistor. |+| 20 | MDC | input | Management Data Clock input for serial management interface with maximum rate 25MHz; not required synchronous to TX_CLK or RX_CLK. |+| 21 | VDD_IO | power_in | I/O power supply selectable as 3.3V, 2.5V, or 1.8V (MII mode only) for digital I/O logic levels with decoupling capacitor required. |+| 22 | XO | output | Crystal oscillator output for crystal connection; leave floating when external CMOS-level oscillator connected to XI pin. |+| 23 | XI | input | Crystal/Oscillator input accepting 25MHz (MII) or 50MHz (RMII) reference clock with ±50ppm tolerance from external oscillator or crystal resonator. |+| 24 | PFBIN2 | power_in | Power Feedback Input 2 fed from PFBOUT in single-supply operation or external 1.55V supply in dual-supply operation; 0.1µF bypass capacitor required. |+| 25 | RX_CLK | output | Receive Clock output providing 25MHz or 2.5MHz recovered clock derived from received data stream in MII mode; unused in RMII mode. |+| 26 | RX_DV / MII_MODE | output | Receive Data Valid output or Mode select configuration pin; indicates valid data on RXD[3:0] for MII or RXD[1:0] for RMII with internal pulldown; strapping sets MII/RMII mode. |+| 27 | CRS / CRS_DV / LED_CFG | output | Carrier Sense or Carrier Sense/Receive Data Valid output or LED Configuration pin; asserts high when receive medium non-idle in MII/RMII with internal pullup. |+| 28 | RX_ER / AMDIX_EN | output | Receive Error output indicating error symbol detection synchronous to RX_CLK or Auto-MDIX Enable configuration pin with internal pullup. |+| 29 | COL / PHYAD0 | output | Collision Detect output or PHY Address 0; asserts high in half-duplex when both transmit and receive media active; always low in full-duplex with internal pullup. |+| 30 | RXD_0 / PHYAD1 | output | Receive Data 0 or PHY Address 1; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration. |+| 31 | RXD_1 / PHYAD2 | output | Receive Data 1 or PHY Address 2; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration. |+| 32 | RXD_2 / PHYAD3 | output | Receive Data 2 or PHY Address 3; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration. |+| 33 | GND | power_in | Ground and exposed thermal pad on bottom of package; must be soldered for thermal performance; thermal via guidelines: 0.2mm vias, 4 vias minimum, 2mm center-to-center spacing. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32-EP(5x5) |+| Category | Interface |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `TLK105RHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `tlk105rhbr-etched.step` / `tlk105rhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlk105rhbr.step` / `tlk105rhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlk105) (101 pp, sha256 `348238b64fbb769a`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlk105rhbr-datasheet.pdf)
page.jsonadded+294
@@ -0,0 +1,294 @@+{+  "slug": "tlk105rhbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Ethernet Transceivers, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "tlk105rhbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tlk105rhbr.kicad_sym",+    "tlk105rhbr.kicad_mod",+    "tlk105rhbr.glb",+    "tlk105rhbr.step",+    "tlk105rhbr.lbr",+    "docs/hero.png",+    "docs/tlk105rhbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLK105RHBR",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-32-EP(5x5)",+    "pin_count": 33,+    "category": "Interface",+    "subcategory": "Ethernet Transceivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tlk105",+    "parts": {+      "symbol": "tlk105rhbr.kicad_sym",+      "footprint": "tlk105rhbr.kicad_mod",+      "model_3d": "tlk105rhbr-etched.glb",+      "model_3d_plain": "tlk105rhbr.glb",+      "model_3d_step": "tlk105rhbr-etched.step",+      "model_3d_step_plain": "tlk105rhbr.step",+      "lbr": "tlk105rhbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C337498"+    },+    "pins": [+      {+        "number": "1",+        "name": "RXD_3 / PHYAD4",+        "type": "output",+        "description": "Receive Data 3 or PHY Address 4; decoded receive data symbol output synchronous to RX_CLK with weak internal pulldown for address configuration."+      },+      {+        "number": "2",+        "name": "TX_CLK",+        "type": "output",+        "description": "Transmit Clock providing 25MHz or 2.5MHz reference clock for MII mode; constant phase relationship to REF_CLK."+      },+      {+        "number": "3",+        "name": "TX_EN",+        "type": "input",+        "description": "Transmit Enable active-high input indicating valid data on TXD[3:0] in MII or TXD[1:0] in RMII mode with internal pulldown."+      },+      {+        "number": "4",+        "name": "TXD_0",+        "type": "input",+        "description": "Transmit Data 0 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."+      },+      {+        "number": "5",+        "name": "TXD_1",+        "type": "input",+        "description": "Transmit Data 1 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."+      },+      {+        "number": "6",+        "name": "TXD_2",+        "type": "input",+        "description": "Transmit Data 2 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."+      },+      {+        "number": "7",+        "name": "TXD_3",+        "type": "input",+        "description": "Transmit Data 3 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."+      },+      {+        "number": "8",+        "name": "INT / PWDN",+        "type": "bidirectional",+        "description": "Interrupt/Power Down open-drain output with weak internal pullup; default active-low power-down control, configurable as active-low interrupt output via register access."+      },+      {+        "number": "9",+        "name": "RD–",+        "type": "bidirectional",+        "description": "Receive Differential Minus pair input accepting 100Base-TX or 10Base-T signaling with 3.3V bias; in Auto-MDIX can serve as transmit output with 16kV HBM ESD protection."+      },+      {+        "number": "10",+        "name": "RD+",+        "type": "bidirectional",+        "description": "Receive Differential Plus pair input accepting 100Base-TX or 10Base-T signaling with 3.3V bias; in Auto-MDIX can serve as transmit output with 16kV HBM ESD protection."+      },+      {+        "number": "11",+        "name": "TD–",+        "type": "bidirectional",+        "description": "Transmit Differential Minus pair output configured for 10Base-T or 100Base-TX signaling with 3.3V bias; in Auto-MDIX can serve as receive input with 16kV HBM ESD protection."+      },+      {+        "number": "12",+        "name": "TD+",+        "type": "bidirectional",+        "description": "Transmit Differential Plus pair output configured for 10Base-T or 100Base-TX signaling with 3.3V bias; in Auto-MDIX can serve as receive input with 16kV HBM ESD protection."+      },+      {+        "number": "13",+        "name": "PFBIN1",+        "type": "power_in",+        "description": "Power Feedback Input 1 fed from PFBOUT in single-supply operation or external 1.55V supply in dual-supply operation; 0.1µF bypass capacitor required."+      },+      {+        "number": "14",+        "name": "AVDD33",+        "type": "power_in",+        "description": "Analog 3.3V power supply for AFE and analog circuitry; 10µF and 0.1µF bypass capacitors required close to pin."+      },+      {+        "number": "15",+        "name": "PFBOUT",+        "type": "power_out",+        "description": "Power Feedback Output from internal regulator in single-supply operation; requires 10µF and 0.1µF capacitors and connection to PFBIN1/PFBIN2."+      },+      {+        "number": "16",+        "name": "RBIAS",+        "type": "passive",+        "description": "Bias Resistor connection point; connect 4.87kΩ 1% resistor from this pin to GND for bias current generation."+      },+      {+        "number": "17",+        "name": "LED_LINK / AN_0",+        "type": "output",+        "description": "LED Link output or Auto-Negotiation Mode select; indicates link status (Mode 1) or link and activity (Mode 2) with internal pullup for full-duplex configuration."+      },+      {+        "number": "18",+        "name": "RESET",+        "type": "input",+        "description": "Active-low reset input with internal pullup; minimum 1µs low pulse initiates full device reset and re-latches hardware configuration pins."+      },+      {+        "number": "19",+        "name": "MDIO",+        "type": "bidirectional",+        "description": "Management Data I/O bidirectional signal synchronized to MDC for serial management interface; requires external 2.2kΩ pullup resistor."+      },+      {+        "number": "20",+        "name": "MDC",+        "type": "input",+        "description": "Management Data Clock input for serial management interface with maximum rate 25MHz; not required synchronous to TX_CLK or RX_CLK."+      },+      {+        "number": "21",+        "name": "VDD_IO",+        "type": "power_in",+        "description": "I/O power supply selectable as 3.3V, 2.5V, or 1.8V (MII mode only) for digital I/O logic levels with decoupling capacitor required."+      },+      {+        "number": "22",+        "name": "XO",+        "type": "output",+        "description": "Crystal oscillator output for crystal connection; leave floating when external CMOS-level oscillator connected to XI pin."+      },+      {+        "number": "23",+        "name": "XI",+        "type": "input",+        "description": "Crystal/Oscillator input accepting 25MHz (MII) or 50MHz (RMII) reference clock with ±50ppm tolerance from external oscillator or crystal resonator."+      },+      {+        "number": "24",+        "name": "PFBIN2",+        "type": "power_in",+        "description": "Power Feedback Input 2 fed from PFBOUT in single-supply operation or external 1.55V supply in dual-supply operation; 0.1µF bypass capacitor required."+      },+      {+        "number": "25",+        "name": "RX_CLK",+        "type": "output",+        "description": "Receive Clock output providing 25MHz or 2.5MHz recovered clock derived from received data stream in MII mode; unused in RMII mode."+      },+      {+        "number": "26",+        "name": "RX_DV / MII_MODE",+        "type": "output",+        "description": "Receive Data Valid output or Mode select configuration pin; indicates valid data on RXD[3:0] for MII or RXD[1:0] for RMII with internal pulldown; strapping sets MII/RMII mode."+      },+      {+        "number": "27",+        "name": "CRS / CRS_DV / LED_CFG",+        "type": "output",+        "description": "Carrier Sense or Carrier Sense/Receive Data Valid output or LED Configuration pin; asserts high when receive medium non-idle in MII/RMII with internal pullup."+      },+      {+        "number": "28",+        "name": "RX_ER / AMDIX_EN",+        "type": "output",+        "description": "Receive Error output indicating error symbol detection synchronous to RX_CLK or Auto-MDIX Enable configuration pin with internal pullup."+      },+      {+        "number": "29",+        "name": "COL / PHYAD0",+        "type": "output",+        "description": "Collision Detect output or PHY Address 0; asserts high in half-duplex when both transmit and receive media active; always low in full-duplex with internal pullup."+      },+      {+        "number": "30",+        "name": "RXD_0 / PHYAD1",+        "type": "output",+        "description": "Receive Data 0 or PHY Address 1; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration."+      },+      {+        "number": "31",+        "name": "RXD_1 / PHYAD2",+        "type": "output",+        "description": "Receive Data 1 or PHY Address 2; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration."+      },+      {+        "number": "32",+        "name": "RXD_2 / PHYAD3",+        "type": "output",+        "description": "Receive Data 2 or PHY Address 3; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration."+      },+      {+        "number": "33",+        "name": "GND",+        "type": "power_in",+        "description": "Ground and exposed thermal pad on bottom of package; must be soldered for thermal performance; thermal via guidelines: 0.2mm vias, 4 vias minimum, 2mm center-to-center spacing."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins 1, 30-32 and 29 have multiplexed functions (RXD/PHYAD and COL/PHYAD0) that are sampled at diffe",+          "1/33 pins cited to the wrong page (name found elsewhere): ['33:GND@p36']"+        ],+        "pages_sent": 101,+        "cost_usd": 1.1165,+        "at": "2026-09-24T08:28:37"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tlk105",+        "pages": 101,+        "sha256": "348238b64fbb769a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 33,+        "described": 33,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file