main
Ray
Publish 0.1.0
5606d95
TLI49611MXTSA1
Infineon Technologies · Magnetic Sensors · SOT-23
TLI49611MXTSA1 from Infineon Technologies, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage pin, operating range 3.0 V to 32 V (absolute maximum -18 V to 32 V, 42 V for 10 h without external resistor). |
| 2 | Q | output | Open-drain output with overcurrent and overtemperature protection, output current 0 to 25 mA, output voltage -0.3 V to 32 V operating, current limit 30 to 70 mA. |
| 3 | GND | power_in | Ground reference pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOT-23 |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (abs max) | VDD | -18 | 32 | V | 13 | ||
| Supply voltage (abs max, short term) | VDD | 42 | V | 10h, no external resistor required | 13 | ||
| Output voltage (abs max) | VQ | -0.5 | 32 | V | 13 | ||
| Reverse output current | IQ | -70 | mA | 13 | |||
| Junction temperature (abs max) | TJ | -40 | 150 | °C | for 2000h | 13 | |
| Storage temperature | TS | -40 | 150 | °C | 13 | ||
| ESD voltage (HBM) | VESD | -4 | 4 | kV | R = 1.5 kΩ, C = 100 pF | 13 | |
| ESD voltage (CDM) | VESD | -1 | 1 | kV | 13 | ||
| ESD voltage (system level) | VESD | -15 | 15 | kV | with circuit shown in Figure 3-1 & Figure 3-2 | 13 | |
| Supply voltage (operating) | VDD | 3 | 32 | V | 14 | ||
| Output voltage (operating) | VQ | -0.3 | 32 | V | 14 | ||
| Junction temperature (operating) | Tj | -40 | 125 | °C | 14 | ||
| Output current (operating) | IQ | 0 | 25 | mA | 14 | ||
| Magnetic signal input frequency | fSW | 0 | 10 | kHz | 14 | ||
| Supply current | IS | 1.1 | 1.6 | 2.5 | mA | 14 | |
| Reverse current | ISR | 0.05 | 1 | mA | for VDD = -18 V | 14 | |
| Output saturation voltage | VQSAT | 0.2 | 0.5 | V | IQ = 20 mA | 14 | |
| Output saturation voltage | VQSAT | 0.24 | 0.6 | V | IQ = 25 mA | 14 | |
| Output leakage current | IQLEAK | 10 | μA | 14 | |||
| Output current limitation | IQLIMIT | 30 | 56 | 70 | mA | internally limited & thermal shutdown | 14 |
| Output fall time | tf | 0.17 | 0.4 | 1 | μs | 1.2 kΩ / 50 pF, see Figure 2-3 | 14 |
| Output rise time | tr | 0.4 | 0.5 | 1 | μs | 1.2 kΩ / 50 pF, see Figure 2-3 | 14 |
| Output jitter | tQJ | 0.35 | 1 | μs | For square wave signal with 1 kHz | 14 | |
| Delay time | td | 12 | 15 | 30 | μs | see Figure 2-3 | 14 |
| Power-on time | tPON | 80 | 150 | μs | VDD = 3 V, B ≤ BRP - 0.5 mT or B ≥ BOP + 0.5 mT | 14 | |
| Operating point | BOP | 0.6 | 2.1 | 3.6 | mT | T = -40 °C | 15 |
| Operating point | BOP | 0.5 | 2 | 3.5 | mT | T = 25 °C | 15 |
| Operating point | BOP | 0.3 | 1.8 | 3.2 | mT | T = 125 °C | 15 |
| Release point | BRP | -3.6 | -2.1 | -0.6 | mT | T = -40 °C | 15 |
| Release point | BRP | -3.5 | -2 | -0.5 | mT | T = 25 °C | 15 |
| Release point | BRP | -3.2 | -1.8 | -0.3 | mT | T = 125 °C | 15 |
| Hysteresis | BHYS | 2.5 | 4.2 | 5.9 | mT | T = -40 °C | 15 |
| Hysteresis | BHYS | 2.4 | 4 | 5.6 | mT | T = 25 °C | 15 |
| Hysteresis | BHYS | 2.1 | 3.2 | 5 | mT | T = 125 °C | 15 |
| Thermal resistance junction ambient | RthJA | 300 | K/W | for PG-SOT23-3-15 (2s2p) | 13 | ||
| Thermal resistance junction lead | RthJL | 100 | K/W | for PG-SOT23-3-15 | 13 | ||
| Chopper frequency | fOSC | 350 | kHz | 14 | |||
| Effective noise value of the magnetic switching points | BNeff | 62 | μT | T = 25 °C | 15 | ||
| Temperature compensation of magnetic thresholds | TC | -1200 | ppm/K | 15 |
CAD (KiCad official)
- Symbol:
TLI49611MXTSA1 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
tli49611mxtsa1-etched.step/tli49611mxtsa1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tli49611mxtsa1.step/tli49611mxtsa1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (21 pp, sha256
7e1313856432ff5b, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLI49611MXTSA1
**Infineon Technologies** · Magnetic Sensors · SOT-23
TLI49611MXTSA1 from Infineon Technologies, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage pin, operating range 3.0 V to 32 V (absolute maximum -18 V to 32 V, 42 V for 10 h without external resistor). |
| 2 | Q | output | Open-drain output with overcurrent and overtemperature protection, output current 0 to 25 mA, output voltage -0.3 V to 32 V operating, current limit 30 to 70 mA. |
| 3 | GND | power_in | Ground reference pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOT-23 |
| Category | Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (abs max) | VDD | -18 | | 32 | V | | 13 |
| Supply voltage (abs max, short term) | VDD | | | 42 | V | 10h, no external resistor required | 13 |
| Output voltage (abs max) | VQ | -0.5 | | 32 | V | | 13 |
| Reverse output current | IQ | -70 | | | mA | | 13 |
| Junction temperature (abs max) | TJ | -40 | | 150 | °C | for 2000h | 13 |
| Storage temperature | TS | -40 | | 150 | °C | | 13 |
| ESD voltage (HBM) | VESD | -4 | | 4 | kV | R = 1.5 kΩ, C = 100 pF | 13 |
| ESD voltage (CDM) | VESD | -1 | | 1 | kV | | 13 |
| ESD voltage (system level) | VESD | -15 | | 15 | kV | with circuit shown in Figure 3-1 & Figure 3-2 | 13 |
| Supply voltage (operating) | VDD | 3 | | 32 | V | | 14 |
| Output voltage (operating) | VQ | -0.3 | | 32 | V | | 14 |
| Junction temperature (operating) | Tj | -40 | | 125 | °C | | 14 |
| Output current (operating) | IQ | 0 | | 25 | mA | | 14 |
| Magnetic signal input frequency | fSW | 0 | | 10 | kHz | | 14 |
| Supply current | IS | 1.1 | 1.6 | 2.5 | mA | | 14 |
| Reverse current | ISR | | 0.05 | 1 | mA | for VDD = -18 V | 14 |
| Output saturation voltage | VQSAT | | 0.2 | 0.5 | V | IQ = 20 mA | 14 |
| Output saturation voltage | VQSAT | | 0.24 | 0.6 | V | IQ = 25 mA | 14 |
| Output leakage current | IQLEAK | | | 10 | μA | | 14 |
| Output current limitation | IQLIMIT | 30 | 56 | 70 | mA | internally limited & thermal shutdown | 14 |
| Output fall time | tf | 0.17 | 0.4 | 1 | μs | 1.2 kΩ / 50 pF, see Figure 2-3 | 14 |
| Output rise time | tr | 0.4 | 0.5 | 1 | μs | 1.2 kΩ / 50 pF, see Figure 2-3 | 14 |
| Output jitter | tQJ | | 0.35 | 1 | μs | For square wave signal with 1 kHz | 14 |
| Delay time | td | 12 | 15 | 30 | μs | see Figure 2-3 | 14 |
| Power-on time | tPON | | 80 | 150 | μs | VDD = 3 V, B ≤ BRP - 0.5 mT or B ≥ BOP + 0.5 mT | 14 |
| Operating point | BOP | 0.6 | 2.1 | 3.6 | mT | T = -40 °C | 15 |
| Operating point | BOP | 0.5 | 2 | 3.5 | mT | T = 25 °C | 15 |
| Operating point | BOP | 0.3 | 1.8 | 3.2 | mT | T = 125 °C | 15 |
| Release point | BRP | -3.6 | -2.1 | -0.6 | mT | T = -40 °C | 15 |
| Release point | BRP | -3.5 | -2 | -0.5 | mT | T = 25 °C | 15 |
| Release point | BRP | -3.2 | -1.8 | -0.3 | mT | T = 125 °C | 15 |
| Hysteresis | BHYS | 2.5 | 4.2 | 5.9 | mT | T = -40 °C | 15 |
| Hysteresis | BHYS | 2.4 | 4 | 5.6 | mT | T = 25 °C | 15 |
| Hysteresis | BHYS | 2.1 | 3.2 | 5 | mT | T = 125 °C | 15 |
| Thermal resistance junction ambient | RthJA | | 300 | | K/W | for PG-SOT23-3-15 (2s2p) | 13 |
| Thermal resistance junction lead | RthJL | | 100 | | K/W | for PG-SOT23-3-15 | 13 |
| Chopper frequency | fOSC | | 350 | | kHz | | 14 |
| Effective noise value of the magnetic switching points | BNeff | | 62 | | μT | T = 25 °C | 15 |
| Temperature compensation of magnetic thresholds | TC | | -1200 | | ppm/K | | 15 |
## CAD (KiCad official)
- Symbol: `TLI49611MXTSA1`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `tli49611mxtsa1-etched.step` / `tli49611mxtsa1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tli49611mxtsa1.step` / `tli49611mxtsa1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Infineon Technologies datasheet](docs/tli49611mxtsa1-datasheet.pdf) (21 pp, sha256 `7e1313856432ff5b`, retrieved 2026-10-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tli49611mxtsa1-datasheet.pdf)