component
TLE8366EVXUMA1
Public Made by Adomby adom
Infineon Technologies DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 16d ago |
| viewers | 16d ago |
| package.json | 16d ago |
| page.json | 16d ago |
| README.md | 16d ago |
| tle8366evxuma1-etched.glb | 16d ago |
| tle8366evxuma1-etched.step | 16d ago |
| tle8366evxuma1-hero.glb | 16d ago |
| tle8366evxuma1-hero.overlay.json | 16d ago |
| tle8366evxuma1.glb | 16d ago |
| tle8366evxuma1.kicad_mod | 16d ago |
| tle8366evxuma1.kicad_sym | 16d ago |
| tle8366evxuma1.lbr | 16d ago |
| tle8366evxuma1.step | 16d ago |
TLE8366EVXUMA1
Infineon Technologies · DC-DC Converters · SOIC-8
TLE8366EVXUMA1 from Infineon Technologies, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SYNC | input | Synchronization input for locking the switching frequency to an external clock between 200 and 530 kHz; connect to GND if unused. Absolute range is -0.3 V to 5.5 V (6.2 V for t < 10 s). |
| 2 | GND | power_in | Ground reference for all voltages; the exposed pad must also be connected to GND and the heatsink area by low-inductance wiring. |
| 3 | COMP | input | Compensation input for regulation loop stability; connect an RC compensation network to GND, as leaving it open may cause unstable operation. Absolute range is -0.3 V to 5.5 V (6.2 V for t < 10 s). |
| 4 | FB | input | Feedback input; the TLE8366EV connects it through a voltage divider and the fixed versions connect it directly to the output capacitor. Absolute range is -0.3 V to 10 V for TLE8366EV50/EV33 and -0.3 V to 5.5 V for TLE8366EV. |
| 5 | BDS | power_in | Buck driver supply input for the bootstrap capacitor, which connects between this pin and BUO. Absolute range is VBUO - 0.3 V to VBUO + 5.5 V. |
| 6 | BUO | output | Buck switch output, the source of the integrated power DMOS, which connects directly to the catch diode cathode and buck inductance. Absolute range is -2.0 V to VS + 0.3 V. |
| 7 | EN | input | Active-high enable input with integrated pull-down; high is valid from 3.0 V and low is valid up to 0.8 V, with an absolute range of -40 V to 45 V. |
| 8 | VS | power_in | Supply voltage input with a functional range of 4.75 V to 45 V and an absolute maximum range of -0.3 V to 45 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Synchronization input voltage | VSYNC | -0.3 | 5.5 | V | 5 | ||
| Synchronization input voltage | VSYNC | 6.2 | V | t < 10s | 5 | ||
| Compensation input voltage | VCOMP | -0.3 | 5.5 | V | 5 | ||
| Compensation input voltage | VCOMP | 6.2 | V | t < 10s | 5 | ||
| Feedback input voltage | VFB | -0.3 | 5.5 | V | TLE8366EV | 5 | |
| Buck switch output voltage | VBUO | -2 | V | 5 | |||
| Enable input voltage | VEN | -40 | 45 | V | 5 | ||
| Supply voltage input voltage | VVS | -0.3 | 45 | V | 5 | ||
| Junction temperature | Tj | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 5 | ||
| ESD resistivity HBM | VESD | -2 | 2 | kV | HBM | 5 | |
| ESD resistivity to GND | VESD | -500 | 500 | V | CDM | 5 | |
| ESD resistivity corner pins to GND | VESD | -750 | 750 | V | CDM | 5 | |
| Supply voltage | VS | 4.75 | 45 | V | 6 | ||
| Output voltage adjust range | VCC | 0.6 | 16 | V | TLE8366EV | 6 | |
| Buck inductor | LBU | 18 | 56 | µH | 6 | ||
| Buck capacitor | CBU1 | 33 | 120 | µF | 6 | ||
| Buck capacitor ESR | ESRBU1 | 0.3 | Ω | 6 | |||
| Junction temperature (operating) | Tj | -40 | 150 | °C | 6 | ||
| Output voltage | VFB | 0.588 | 0.6 | 0.612 | V | TLE8366EV; VEN = VS; FB connected to VCC; VS = 12V; 0.1A < ICC < 1.0A | 9 |
| Output voltage | VFB | 0.576 | 0.6 | 0.624 | V | TLE8366EV; VEN = VS; FB connected to VCC; VS = 12V; 1mA < ICC < 1.8A | 9 |
| Minimum output load requirement | ICC,MIN | 1.5 | mA | TLE8366EV; VCC > 3V | 10 | ||
| Minimum output load requirement | ICC,MIN | 5 | mA | TLE8366EV; VCC > 1.5V | 10 | ||
| Minimum output load requirement | ICC,MIN | 10 | mA | TLE8366EV; VCC ≥ 0.6V | 10 | ||
| FB input current | IFB | -1 | -0.1 | 0 | µA | TLE8366EV; VFB = 0.6V | 10 |
| Power stage on-resistance | Ron | 500 | mΩ | tested at 300 mA | 10 | ||
| Buck peak over current limit | IBUOC | 2.2 | 3.6 | A | 10 | ||
| Charge pump current | ICP | 2 | mA | VS = 12V; VBUO = VBDS = GND | 10 | ||
| Charge pump switch-off threshold | VBDS - VBUO | 5 | V | (VBDS - VBUO) increasing | 10 | ||
| Maximum duty cycle | Dmax | 100 | % | 10 | |||
| Soft start ramp | tstart | 350 | 500 | 750 | µs | VFB rising from 5% to 95% of VFB,nom | 10 |
| Input under voltage shutdown threshold | VS,off | 3.75 | V | VS decreasing | 10 | ||
| Input voltage startup threshold | VS,on | 4.75 | V | VS increasing | 10 | ||
| Input under voltage shutdown hysteresis | VS,hyst | 150 | mV | 10 | |||
| Current consumption, shut down mode | Iq,OFF | 0.1 | 2 | µA | VEN = 0.8V; Tj < 105°C; VS = 16V | 12 | |
| Current consumption, active mode | Iq,ON | 7 | mA | VEN = 5.0V; ICC = 0mA; VS = 16V; FB connected to VOUT | 12 | ||
| Current consumption, active mode | Iq,ON | 10 | mA | VEN = 5.0V; ICC = 1.8A; VS = 16V; FB connected to VOUT | 12 | ||
| Enable high signal valid | VEN,lo | 3 | V | 12 | |||
| Enable low signal valid | VEN,hi | 0.8 | V | 12 | |||
| Enable hysteresis | VEN,HY | 50 | 200 | 400 | mV | 12 | |
| Enable high input current | IEN,hi | 30 | µA | VEN = 16V | 12 | ||
| Enable low input current | IEN,lo | 0.1 | 1 | µA | VEN = 0.5V | 12 | |
| Over temperature shutdown | Tj,sd | 160 | 175 | 190 | °C | 12 | |
| Oscillator frequency | fosc | 330 | 370 | 420 | kHz | VSYNC = 0V | 13 |
| Synchronization capture range | fsync | 200 | 530 | kHz | 13 | ||
| SYNC signal high level valid | VSYNC,hi | 2.9 | V | 13 | |||
| SYNC signal low level valid | VSYNC,lo | 0.8 | V | 13 | |||
| SYNC input internal pull-down | RSYNC | 0.6 | 1 | 1.4 | MΩ | VSYNC = 5V | 13 |
| Additional compensation capacitance at COMP (tantalum buck capacitor) | CCOMP2 | 5 | nF | Tantalum CBU1 with ESR up to 300 mΩ | 14 | ||
| Buck converter divider cross current (adjustable version) | IR2 | 300 | µA | minimum, FB resistor divider | 16 | ||
| Junction to case thermal resistance | RthJC | 10 | 12 | K/W | 6 | ||
| Junction to ambient thermal resistance | RthJA | 52 | K/W | JEDEC JESD52-1,-5,-7; natural convection; 2s2p FR4 PCB; 1 W power dissipation | 6 |
CAD (KiCad official)
- Symbol:
TLE8366EVXUMA1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tle8366evxuma1-etched.step/tle8366evxuma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tle8366evxuma1.step/tle8366evxuma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (19 pp, sha256
d0e1caa065207bda, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).