main
Ray Publish 0.1.0 bc0d940

TLE5012BE5000XUMA1

Infineon Technologies · Angle, Linear Position Sensors · SO-8

TLE5012BE5000XUMA1 from Infineon Technologies, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IFC bidirectional Interface C pin (CLK / IIF_IDX / HS3) serves as external clock input for the PLL, IIF index, or Hall switch signal 3, and the external clock feature is not available in IIF or HSM interface mode.
2 SCK input SSC clock input.
3 CSQ input SSC chip select input.
4 DATA bidirectional SSC data line, push-pull by default and configurable to open-drain via the SSC_OD bit.
5 IFA bidirectional Interface A pin (IIF_A / HS1 / PWM / SPC) carries IIF phase A, Hall switch signal 1, or the PWM/SPC output, and is an input for SPC trigger only.
6 VDD power_in Supply voltage; the application circuits specify 3.0 to 5.5 V.
7 GND power_in Ground.
8 IFB output Interface B output carrying IIF phase B or Hall switch signal 2.

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package SO-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage on VDD pin with respect to ground (VSS) VDD -0.5 6.5 V Max 40 h/Lifetime 16
Voltage on any pin with respect to ground (VSS) VIN -0.5 6.5 V 16
Junction temperature TJ -40 150 °C 16
Junction temperature (long-term) TJ 150 °C For 1000 h, not additive 16
Magnetic field induction B 200 mT Max. 5 min @ TA = 25°C 16
Magnetic field induction B 150 mT Max. 5 h @ TA = 25°C 16
Storage temperature TST -40 150 °C Without magnetic field 16
Supply voltage VDD 3 5 5.5 V Note 1): directly blocked with 100-nF ceramic capacitor 16
Supply current IDD 14 16 mA 16
Magnetic induction at TJ = 25°C BXY 30 50 mT -40°C < TJ < 150°C 16
Magnetic induction at TJ = 25°C BXY 30 60 mT -40°C < TJ < 100°C 16
Magnetic induction at TJ = 25°C BXY 30 70 mT -40°C < TJ < 85°C 16
Extended magnetic induction range at TJ = 25°C BXY 25 30 mT Additional angle error of 0.1° 16
Angle range Ang 0 360 ° 16
POR level VPOR 2 2.9 V Power-on reset 16
Power-on time tPon 5 7 ms VDD > VDDmin; 17
Input voltage VIN -0.3 5.5 V 18
Output current (DATA-Pad), sink current IQ -25 mA PAD_DRV='0x'; max. current to GND over open-drain output; at VDD = 5 V 18
Output current (DATA-Pad), sink current IQ -5 mA PAD_DRV='10'; at VDD = 5 V 18
Output current (DATA-Pad), sink current IQ -0.4 mA PAD_DRV='11'; at VDD = 5 V 18
Output current (IFA / IFB / IFC-Pad), sink current IQ -15 mA PAD_DRV='0x' 18
Output current (IFA / IFB / IFC-Pad), sink current IQ -5 mA PAD_DRV='1x' 18
Input signal low-level VL5 0.3 VDD 4.5 V < VDD < 5.5 V 19
Input signal high level VH5 0.7 VDD 4.5 V < VDD < 5.5 V 19
Output signal low-level (DATA) VOL5 1 V 4.5 V < VDD < 5.5 V; DATA; IQ = -25 mA (PAD_DRV='0x'), IQ = -5 mA (PAD_DRV='10'), IQ = -0.4 mA (PAD_DRV='11') 19
Output signal low-level (IFA,B,C) VOL5 1 V 4.5 V < VDD < 5.5 V; IFA,B,C; IQ = -15 mA (PAD_DRV='0x'), IQ = -5 mA (PAD_DRV='1x') 19
Pull-up current (CSQ) IPU -225 -10 µA 4.5 V < VDD < 5.5 V; CSQ 19
Pull-up current (DATA) IPU -150 -10 µA 4.5 V < VDD < 5.5 V; DATA 19
Pull-down current (SCK) IPD 10 225 µA 4.5 V < VDD < 5.5 V; SCK 19
Pull-down current (IFA, IFB, IFC) IPD 10 150 µA 4.5 V < VDD < 5.5 V; IFA, IFB, IFC 19
Output signal low-level (DATA) VOL3 0.9 V 3.0 V < VDD < 3.6 V; DATA; IQ = -15 mA (PAD_DRV='0x'), IQ = -3 mA (PAD_DRV='10'), IQ = -0.24 mA (PAD_DRV='11') 19
Output signal low-level (IFA,IFB) VOL3 0.9 V 3.0 V < VDD < 3.6 V; IFA,IFB; IQ = -10 mA (PAD_DRV='0x'), IQ = -3 mA (PAD_DRV='1x') 19
Pull-up current (CSQ) IPU -225 -3 µA 3.0 V < VDD < 3.6 V; CSQ 19
Pull-up current (DATA) IPU -150 -3 µA 3.0 V < VDD < 3.6 V; DATA 19
Pull-down current (SCK) IPD 3 225 µA 3.0 V < VDD < 3.6 V; SCK 19
Pull-down current (IFA, IFB, IFC) IPD 3 150 µA 3.0 V < VDD < 3.6 V; IFA, IFB, IFC 19
ESD voltage (HBM) VHBM -4 4 kV Human Body Model, AEC-Q100-002 20
X, Y output range RGADC -23230 23230 digits Operating range 20
X, Y amplitude AX, AY 6000 9500 15781 digits At ambient temperature 20
X, Y amplitude AX, AY 3922 20620 digits Operating range 20
X, Y synchronicity k 87.5 100 112.49 % 20
X, Y offset OX, OY -2048 0 2047 digits 20
X, Y orthogonality error j -11.25 0 11.24 ° 20
Overall angle error (without autocalibration) αErr 1.9 ° Including lifetime and temperature drift 21
PWM output frequency 1 fPWM1 232 244 262 Hz Selectable by IFAB_RES; not subject to production test 33
PWM output frequency 2 fPWM2 464 488 525 Hz Selectable by IFAB_RES; not subject to production test 33
PWM output frequency 3 fPWM3 929 977 1050 Hz Selectable by IFAB_RES; not subject to production test 33
PWM output frequency 4 fPWM4 1855 1953 2099 Hz Selectable by IFAB_RES; not subject to production test 33
Output duty cycle range (absolute angle) DYPWM 6.25 93.75 % Absolute angle; not subject to production test 33
Output duty cycle range (short to GND) DYPWM 0 1 % Short to GND; not subject to production test 33
Output duty cycle range (short to VDD, power loss) DYPWM 99 100 % Short to VDD, power loss; not subject to production test 33
Thermal resistance, junction to air RthJA 150 200 K/W Junction to air; according to JEDEC JESD51-7 47
Position eccentricity (sensor IC in package) -200 200 µm In X- and Y-direction 48
Rotation (sensor IC in package) -3 3 ° Affects zero position offset of sensor 48
Tilt (sensor IC in package) -3 3 ° 48
Thermal resistance, junction to case RthJC 75 K/W Junction to case 47

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Lead Frame Cu Plating Sn 100% > 7 µm 47

CAD (KiCad official)

  • Symbol: TLE5012BE5000XUMA1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: tle5012be5000xuma1-etched.step / tle5012be5000xuma1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tle5012be5000xuma1.step / tle5012be5000xuma1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (51 pp, sha256 9c7f6b6671373462, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF