main
Ray
Publish 0.1.0
6329f2f
TLE4922-XAN-F
Infineon Technologies · Magnetic Sensors · SSO-4
TLE4922-XAN-F from Infineon Technologies, in a SSO-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Supply voltage pin (VDD in the application circuit), operating range 4.5 V to 16 V, absolute maximum -18 V to 18 V, with a 47 nF capacitor and 200 Ω series resistor recommended. |
| 2 | NC | unconnected | Not connected pin; no function is given in the datasheet. |
| 3 | GND | power_in | Ground reference pin of the sensor. |
| 4 | Q | output | Open-drain speed output with continuous ON current up to 8.8 mA, maximum voltage 18 V, and short-circuit current limit of 37 to 52 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SSO-4 |
| Category | Sensors |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (min) | VS | -18 | V | 2 | |||
| Supply voltage (max) | VS | 18 | V | 2 | |||
| Supply voltage AC | VSAC | 30 | V | max. 1 min with RSERIES = 200Ω | 2 | ||
| Output OFF voltage | VQ | -1 | V | max. 60 min @ TA = 25°C | 2 | ||
| Output OFF voltage | VQ | -0.3 | 18 | V | 2 | ||
| Output ON voltage | VQ | 18 | V | 2 | |||
| Junction temperature | TJ | 195 | °C | 3h | 2 | ||
| ESD HBM | ESDHBM | -3 | 3 | kV | HBM according ANSI/ESDA/JEDEC JS-001 | 2 | |
| Supply voltage | VS | 4.5 | 16 | V | 2 | ||
| Continuous output ON current | IQ | 8.8 | mA | 2 | |||
| Operating junction temperature | TJ | -40 | 155 | °C | 2000h | 2 | |
| Frequency range of magnetic input signal | f | 0 | 8000 | Hz | 2 | ||
| Supply current | IS | 3.5 | 5.3 | 7 | mA | 3 | |
| Output saturation voltage | VQSAT | 0.15 | 0.4 | V | IQ = 8.8 mA | 3 | |
| Output leakage current | IQLEAK | 10 | μA | 3 | |||
| Current limit for short-circuit protection | IQSHORT | 37 | 44 | 52 | mA | 3 | |
| Junction temperature for output protection | TPROT | 175 | 195 | 215 | °C | Output will shut down (high impedance) when exceeded | 3 |
| Power on time | tON | 0.7 | 0.9 | ms | 3 | ||
| Output fall time | tf | 2.2 | 2.8 | 3.8 | μs | VLOAD = 5 V, CLOAD =4.7 nF, RLOAD = 1.2 kΩ | 3 |
| Output rise time | tr | 1 | 20 | µs | VLOAD = 5 V, CLOAD =4.7 nF, RLOAD = 1.2 kΩ | 3 | |
| Delay time | td | 12.5 | 18 | 23.5 | μs | VLOAD = 5 V, CLOAD =4.7 nF, RLOAD = 1.2 kΩ, f=5kHz, see Figure 2-1 | 3 |
| Linear Region | BLR | -400 | 400 | mT | 3 | ||
| Peak to peak magnetic hysteresis | BMIN | 2 | 3 | 5.3 | mT | Full frequency range | 3 |
| Peak to peak magnetic hysteresis | BMIN | 2 | 3 | 3.8 | mT | Up to 3kHz signal frequency | 3 |
| Back Bias Magnet Range | BBIAS | -400 | 400 | mT | At Ta=25°C | 3 | |
| Duty Cycle | DC | 40 | 50 | 60 | % | 3 | |
| Duty Cycle incl. EMC | DC | 30 | 50 | 70 | % | Including EMC (magnetic distortion) | 3 |
| Relative phase error in calibrated mode | ϕrel | 0.3 | 1.5 | °crank | Forward and backward rotational direction. Temperature and airgap included. | 3 | |
| Output falling edge repeatability (phase jitter) | ϕjitter | 0.05 | 0.2 | °crank | 99.7 %, 3 pulses out of 1000 above limit. | 3 | |
| Operational IC air-gap | AG | 3.2 | mm | Field strength of 300mT at 0.7mm above surface of back-bias magnet | 5 | ||
| Global run-out | AGGLRO | 0.5 | mm | Difference between min. and max. air-gap over one complete target revolution. | 5 | ||
| Temperature compensation of magnetic hysteresis | TCBmin | -650 | ppm | Temperature range from 25°C to 150°C | 3 | ||
| Number of falling edges to be calibrated | nCalib | 3 | At 4th falling edge full accuracy reached. | 3 | |||
| Thermal resistance junction to ambient | RthJA | 170 | K/W | Typical; decreases with back bias magnet or mold | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Pure tin covering (green lead plating) is used. The product is RoHS (Restriction of Hazardous Substances) compliant and | 8 |
CAD (KiCad official)
- Symbol:
TLE4922-XAN-F - Footprint:
Package_SO:SSO-4_6.7x5.1mm_P2.54mm_Clearance8mm - 3D model: SSO-4 (KiCad packages3D, STEP)
- 3D model files:
tle4922-xan-f-etched.step/tle4922-xan-f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tle4922-xan-f.step/tle4922-xan-f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (11 pp, sha256
ef7acd4e1cba40d2, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLE4922-XAN-F
**Infineon Technologies** · Magnetic Sensors · SSO-4
TLE4922-XAN-F from Infineon Technologies, in a SSO-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Supply voltage pin (VDD in the application circuit), operating range 4.5 V to 16 V, absolute maximum -18 V to 18 V, with a 47 nF capacitor and 200 Ω series resistor recommended. |
| 2 | NC | unconnected | Not connected pin; no function is given in the datasheet. |
| 3 | GND | power_in | Ground reference pin of the sensor. |
| 4 | Q | output | Open-drain speed output with continuous ON current up to 8.8 mA, maximum voltage 18 V, and short-circuit current limit of 37 to 52 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SSO-4 |
| Category | Sensors |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (min) | VS | -18 | | | V | | 2 |
| Supply voltage (max) | VS | | | 18 | V | | 2 |
| Supply voltage AC | VSAC | | | 30 | V | max. 1 min with RSERIES = 200Ω | 2 |
| Output OFF voltage | VQ | -1 | | | V | max. 60 min @ TA = 25°C | 2 |
| Output OFF voltage | VQ | -0.3 | | 18 | V | | 2 |
| Output ON voltage | VQ | | | 18 | V | | 2 |
| Junction temperature | TJ | | | 195 | °C | 3h | 2 |
| ESD HBM | ESDHBM | -3 | | 3 | kV | HBM according ANSI/ESDA/JEDEC JS-001 | 2 |
| Supply voltage | VS | 4.5 | | 16 | V | | 2 |
| Continuous output ON current | IQ | | | 8.8 | mA | | 2 |
| Operating junction temperature | TJ | -40 | | 155 | °C | 2000h | 2 |
| Frequency range of magnetic input signal | f | 0 | | 8000 | Hz | | 2 |
| Supply current | IS | 3.5 | 5.3 | 7 | mA | | 3 |
| Output saturation voltage | VQSAT | | 0.15 | 0.4 | V | IQ = 8.8 mA | 3 |
| Output leakage current | IQLEAK | | | 10 | μA | | 3 |
| Current limit for short-circuit protection | IQSHORT | 37 | 44 | 52 | mA | | 3 |
| Junction temperature for output protection | TPROT | 175 | 195 | 215 | °C | Output will shut down (high impedance) when exceeded | 3 |
| Power on time | tON | | 0.7 | 0.9 | ms | | 3 |
| Output fall time | tf | 2.2 | 2.8 | 3.8 | μs | VLOAD = 5 V, CLOAD =4.7 nF, RLOAD = 1.2 kΩ | 3 |
| Output rise time | tr | 1 | | 20 | µs | VLOAD = 5 V, CLOAD =4.7 nF, RLOAD = 1.2 kΩ | 3 |
| Delay time | td | 12.5 | 18 | 23.5 | μs | VLOAD = 5 V, CLOAD =4.7 nF, RLOAD = 1.2 kΩ, f=5kHz, see Figure 2-1 | 3 |
| Linear Region | BLR | -400 | | 400 | mT | | 3 |
| Peak to peak magnetic hysteresis | BMIN | 2 | 3 | 5.3 | mT | Full frequency range | 3 |
| Peak to peak magnetic hysteresis | BMIN | 2 | 3 | 3.8 | mT | Up to 3kHz signal frequency | 3 |
| Back Bias Magnet Range | BBIAS | -400 | | 400 | mT | At Ta=25°C | 3 |
| Duty Cycle | DC | 40 | 50 | 60 | % | | 3 |
| Duty Cycle incl. EMC | DC | 30 | 50 | 70 | % | Including EMC (magnetic distortion) | 3 |
| Relative phase error in calibrated mode | ϕrel | | 0.3 | 1.5 | °crank | Forward and backward rotational direction. Temperature and airgap included. | 3 |
| Output falling edge repeatability (phase jitter) | ϕjitter | | 0.05 | 0.2 | °crank | 99.7 %, 3 pulses out of 1000 above limit. | 3 |
| Operational IC air-gap | AG | | | 3.2 | mm | Field strength of 300mT at 0.7mm above surface of back-bias magnet | 5 |
| Global run-out | AGGLRO | | | 0.5 | mm | Difference between min. and max. air-gap over one complete target revolution. | 5 |
| Temperature compensation of magnetic hysteresis | TCBmin | | -650 | | ppm | Temperature range from 25°C to 150°C | 3 |
| Number of falling edges to be calibrated | nCalib | | | 3 | | At 4th falling edge full accuracy reached. | 3 |
| Thermal resistance junction to ambient | RthJA | | 170 | | K/W | Typical; decreases with back bias magnet or mold | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Pure tin covering (green lead plating) is used. The product is RoHS (Restriction of Hazardous Substances) compliant and | 8 |
## CAD (KiCad official)
- Symbol: `TLE4922-XAN-F`
- Footprint: `Package_SO:SSO-4_6.7x5.1mm_P2.54mm_Clearance8mm`
- 3D model: SSO-4 (KiCad packages3D, STEP)
- 3D model files: `tle4922-xan-f-etched.step` / `tle4922-xan-f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tle4922-xan-f.step` / `tle4922-xan-f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Infineon Technologies datasheet](docs/tle4922-xan-f-datasheet.pdf) (11 pp, sha256 `ef7acd4e1cba40d2`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tle4922-xan-f-datasheet.pdf)