TLE42754D

{
 "schema": "adom.pads/1",
 "slug": "tle42754d",
 "footprint": "TO-252-4",
 "generated_from": {
  "footprint": "TO-252-4@sha256:37afb57535e0bf46",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -5.04,
   -2.28
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TO-252-4@sha256:37afb57535e0bf46"
 },
 "pad_count": 5,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -5.04,
    -2.28
   ],
   "rot": 0.0,
   "size": [
    2.2,
    0.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "I",
   "type": "power_in",
   "description": "Input supply pin. Regulated input from the vehicle battery / raw supply (operating input up to 42 V; withstands -42 V to 45 V). An input capacitor C_I to GND close to the IC terminals is recommended for compensating line influences.",
   "is_pin1": true,
   "source": {
    "geometry": "TO-252-4.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -5.04,
    -1.14
   ],
   "rot": 0.0,
   "size": [
    2.2,
    0.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "RO",
   "type": "output",
   "description": "Reset Output. Open-collector output driven by the internal reset generator when the output voltage falls below V_Q,rt (typ. 4.65 V). Requires an external pull-up resistor to a positive potential; leave open if the reset function is not needed.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-252-4.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.26,
    0.0
   ],
   "rot": 0.0,
   "size": [
    6.4,
    5.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask"
   ],
   "thermal": false,
   "pin": "3",
   "name": "GND",
   "type": "power_in",
   "description": "Ground. On the TLE42754D (PG-TO252-5), pin 3 is not internally connected as GND on the leads; ground is provided via the TAB. (On the TLE42754G PG-TO263-5, pin 3 is internally connected to the tab.) Connect to system ground. Also the package tab: exposed metal TAB. Serves as the device ground and primary heat-sinking path; connect to the heatsink area / ground plane on the PCB.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-252-4.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -5.04,
    1.14
   ],
   "rot": 0.0,
   "size": [
    2.2,
    0.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "D",
   "type": "passive",
   "description": "Reset Delay Timing. Connect a ceramic capacitor from D to GND to program the power-on/undervoltage reset delay time. Leave open if the reset function is not needed.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-252-4.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -5.04,
    2.28
   ],
   "rot": 0.0,
   "size": [
    2.2,
    0.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "Q",
   "type": "power_out",
   "description": "Regulated Output. 5 V ± 2% output capable of sourcing up to 450 mA with integrated current limiting. Block to GND with an output capacitor C_Q close to the IC terminals, respecting the C_Q/ESR values in the Functional Range table.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-252-4.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}