TLE4267G

{
  "slug": "tle4267g",
  "version": "0.1.0",
  "type": "component",
  "description": "Infineon Technologies Linear Voltage Regulators (LDO), TO-263-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "tle4267g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tle4267g.kicad_sym",
    "tle4267g.kicad_mod",
    "tle4267g.glb",
    "tle4267g.step",
    "tle4267g.lbr",
    "docs/hero.png",
    "docs/tle4267g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tle4267g-hero.glb",
    "tle4267g-hero.overlay.json",
    "tle4267g-etched.glb"
  ],
  "component": {
    "mpn": "TLE4267G",
    "manufacturer": "Infineon Technologies",
    "package": "TO-263-7",
    "pin_count": 8,
    "category": "Power Management ICs",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/512ace6706e65af7702d8aa1feca8ddf.pdf",
    "parts": {
      "symbol": "tle4267g.kicad_sym",
      "footprint": "tle4267g.kicad_mod",
      "model_3d": "tle4267g-hero.glb",
      "model_3d_plain": "tle4267g-etched.glb",
      "model_3d_step": "tle4267g-etched.step",
      "model_3d_step_plain": "tle4267g.step",
      "lbr": "tle4267g.lbr"
    },
    "distributor_links": {
      "lcsc": "C539690"
    },
    "distributor_check": {
      "checked_at": "2026-10-22T21:25:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "I",
        "type": "power_in",
        "description": "Input; block to ground directly at the IC by a ceramic capacitor, with operating range 5.5 V to 40 V."
      },
      {
        "number": "2",
        "name": "E2",
        "type": "input",
        "description": "Inhibit; device is turned on by a High signal on this pin, with an internal pull-down resistor of 100 kΩ."
      },
      {
        "number": "3",
        "name": "RO",
        "type": "output",
        "description": "Reset Output; open-collector output internally connected to the output via a resistor of 30 kΩ."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; connected to rear of chip."
      },
      {
        "number": "5",
        "name": "D",
        "type": "passive",
        "description": "Reset Delay; connect via capacitor to GND to set the reset delay time."
      },
      {
        "number": "6",
        "name": "E6",
        "type": "bidirectional",
        "description": "Hold; see Table 6 for function, this input is connected to output voltage via a pull-up resistor of 50 kΩ."
      },
      {
        "number": "7",
        "name": "Q",
        "type": "power_out",
        "description": "5 V Output; block to GND with 22 μF capacitor, ESR < 3 Ω."
      },
      {
        "number": "8",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: E6 (Hold) type chosen as bidirectional since it is pulled up internally and clamped low by an extern; Datasheet text says ESR < 3 Ω for TO263-7 pin 7 but ≤ 3 Ω elsewhere; copied as printed for this pack"
        ],
        "pages_sent": 20,
        "cost_usd": 0.1058,
        "at": "2026-10-22T21:25:26"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/512ace6706e65af7702d8aa1feca8ddf.pdf",
        "pages": 20,
        "sha256": "5a2251e840984306",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tle4267g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15.0,
          10.0,
          4.42
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "34b8121b216e7b6490402befe573a69b06919acafd33d6e8da88bd238574da52",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tle4267g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15.0,
          10.0,
          4.42
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bef32b49e65b0bd25e9a5cac6cbad53a1f86c0148a47c0bb7150d41a741538cd",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}