main
History Download
Ray Publish 0.1.0 87601c4

TLD5190QU

Infineon Technologies · LED Drivers · TQFP-48-EP(7x7)

TLD5190QU from Infineon Technologies, in a TQFP-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 n.c. unconnected Not connected; tie to AGND on the layout.
2 HSGD1 output Highside gate driver output 1 drives the top n-channel MOSFET at VIVCC_EXT superimposed on SWN1; connect to the gate of the external switching MOSFET.
3 BST1 bidirectional Bootstrap capacitor pin for internal biasing and driving HSGD1; bypass to SWN1 with a capacitor close to the pin and do not leave it open.
4 SWN1 bidirectional Switch node 1 swings from a diode voltage drop below ground up to VIN.
5 PGND1 power_in Power ground for the power potential; connect externally close to the chip.
6 LSGD1 output Lowside gate driver output 1 drives the lowside n-channel MOSFET between GND and VIVCC_EXT; connect to the gate of the external switching MOSFET.
7 LSGD2 output Lowside gate driver output 2 drives the lowside n-channel MOSFET between GND and VIVCC_EXT; connect to the gate of the external switching MOSFET.
8 PGND2 power_in Power ground for the power potential; connect externally close to the chip.
9 SWN2 bidirectional Switch node 2 swings from ground up to a diode voltage drop above VOUT.
10 BST2 bidirectional Bootstrap capacitor pin for internal biasing and driving HSGD2; bypass to SWN2 with a capacitor close to the pin and do not leave it open.
11 HSGD2 output Highside gate driver output 2 drives the top n-channel MOSFET at VIVCC_EXT superimposed on SWN2; connect to the gate of the external switching MOSFET.
12 n.c. unconnected Not connected; tie to AGND on the layout.
13 FBH input Output current feedback positive, non-inverting input (+) of the current sense amplifier.
14 FBL input Output current feedback negative, inverting input (-) of the current sense amplifier.
15 n.c. unconnected Not connected; tie to AGND on the layout.
16 IOUTMON output Output current monitor producing 200 mV + 8 times VFBH-FBL, equal to 1.4 V when VFBH-FBL = 150 mV.
17 SWCS input Current sense input for inductor current measurement, non-inverting input (+); route as a differential net with SGND.
18 SGND power_in Current sense ground, inverting input (-) for the inductor current sense; route as a differential net with SWCS.
19 COMP output Compensation network pin; connect an R and C network for stability and phase margin adjustment.
20 VFB input Voltage loop feedback pin intended to set the output protection functions.
21 VREF power_in Voltage reference output supplying an accurate 2 V for analog dimming and LED temperature compensation; bypass with an external 100 nF capacitor close to the pin and do not leave it open.
22 SET input Analog current sense adjustment pin; a voltage VSET between 0.2 V and 1.5 V adjusts ILED or VOUT in a linear relation.
23 TEST1 passive Test pin used for Infineon end-of-line test; connect to GND in the application.
24 PWMI input Digital PWM control input with 5 V or 3.3 V logic levels; has an integrated pull-down.
25 TEST2 passive Test pin used for Infineon end-of-line test; connect to GND in the application.
26 VSS power_in Digital GPIO ground for the GPIO pins.
27 CLKOUT output Switching oscillator clock output to supply SYNC inputs of other DCDC devices.
28 TEST3 passive Test pin used for Infineon end-of-line test; connect to GND in the application.
29 TEST4 passive Test pin used for Infineon end-of-line test; connect to GND in the application.
30 TEST5 passive Test pin used for Infineon end-of-line test; connect to GND in the application.
31 TEST6 passive Test pin used for Infineon end-of-line test; connect to GND in the application.
32 EF2 output Open-drain error flag 2, pulled LOW when an open load, overvoltage or overtemperature occurs.
33 EF1 output Open-drain error flag 1, pulled LOW when an output short to GND or overtemperature occurs.
34 SYNC input Synchronization input for an external clock signal; has an integrated pull-down.
35 FREQ input Frequency select input; connect an external resistor to GND to set the switching frequency.
36 INOVLO input Input overvoltage protection pin that defines an upper VIN threshold and switches the device off on overvoltage; must not be left open.
37 SPREAD_SPECTRUM input Enables and disables the spread spectrum function to improve EMC performance; has an integrated pull-down.
38 SOFT_START output Soft start configuration pin; connect a capacitor CSOFT_START to GND to fix the soft start ramp time.
39 IINMON output Input current monitor output producing 20 times VIIN1-IIN2, equal to 1 V when VIIN1-VIIN2 = 50 mV.
40 AGND power_in Analog ground serving as the ground reference.
41 EN/INUVLO input Enable and input undervoltage lockout pin that puts the device in a low current consumption mode and sets an undervoltage threshold via external components; has an integrated pull-down and must not be left open.
42 IIN1 input Input current monitor positive, non-inverting input (+); connect to VIN if the input current monitor is not needed.
43 IIN2 input Input current monitor negative, inverting input (-); connect to VIN if the input current monitor is not needed.
44 VIN power_in Power supply voltage and supply for internal biasing; device input supply range is 4.5 V to 40 V.
45 n.c. unconnected Not connected; tie to AGND on the layout.
46 IVCC output Internal LDO output for internal biasing and gate driver supply; bypass with an external capacitor close to the pin and do not leave it open.
47 IVCC_EXT input External LDO input to alternatively supply the internal gate drivers; must be connected to IVCC to use the internal LDO and must not be left open.
48 n.c. unconnected Not connected; tie to AGND on the layout.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package TQFP-48-EP(7x7)
Category Display Modules / LED Drivers / Display Drivers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Input Voltage VIN -0.3 60 V 8
Internal Linear Voltage Regulator Output voltage VIVCC -0.3 6 V 8
External Linear Voltage Regulator Input voltage VIVCC_EXT -0.3 6 V 8
Voltage reference output VREF -0.3 3.6 V 8
Lowside Gatedriver voltage VLSGD1,2-PGND1,2 -0.3 5.5 V 8
Highside Gatedriver voltage VHSGD1,2-SWN1,2 -0.3 5.5 V 8
switching node voltage VSWN1, 2 -1 60 V 8
Boostrap voltage VBST1,2-SWN1,2 -0.3 6 V 8
Boostrap voltage related to GND VBST1, 2 -0.3 65 V 8
Switch Current Sense Input voltage VSWCS -0.3 0.3 V 8
Switch Current Sense differential voltage VSWCS-SGND -0.5 0.5 V 8
Input Current monitor voltage VIIN1, 2 -0.3 60 V 8
Input Current monitor differential voltage VIIN1-IIN2 -0.5 0.5 V 9
Feedback Error Amplifier voltage VFBH, FBL -0.3 60 V 9
Feedback Error Amplifier differential voltage VFBH-FBL -0.5 0.5 V 9
Device enable/input undervoltage lockout VEN/INUVLO -0.3 60 V 9
Digital Input voltage VPWMI -0.3 5.5 V 9
Analog dimming Input voltage VSET -0.3 5.5 V 9
Junction Temperature Tj -40 150 °C 10
Storage Temperature Tstg -55 150 °C 10
ESD Resistivity of all Pins VESD,HBM -2 2 kV HBM 10
Device Extended Supply Voltage Range VVIN 4.5 40 V 10
Device Nominal Supply Voltage Range VVIN 8 36 V 10
Power Stage Voltage Range VPOW 4.5 55 V 10
Junction Temperature (functional range) Tj -40 150 °C 10
Input Voltage Startup VVIN(ON) 4.7 V VIN increasing; VEN/INUVLO = HIGH; IVCC = IVCC_EXT = 10 mA 15
Input Undervoltage switch OFF VVIN(OFF) 4.5 V VIN decreasing; VEN/INUVLO = HIGH; IVCC = IVCC_EXT = 10 mA 15
Device operating current IVIN(ACTIVE) 4.4 6 mA ACTIVE mode; CLKOUT freq. 300 KHz; VPWMI = 0 V 15
VIN Sleep mode supply current IVIN(SLEEP) 1.5 µA VEN/INUVLO = 0 V; VIN = 13.5 V; VIVCC = VIVCC_EXT= 0 V 15
Input Undervoltage falling Threshold VEN/INUVLOth 1.6 1.75 1.9 V 15
EN/INUVLO input Current LOW IEN/INUVLO(LOW) 0.45 0.89 1.34 µA VEN/INUVLO = 0.8 V 15
EN/INUVLO input Current HIGH IEN/INUVLO(HIGH) 1.1 2.2 3.3 µA VEN/INUVLO = 2 V 15
SLEEP mode to ACTIVE time tACTIVE 0.7 ms VIVCC = VIVCC_EXT; CIVCC = 10 µF; VIN = 13.5 V 15
IVCC Output Voltage VIVCC 4.8 5 5.2 V VIN= 13.5 V; 0.1 mA ≤ IIVCC ≤ 50 mA 35
Output Current Limitation ILIM 70 90 110 mA VIVCC = 4 V 35
Drop out Voltage (VIN - VIVCC) VDR 200 350 mV VIN = 5 V; IIVCC = 10 mA 35
IVCC Buffer Capacitor CIVCC 10 µF 35
IVCC_EXT Undervoltage Reset switch OFF Threshold VIVCC_EXT_RTH,d 3.7 3.9 4.1 V VIVCC_EXT decreasing 35
IVCC Undervoltage Reset switch OFF Threshold VIVCC_RTH,d 3.7 3.9 4.1 V VIVCC decreasing 35
VREF voltage VREF 1.94 2 2.06 V 0 ≤ IVREF ≤ 200 µA 35
V(FBH-FBL) threshold V(FBH-FBL) 145.5 150 154.5 mV VSET = 2 V 25
V(FBH-FBL) threshold @ analog dimming 10% V(FBH-FBL)_10 10 15 20 mV VSET = 0.32 V 25
FBH Bias current @ highside sensing setup IFBH_HSS 65 110 155 µA VFBL = 7 V; VFBH - FBL = 150 mV 25
FBL Bias current @ highside sensing setup IFBL_HSS 17 30 43 µA VFBL = 7 V; VFBH - FBL = 150 mV 25
FBH Bias current @ lowside sensing setup IFBH_LSS -7.5 -4 -2.5 µA VFBL = 0 V; VFBH - FBL = 150 mV 25
FBL Bias current @ lowside sensing setup IFBL_LSS -45 -30 -20 µA VFBL = 0 V; VFBH - FBL = 150 mV 25
Output Monitor Voltage VIOUTMON 1.33 1.4 1.47 V VFBH - FBL = 150 mV 25
Maximum BOOST Duty Cycle DBOOST_MAX 89 91 93 % fsw = 300 kHZ 25
Input Current Sense threshold VIIN1-IIN2 46 50 54 mV 25
Input current Monitor Voltage VIINMON 0.95 1 1.05 V VIIN1 - IIN2 = 50 mV; VIIN1 = VVIN(ON) to 55 V 25
Switch Peak Over Current Threshold - BOOST VSWCS_boost 40 50 60 mV 25
Switch Peak Over Current Threshold - BUCK VSWCS_buck -60 -50 -40 mV 25
Switching Frequency fSW 285 300 315 kHz Tj = 25°C; RFREQ= 37.4 kΩ 26
SYNC Frequency fSYNC 200 700 kHz 26
SYNC Turn On Threshold VSYNC,ON 2 V 26
SYNC Turn Off Threshold VSYNC,OFF 0.8 V 26
Over Temperature Shutdown Tj,SD 160 175 190 °C 42
Input Overvoltage rising Threshold VINOVLOth 1.9 2 2.1 V 42
Junction to Case RthJC 0.9 K/W Ta = 25°C; IC dissipating 1 W 11
Junction to Ambient RthJA 25 K/W JEDEC 2s2p board; Ta = 25°C; IC dissipating 1 W 11

CAD (KiCad official)

  • Symbol: TLD5190QU
  • Footprint: Package_QFP:TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm
  • 3D model: TQFP-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: tld5190qu-etched.step / tld5190qu-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tld5190qu.step / tld5190qu.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (59 pp, sha256 6ddf553e0ae09c50, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF