TLC7701QPWR

{
  "slug": "tlc7701qpwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Monitors & Reset Circuits, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tlc7701qpwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlc7701qpwr.kicad_sym",
    "tlc7701qpwr.kicad_mod",
    "tlc7701qpwr.glb",
    "tlc7701qpwr.step",
    "tlc7701qpwr.lbr",
    "docs/hero.png",
    "docs/tlc7701qpwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlc7701qpwr-hero.glb",
    "tlc7701qpwr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TLC7701QPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-8",
    "pin_count": 8,
    "category": "Power Supply Chip",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tlc77",
    "parts": {
      "symbol": "tlc7701qpwr.kicad_sym",
      "footprint": "tlc7701qpwr.kicad_mod",
      "model_3d": "tlc7701qpwr-hero.glb",
      "model_3d_plain": "tlc7701qpwr.glb",
      "model_3d_step": "tlc7701qpwr-etched.step",
      "model_3d_step_plain": "tlc7701qpwr.step",
      "lbr": "tlc7701qpwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2070490",
      "digikey": "TLC7701QPWR-ND",
      "mouser": "595-TLC7701QPWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T15:28:10Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TLC7701QPWR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TLC7701QPWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CONTROL",
        "type": "input",
        "description": "Control input for static-RAM power-down support; when tied to GND, RESET acts as active high, with input levels VIL max 0.2×VDD and VIH min 0.7×VDD."
      },
      {
        "number": "2",
        "name": "RESIN",
        "type": "input",
        "description": "Reset input that, together with CONTROL and SENSE, determines the RESET and RESET output states per the function table, with VIL max 0.2×VDD and VIH min 0.7×VDD."
      },
      {
        "number": "3",
        "name": "CT",
        "type": "passive",
        "description": "External timing capacitor connection that sets the reset delay time td = 2.1 × 10^4 × CT (CT in farads, td in seconds)."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device; all voltage values are with respect to GND."
      },
      {
        "number": "5",
        "name": "RESET",
        "type": "output",
        "description": "Active-low reset output (totem-pole), asserted when VDD reaches 1 V or SENSE is below threshold, rated for 2 mA high or low output current."
      },
      {
        "number": "6",
        "name": "RESET",
        "type": "output",
        "description": "Active-high reset output (totem-pole) with 2 mA recommended output current, which is the complement of the active-low reset output."
      },
      {
        "number": "7",
        "name": "SENSE",
        "type": "input",
        "description": "Voltage-sense input compared to the negative-going threshold (1.1 V typ for TLC7701, set by two external resistors), absolute maximum input range -0.3 to 7 V."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage input, recommended operating range 2 V to 6 V with 7 V absolute maximum, and a 0.1 µF ceramic bypass capacitor recommended nearby."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin 5 and pin 6 overbars were read from the rendered image: pin 5 is the overbarred (active-low); The datasheet does not list pin function descriptions, so the descriptions are inferred from the des",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 38,
        "cost_usd": 0.8872,
        "at": "2026-10-08T15:27:53"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tlc77",
        "pages": 38,
        "sha256": "3147b2830d2531af",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlc7701qpwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cf28a51742b2e31065e201d1b313207140cbfb49062efd938788f7a310d02738",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlc7701qpwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a2f6c4de5e207d88c76517a6990ee307dcf544f373d5c37f4e6d10f4a3ea6ec3",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}