← Commit history

Initial commit: component/tlc7528cdwr

Ray ·220cebb157 ·
2 files changed +269
README.mdadded+56
@@ -0,0 +1,56 @@+# TLC7528CDWR++**Texas Instruments** · Digital To Analog Converters (DAC) · SOIC-20-300mil++TLC7528CDWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AGND | power_in | Analog ground reference shared by DACA and DACB R-2R ladder networks (terminal 1). |+| 2 | OUTA | output | DACA current output summing the R-2R ladder current to AGND; output leakage current up to ±400nA max (VDD=5V, latch=00000000). |+| 3 | RFBA | passive | DACA on-chip feedback resistor terminal, normally connected to an external op-amp output for current-to-voltage conversion; feedback voltage rated ±25V to AGND. |+| 4 | REFA | input | Reference voltage input for DACA; recommended ±10V, absolute maximum ±25V to AGND. |+| 5 | DGND | power_in | Digital ground reference for the input logic and data latch circuitry. |+| 6 | DACA/DACB | input | DAC-select control input: low level directs a write to the DACA latch, high level directs a write to the DACB latch, active only while CS and WR are both low. |+| 7 | DB7 | input | Most significant bit (MSB) of the 8-bit parallel data input bus, TTL-compatible at VDD=5V, data setup time 25ns min. |+| 8 | DB6 | input | Data bit 6 of the 8-bit parallel data input bus. |+| 9 | DB5 | input | Data bit 5 of the 8-bit parallel data input bus. |+| 10 | DB4 | input | Data bit 4 of the 8-bit parallel data input bus. |+| 11 | DB3 | input | Data bit 3 of the 8-bit parallel data input bus. |+| 12 | DB2 | input | Data bit 2 of the 8-bit parallel data input bus. |+| 13 | DB1 | input | Data bit 1 of the 8-bit parallel data input bus. |+| 14 | DB0 | input | Least significant bit (LSB) of the 8-bit parallel data input bus. |+| 15 | CS | input | Chip-select input; must be low together with WR to enable a write to the selected DAC latch, setup time tsu(CS)=50ns min, hold time th(CS)=0ns min. |+| 16 | WR | input | Write strobe input; the addressed DAC latch becomes transparent when WR and CS are both low and latches data when either goes high, minimum WR-low pulse duration tw(WR)=50ns. |+| 17 | VDD | power_in | Positive supply voltage, operating range 5V to 15V (recommended 4.75V-5.25V or 14.5V-15.5V), absolute maximum -0.3V to 16.5V referenced to AGND/DGND. |+| 18 | REFB | input | Reference voltage input for DACB; recommended ±10V, absolute maximum ±25V to AGND. |+| 19 | RFBB | passive | DACB on-chip feedback resistor terminal, normally connected to an external op-amp output for current-to-voltage conversion; feedback voltage rated ±25V to AGND. |+| 20 | OUTB | output | DACB current output summing the R-2R ladder current to AGND; output leakage current up to ±400nA max (VDD=5V, latch=00000000). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-20-300mil |+| Category | Data Acquisition |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `TLC7528CDWR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `tlc7528cdwr-etched.step` / `tlc7528cdwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc7528cdwr.step` / `tlc7528cdwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc7528) (33 pp, sha256 `63cd9d470d8a8f3e`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlc7528cdwr-datasheet.pdf)
page.jsonadded+213
@@ -0,0 +1,213 @@+{+  "slug": "tlc7528cdwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Digital To Analog Converters (DAC), SOIC-20-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "tlc7528cdwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tlc7528cdwr.kicad_sym",+    "tlc7528cdwr.kicad_mod",+    "tlc7528cdwr.glb",+    "tlc7528cdwr.step",+    "tlc7528cdwr.lbr",+    "docs/hero.png",+    "docs/tlc7528cdwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLC7528CDWR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-20-300mil",+    "pin_count": 20,+    "category": "Data Acquisition",+    "subcategory": "Digital To Analog Converters (DAC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tlc7528",+    "parts": {+      "symbol": "tlc7528cdwr.kicad_sym",+      "footprint": "tlc7528cdwr.kicad_mod",+      "model_3d": "tlc7528cdwr-etched.glb",+      "model_3d_plain": "tlc7528cdwr.glb",+      "model_3d_step": "tlc7528cdwr-etched.step",+      "model_3d_step_plain": "tlc7528cdwr.step",+      "lbr": "tlc7528cdwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C527510"+    },+    "pins": [+      {+        "number": "1",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground reference shared by DACA and DACB R-2R ladder networks (terminal 1)."+      },+      {+        "number": "2",+        "name": "OUTA",+        "type": "output",+        "description": "DACA current output summing the R-2R ladder current to AGND; output leakage current up to ±400nA max (VDD=5V, latch=00000000)."+      },+      {+        "number": "3",+        "name": "RFBA",+        "type": "passive",+        "description": "DACA on-chip feedback resistor terminal, normally connected to an external op-amp output for current-to-voltage conversion; feedback voltage rated ±25V to AGND."+      },+      {+        "number": "4",+        "name": "REFA",+        "type": "input",+        "description": "Reference voltage input for DACA; recommended ±10V, absolute maximum ±25V to AGND."+      },+      {+        "number": "5",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground reference for the input logic and data latch circuitry."+      },+      {+        "number": "6",+        "name": "DACA/DACB",+        "type": "input",+        "description": "DAC-select control input: low level directs a write to the DACA latch, high level directs a write to the DACB latch, active only while CS and WR are both low."+      },+      {+        "number": "7",+        "name": "DB7",+        "type": "input",+        "description": "Most significant bit (MSB) of the 8-bit parallel data input bus, TTL-compatible at VDD=5V, data setup time 25ns min."+      },+      {+        "number": "8",+        "name": "DB6",+        "type": "input",+        "description": "Data bit 6 of the 8-bit parallel data input bus."+      },+      {+        "number": "9",+        "name": "DB5",+        "type": "input",+        "description": "Data bit 5 of the 8-bit parallel data input bus."+      },+      {+        "number": "10",+        "name": "DB4",+        "type": "input",+        "description": "Data bit 4 of the 8-bit parallel data input bus."+      },+      {+        "number": "11",+        "name": "DB3",+        "type": "input",+        "description": "Data bit 3 of the 8-bit parallel data input bus."+      },+      {+        "number": "12",+        "name": "DB2",+        "type": "input",+        "description": "Data bit 2 of the 8-bit parallel data input bus."+      },+      {+        "number": "13",+        "name": "DB1",+        "type": "input",+        "description": "Data bit 1 of the 8-bit parallel data input bus."+      },+      {+        "number": "14",+        "name": "DB0",+        "type": "input",+        "description": "Least significant bit (LSB) of the 8-bit parallel data input bus."+      },+      {+        "number": "15",+        "name": "CS",+        "type": "input",+        "description": "Chip-select input; must be low together with WR to enable a write to the selected DAC latch, setup time tsu(CS)=50ns min, hold time th(CS)=0ns min."+      },+      {+        "number": "16",+        "name": "WR",+        "type": "input",+        "description": "Write strobe input; the addressed DAC latch becomes transparent when WR and CS are both low and latches data when either goes high, minimum WR-low pulse duration tw(WR)=50ns."+      },+      {+        "number": "17",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply voltage, operating range 5V to 15V (recommended 4.75V-5.25V or 14.5V-15.5V), absolute maximum -0.3V to 16.5V referenced to AGND/DGND."+      },+      {+        "number": "18",+        "name": "REFB",+        "type": "input",+        "description": "Reference voltage input for DACB; recommended ±10V, absolute maximum ±25V to AGND."+      },+      {+        "number": "19",+        "name": "RFBB",+        "type": "passive",+        "description": "DACB on-chip feedback resistor terminal, normally connected to an external op-amp output for current-to-voltage conversion; feedback voltage rated ±25V to AGND."+      },+      {+        "number": "20",+        "name": "OUTB",+        "type": "output",+        "description": "DACB current output summing the R-2R ladder current to AGND; output leakage current up to ±400nA max (VDD=5V, latch=00000000)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 33,+        "cost_usd": 0.35,+        "at": "2026-09-23T07:05:07"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tlc7528",+        "pages": 33,+        "sha256": "63cd9d470d8a8f3e",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file