component
TLC6C598PWR
Public Made by Adomby adom
Texas Instruments LED Drivers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# TLC6C598PWR++**Texas Instruments** · LED Drivers · TSSOP-16++TLC6C598PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_in | Power supply pin for the device, recommended supply voltage range 3 V to 5.5 V. |+| 2 | SER_IN | input | Serial data input; data on SER_IN loads into the internal register on each rising edge of SRCK. |+| 3 | DRAIN0 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |+| 4 | DRAIN1 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |+| 5 | DRAIN2 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |+| 6 | DRAIN3 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |+| 7 | CLR | input | Shift register clear, active-low; storage register transfers data to output buffer when CLR is high; driving CLR low clears all registers in the device. |+| 8 | G | input | Output enable, active-low; having G low enables all drain channels according to output-latch register content; when G is high, all channels are off. |+| 9 | SER_OUT | output | Serial data output of the 8-bit serial shift register; purpose is to cascade several devices on the serial bus. |+| 10 | RCK | input | Register clock input; data in each shift register stage transfers to the storage register at the rising edge of RCK. |+| 11 | DRAIN4 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |+| 12 | DRAIN5 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |+| 13 | DRAIN6 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |+| 14 | DRAIN7 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |+| 15 | SRCK | input | Serial clock input; on each rising SRCK edge, data transfers from SER_IN to the internal serial shift registers. |+| 16 | GND | power_in | Power ground, the ground reference pin for the device; must connect to the ground plane on the PCB. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | LED Drivers |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TLC6C598PWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `tlc6c598pwr-etched.step` / `tlc6c598pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc6c598pwr.step` / `tlc6c598pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlc6c598.pdf) (25 pp, sha256 `bf5e0782441cafc7`, retrieved 2026-10-01, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlc6c598pwr-datasheet.pdf)
page.jsonadded+205@@ -0,0 +1,205 @@+{+ "slug": "tlc6c598pwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LED Drivers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "tlc6c598pwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tlc6c598pwr.kicad_sym",+ "tlc6c598pwr.kicad_mod",+ "tlc6c598pwr.glb",+ "tlc6c598pwr.step",+ "tlc6c598pwr.lbr",+ "docs/hero.png",+ "docs/tlc6c598pwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TLC6C598PWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://www.ti.com/lit/ds/symlink/tlc6c598.pdf",+ "parts": {+ "symbol": "tlc6c598pwr.kicad_sym",+ "footprint": "tlc6c598pwr.kicad_mod",+ "model_3d": "tlc6c598pwr-etched.glb",+ "model_3d_plain": "tlc6c598pwr.glb",+ "model_3d_step": "tlc6c598pwr-etched.step",+ "model_3d_step_plain": "tlc6c598pwr.step",+ "lbr": "tlc6c598pwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2863406",+ "digikey": "296-47840-2-ND",+ "mouser": "595-TLC6C598PWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T05:45:39Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-47840-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TLC6C598PWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply pin for the device, recommended supply voltage range 3 V to 5.5 V."+ },+ {+ "number": "2",+ "name": "SER_IN",+ "type": "input",+ "description": "Serial data input; data on SER_IN loads into the internal register on each rising edge of SRCK."+ },+ {+ "number": "3",+ "name": "DRAIN0",+ "type": "output",+ "description": "Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode."+ },+ {+ "number": "4",+ "name": "DRAIN1",+ "type": "output",+ "description": "Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode."+ },+ {+ "number": "5",+ "name": "DRAIN2",+ "type": "output",+ "description": "Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode."+ },+ {+ "number": "6",+ "name": "DRAIN3",+ "type": "output",+ "description": "Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode."+ },+ {+ "number": "7",+ "name": "CLR",+ "type": "input",+ "description": "Shift register clear, active-low; storage register transfers data to output buffer when CLR is high; driving CLR low clears all registers in the device."+ },+ {+ "number": "8",+ "name": "G",+ "type": "input",+ "description": "Output enable, active-low; having G low enables all drain channels according to output-latch register content; when G is high, all channels are off."+ },+ {+ "number": "9",+ "name": "SER_OUT",+ "type": "output",+ "description": "Serial data output of the 8-bit serial shift register; purpose is to cascade several devices on the serial bus."+ },+ {+ "number": "10",+ "name": "RCK",+ "type": "input",+ "description": "Register clock input; data in each shift register stage transfers to the storage register at the rising edge of RCK."+ },+ {+ "number": "11",+ "name": "DRAIN4",+ "type": "output",+ "description": "Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode."+ },+ {+ "number": "12",+ "name": "DRAIN5",+ "type": "output",+ "description": "Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode."+ },+ {+ "number": "13",+ "name": "DRAIN6",+ "type": "output",+ "description": "Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode."+ },+ {+ "number": "14",+ "name": "DRAIN7",+ "type": "output",+ "description": "Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode."+ },+ {+ "number": "15",+ "name": "SRCK",+ "type": "input",+ "description": "Serial clock input; on each rising SRCK edge, data transfers from SER_IN to the internal serial shift registers."+ },+ {+ "number": "16",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground, the ground reference pin for the device; must connect to the ground plane on the PCB."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "1/16 pins cited to the wrong page (name found elsewhere): ['5:DRAIN2@p3']"+ ],+ "pages_sent": 25,+ "cost_usd": 0.1173,+ "at": "2026-10-01T05:45:22"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/tlc6c598.pdf",+ "pages": 25,+ "sha256": "bf5e0782441cafc7",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}