component
TLC6C598PWR
Public Made by Adomby adom
Texas Instruments LED Drivers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLC6C598PWR
Texas Instruments · LED Drivers · TSSOP-16
TLC6C598PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply pin for the device, recommended supply voltage range 3 V to 5.5 V. |
| 2 | SER_IN | input | Serial data input; data on SER_IN loads into the internal register on each rising edge of SRCK. |
| 3 | DRAIN0 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |
| 4 | DRAIN1 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |
| 5 | DRAIN2 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |
| 6 | DRAIN3 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |
| 7 | CLR | input | Shift register clear, active-low; storage register transfers data to output buffer when CLR is high; driving CLR low clears all registers in the device. |
| 8 | G | input | Output enable, active-low; having G low enables all drain channels according to output-latch register content; when G is high, all channels are off. |
| 9 | SER_OUT | output | Serial data output of the 8-bit serial shift register; purpose is to cascade several devices on the serial bus. |
| 10 | RCK | input | Register clock input; data in each shift register stage transfers to the storage register at the rising edge of RCK. |
| 11 | DRAIN4 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |
| 12 | DRAIN5 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |
| 13 | DRAIN6 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |
| 14 | DRAIN7 | output | Open-drain output LED current-sink channel with 50-mA continuous current or 200-mA PWM current capability at 5 V, 40-V rated, connect to LED cathode. |
| 15 | SRCK | input | Serial clock input; on each rising SRCK edge, data transfers from SER_IN to the internal serial shift registers. |
| 16 | GND | power_in | Power ground, the ground reference pin for the device; must connect to the ground plane on the PCB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | LED Drivers |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TLC6C598PWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tlc6c598pwr-etched.step/tlc6c598pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc6c598pwr.step/tlc6c598pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
bf5e0782441cafc7, retrieved 2026-10-01, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).