component
TLC5941QPWPRQ1
Public Made by Adomby adom
Texas Instruments LED Drivers, HTSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLC5941QPWPRQ1
Texas Instruments · LED Drivers · HTSSOP-28-EP
TLC5941QPWPRQ1 from Texas Instruments, in a HTSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the device. |
| 2 | BLANK | input | When high it forces all OUTn off and resets the GS counter, and it must be pulled up to VCC with a resistor and set high before the microcontroller sends control signals. |
| 3 | XLAT | input | Level-triggered latch: when high it writes the input shift register data into the GS register (MODE low) or DC register (MODE high), and when low the GS/DC data is held constant. |
| 4 | SCLK | input | Serial data shift clock. |
| 5 | SIN | input | Serial data input. |
| 6 | MODE | input | Mode select: GND selects GS mode and VCC selects DC mode. |
| 7 | OUT0 | output | Constant-current sink output. |
| 8 | OUT1 | output | Constant-current sink output. |
| 9 | OUT2 | output | Constant-current sink output. |
| 10 | OUT3 | output | Constant-current sink output. |
| 11 | OUT4 | output | Constant-current sink output. |
| 12 | OUT5 | output | Constant-current sink output. |
| 13 | OUT6 | output | Constant-current sink output. |
| 14 | OUT7 | output | Constant-current sink output. |
| 15 | OUT8 | output | Constant-current sink output. |
| 16 | OUT9 | output | Constant-current sink output. |
| 17 | OUT10 | output | Constant-current sink output. |
| 18 | OUT11 | output | Constant-current sink output. |
| 19 | OUT12 | output | Constant-current sink output. |
| 20 | OUT13 | output | Constant-current sink output. |
| 21 | OUT14 | output | Constant-current sink output. |
| 22 | OUT15 | output | Constant-current sink output. |
| 23 | XERR | output | Open-drain error output that goes low when LOD or TEF is detected. |
| 24 | SOUT | output | Serial data output. |
| 25 | GSCLK | input | Reference clock for grayscale PWM control. |
| 26 | TEST | input | Test pin that must be connected to VCC. |
| 27 | IREF | bidirectional | Reference current terminal. |
| 28 | VCC | power_in | Power supply voltage that must be powered up before the microcontroller sends control signals. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-28-EP |
| Category | LED Drivers |
| Pins | 29 |
CAD (KiCad official)
- Symbol:
TLC5941QPWPRQ1 - Footprint:
Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm - 3D model: HTSSOP-28-EP (KiCad packages3D, STEP)
- 3D model files:
tlc5941qpwprq1-etched.step/tlc5941qpwprq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc5941qpwprq1.step/tlc5941qpwprq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
4126032fe7efa605, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).